SEAINT

 

INTRO

 

SEARCH
ARCHIVE

 

NEED
A BOOK?

 

2010
Jan-Mar
Apr-Jun
Jul-Sep

 

2009
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2008
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2007
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2006
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2005
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2004
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2003
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2002
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2001
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

2000
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1999
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1998
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

1997
Jan-Jun
Jul-Sep
Oct-Dec

1996
Jan-Jun
Jul-Dec

 

1995
Jul-Dec

 

HOME

Some recommendations...
 
 

 
 

---

SEAINT Mail Archive 2003 (Oct-Dec)

Civil and Structural Engineering discussions by author

www.seaintarchive.org

• About this archive / Index
• Messages sorted by: [Thread] [Subject] [Date]

Site Search: Need a book? Civil and Structural Engineering book recommendations...
 

---

Messages: 2141

• ismet beg
  • message 0012 Thu, 16 Oct 2003 10:48:23 -0600 (MDT)

• yogesh patil
  • pre engineered metal building detailing Tue, 11 Nov 2003 07:00:41 -0700 (MST)

• a . kumar
  • Happy new year Wed, 31 Dec 2003 03:18:16 -0700 (MST)

• Abolhassan Astaneh
  • Info on Bam Quake, and how to help Sun, 28 Dec 2003 18:03:09 -0700 (MST)
  • (Correction on ) Info on Bam Quake, and how to help Sun, 28 Dec 2003 19:09:26 -0700 (MST)

• Adam Vakiener
  • Re: Need references for an Atlanta-area engineers Fri, 12 Dec 2003 05:24:04 -0700 (MST)

• Al Grathwol
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 09:54:49 -0600 (MDT)
  • RE: Thickened Floor Slabs Tue, 7 Oct 2003 11:51:42 -0600 (MDT)
  • RE: Rebar Strengths Thu, 23 Oct 2003 17:51:55 -0600 (MDT)
  • RE: Precast tension stresses Fri, 24 Oct 2003 09:17:27 -0600 (MDT)
  • RE: Glulam Roof Girders in a Tilt-Up Thu, 30 Oct 2003 10:49:07 -0700 (MST)
  • RE: Lynn S. Beedle Fri, 31 Oct 2003 10:17:15 -0700 (MST)
  • RE: Special Inspection Fri, 31 Oct 2003 10:28:57 -0700 (MST)
  • RE: Special Inspection Fri, 31 Oct 2003 12:47:55 -0700 (MST)
  • RE: Seals and signatures Thu, 6 Nov 2003 16:33:27 -0700 (MST)
  • RE: SE Tests Fri, 7 Nov 2003 11:46:30 -0700 (MST)
  • RE: foreigners... gotta love them Thu, 13 Nov 2003 12:24:49 -0700 (MST)
  • RE: foreigners... gotta love them Fri, 14 Nov 2003 10:49:46 -0700 (MST)
  • RE: NO TRIP TO LINCOLN or WHAT HAPPENED TO THE "WESTERN STATES EXAM"? Mon, 17 Nov 2003 14:28:02 -0700 (MST)
  • RE: Flag-Pole Foundations for light framing Wed, 19 Nov 2003 14:55:20 -0700 (MST)
  • Liberal Arts (was RE: Schooling (was Connections)) Thu, 4 Dec 2003 11:52:13 -0700 (MST)
  • IBC 2003 Eqn. 16-50 Thu, 11 Dec 2003 09:39:26 -0700 (MST)
  • RE: CA IBC Thu, 11 Dec 2003 15:46:36 -0700 (MST)
  • Railing clearances Mon, 22 Dec 2003 09:51:57 -0700 (MST)
  • RE: Info on Bam Quake, and how to help Mon, 29 Dec 2003 10:34:04 -0700 (MST)
  • RE: Philosophical Differences Mon, 29 Dec 2003 12:22:16 -0700 (MST)
  • RE: Philosophical Differences Mon, 29 Dec 2003 12:55:06 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 09:20:08 -0700 (MST)
  • Norway Tue, 30 Dec 2003 09:23:53 -0700 (MST)
  • NYTimes Tue, 30 Dec 2003 09:30:49 -0700 (MST)
  • Agree Tue, 30 Dec 2003 09:38:02 -0700 (MST)
  • RE: Old ASTMS Tue, 30 Dec 2003 10:00:09 -0700 (MST)
  • RE: Agree//fantastic!! Tue, 30 Dec 2003 10:24:37 -0700 (MST)

• Al Greene
  • is it working Wed, 15 Oct 2003 14:03:35 -0600 (MDT)
  • Galvanic corrosion Tue, 18 Nov 2003 11:39:35 -0700 (MST)
  • RE: Crane runway bumpers Wed, 19 Nov 2003 10:03:44 -0700 (MST)

• Alan Johnson
  • RE: Happy Thanksgiving, SEAINT Wed, 26 Nov 2003 07:38:33 -0700 (MST)
  • Advice on hydraulic failure to EC7 needed Thu, 11 Dec 2003 09:57:05 -0700 (MST)
  • RE: Advice on hydraulic failure to EC7 needed Thu, 11 Dec 2003 10:10:59 -0700 (MST)
  • RE: oh canada! Fri, 12 Dec 2003 14:52:30 -0700 (MST)

• Albert W. Ford
  • RE: Pipe Analysis Sat, 11 Oct 2003 22:32:36 -0600 (MDT)

• Alden Manipula
  • RE: off topic: AutoCAD drawing presentation in powerpoint Wed, 22 Oct 2003 07:04:19 -0600 (MDT)
  • RE: CMU software Wed, 19 Nov 2003 11:21:35 -0700 (MST)
  • Certification letters Fri, 21 Nov 2003 08:34:15 -0700 (MST)

• Aleces Ari
  • Re: Thickened footings under interior braced walls (Was: RE Hardy Frames) Sat, 25 Oct 2003 23:54:10 -0600 (MDT)
  • Re: Nail embedments Mon, 27 Oct 2003 22:06:42 -0700 (MST)

• Allan Bommer
  • Post-tensioning Software (was Connections) Wed, 3 Dec 2003 11:23:23 -0700 (MST)

• Allison, Tim
  • RE: SICK PROFESSION Tue, 11 Nov 2003 13:51:10 -0700 (MST)
  • Need references for an Atlanta-area engineers Thu, 11 Dec 2003 12:56:31 -0700 (MST)
  • Sheathing Requirements Tue, 16 Dec 2003 13:08:44 -0700 (MST)
  • RE: sound transmission, treated wood Thu, 18 Dec 2003 15:14:16 -0700 (MST)

• Amr Hashem
  • Need help with Structural software Fri, 10 Oct 2003 07:54:52 -0600 (MDT)

• Andrew Kester
  • Engineers on TV Tue, 7 Oct 2003 06:37:05 -0600 (MDT)
  • stopping force/ cmu wall ftgs Wed, 8 Oct 2003 07:05:04 -0600 (MDT)
  • RE: torsion in circular foundations Thu, 9 Oct 2003 08:08:37 -0600 (MDT)
  • PCI Volume 5 Mon, 13 Oct 2003 15:11:46 -0600 (MDT)
  • Plan review? Thu, 16 Oct 2003 06:43:56 -0600 (MDT)
  • Flat plates Wed, 22 Oct 2003 08:07:40 -0600 (MDT)
  • RE: wind loads Thu, 30 Oct 2003 07:35:19 -0700 (MST)
  • New home problems Fri, 31 Oct 2003 10:34:22 -0700 (MST)
  • New home problems- retry Fri, 31 Oct 2003 10:53:22 -0700 (MST)
  • SE Tests Tue, 4 Nov 2003 07:47:12 -0700 (MST)
  • Tests, etc. Thu, 6 Nov 2003 10:30:32 -0700 (MST)
  • thanks Fri, 7 Nov 2003 08:04:31 -0700 (MST)
  • RE: Wind loads Tue, 11 Nov 2003 10:07:12 -0700 (MST)
  • foreigners... gotta love them Wed, 12 Nov 2003 08:04:12 -0700 (MST)
  • truss blocking Thu, 13 Nov 2003 07:35:41 -0700 (MST)
  • shear diaphragms and trusses Fri, 14 Nov 2003 11:19:02 -0700 (MST)
  • shear bolts- glulam Sun, 16 Nov 2003 08:28:05 -0700 (MST)
  • wind loads on fences Thu, 20 Nov 2003 06:16:45 -0700 (MST)
  • drafting Tue, 2 Dec 2003 07:02:17 -0700 (MST)
  • BS Degrees (emphasis on BS) Wed, 3 Dec 2003 06:34:57 -0700 (MST)
  • school, stuff Thu, 4 Dec 2003 07:25:19 -0700 (MST)
  • RE: truss bracing Fri, 5 Dec 2003 07:01:27 -0700 (MST)
  • oh canada! Fri, 12 Dec 2003 07:45:57 -0700 (MST)
  • S.E. Position Tue, 16 Dec 2003 14:00:09 -0700 (MST)
  • tests, job opening Wed, 17 Dec 2003 07:40:31 -0700 (MST)
  • sound transmission, treated wood Thu, 18 Dec 2003 10:26:21 -0700 (MST)
  • cowboys and Indians Tue, 23 Dec 2003 08:01:34 -0700 (MST)
  • suggestion Tue, 30 Dec 2003 09:51:31 -0700 (MST)

• Andy Richardson
  • ASCE wind load question Mon, 3 Nov 2003 08:34:59 -0700 (MST)
  • RE: High-Impact Glazing Thu, 11 Dec 2003 06:00:39 -0700 (MST)

• Angie Baughman
  • RE: Uplift on Belled Drilled Pier Fri, 14 Nov 2003 11:58:12 -0700 (MST)

• ASLCSE
  • Re: Tapered Stem Wall using Enercal Thu, 2 Oct 2003 10:11:10 -0600 (MDT)
  • Re: Thickened footings under interior braced walls (Was: RE Hardy Frames) Sat, 25 Oct 2003 12:06:59 -0600 (MDT)
  • Re: E/O Insurance Tue, 25 Nov 2003 09:54:26 -0700 (MST)
  • Re: E/O Insurance Tue, 25 Nov 2003 10:03:45 -0700 (MST)

• Aswin Rangaswamy
  • Re: Please help admit our friend back Mon, 20 Oct 2003 14:25:14 -0600 (MDT)
  • Re: blast and progressive collapse Fri, 24 Oct 2003 14:45:21 -0600 (MDT)
  • Re: Army/Air Force Technical Documents Wed, 29 Oct 2003 12:39:02 -0700 (MST)
  • Re: Column located on 4" existing concrete slab Thu, 30 Oct 2003 11:34:45 -0700 (MST)
  • Re: Column located on 4" existing concrete slab (Balcony vs Deck) Thu, 30 Oct 2003 14:21:22 -0700 (MST)
  • FEMA Tier3 Analysis - Seismic Factor Thu, 13 Nov 2003 14:43:14 -0700 (MST)
  • SE Review Manual - Wanted Mon, 17 Nov 2003 20:34:15 -0700 (MST)
  • New SE Exam Format (was SE Review Manual - Wanted) Tue, 18 Nov 2003 09:48:51 -0700 (MST)
  • Re: X-braces Wed, 19 Nov 2003 09:19:08 -0700 (MST)
  • Re: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 12:10:28 -0700 (MST)
  • Eliminate Pop-ups (was Re: Tell me what's really on your mind) Tue, 16 Dec 2003 15:02:03 -0700 (MST)
  • Re: SEII results - anyone (CA SE Exam) Tue, 16 Dec 2003 18:21:56 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 18:02:45 -0700 (MST)

• AWC Info
  • Timber pile uplift anchorage... Wed, 12 Nov 2003 10:51:48 -0700 (MST)
  • 2003 IBC load combnations & wood design Thu, 20 Nov 2003 07:29:13 -0700 (MST)
  • Unbraced Length Tue, 16 Dec 2003 14:22:38 -0700 (MST)
  • Re: stone Veneer support Wed, 17 Dec 2003 08:12:46 -0700 (MST)

• Barry H. Welliver
  • RE: Mold Remediation Sat, 11 Oct 2003 09:15:20 -0600 (MDT)
  • RE: Mold Remediation Mon, 13 Oct 2003 07:59:46 -0600 (MDT)
  • RE: SE Tests Tue, 4 Nov 2003 10:44:52 -0700 (MST)
  • RE: 1930's Poured in Place Concrete Building Thu, 20 Nov 2003 15:47:55 -0700 (MST)
  • RE: URM Building per UCBC Wed, 26 Nov 2003 13:31:46 -0700 (MST)
  • RE: Public Relations Fri, 12 Dec 2003 15:04:54 -0700 (MST)
  • RE: stone Veneer support Tue, 16 Dec 2003 08:03:13 -0700 (MST)
  • RE: Paso Robles Earthquake Fri, 26 Dec 2003 09:18:34 -0700 (MST)
  • RE: Paso Robles Earthquake Fri, 26 Dec 2003 09:20:54 -0700 (MST)
  • RE: Paso Robles Earthquake Fri, 26 Dec 2003 10:49:34 -0700 (MST)
  • RE: Paso Robles Earthquake Fri, 26 Dec 2003 14:17:24 -0700 (MST)

• BCainse
  • Re: New home problems Sat, 1 Nov 2003 20:23:24 -0700 (MST)
  • Re: Seismic design of walls Wed, 3 Dec 2003 21:37:19 -0700 (MST)
  • Re: Schooling (was Connections) Wed, 3 Dec 2003 22:27:00 -0700 (MST)
  • Re: Creosote Ban? Sat, 6 Dec 2003 18:42:35 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Sat, 20 Dec 2003 13:37:07 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 20:43:41 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 21:21:22 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 21:30:14 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 21:33:39 -0700 (MST)

• bcinc
  • Re: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 18:04:01 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 22:00:03 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 22:46:48 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 23:27:17 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 23:39:22 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 23:47:10 -0700 (MST)
  • Re: Failed Outsourcing Sat, 20 Dec 2003 07:16:11 -0700 (MST)
  • Re: What can I do about it? (Onshoring and Offshoring) Sat, 20 Dec 2003 07:23:02 -0700 (MST)
  • Re: H-1B lawsuit Sat, 20 Dec 2003 07:31:25 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Sat, 20 Dec 2003 10:29:23 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Sat, 20 Dec 2003 10:34:39 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Sat, 20 Dec 2003 13:38:17 -0700 (MST)

• Ben Yousefi
  • Plan Check (was Re: Rigid Wood Diaphragm?) Wed, 15 Oct 2003 17:48:57 -0600 (MDT)
  • Re: Plan Check (was Re: Rigid Wood Diaphragm?) Wed, 15 Oct 2003 18:35:16 -0600 (MDT)
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 08:49:18 -0600 (MDT)
  • RE: Hyatt Regency Collapse (was:E: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 15:46:56 -0600 (MDT)
  • Re: Seismic Load Factors Mon, 20 Oct 2003 15:47:17 -0600 (MDT)
  • Re: Hardy Frames Thu, 23 Oct 2003 10:49:25 -0600 (MDT)
  • RE: Connections Wed, 26 Nov 2003 12:45:45 -0700 (MST)
  • Re: Was connections .. Tue, 2 Dec 2003 09:12:47 -0700 (MST)
  • Re: Seismic design of walls Wed, 3 Dec 2003 15:32:17 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 09:06:02 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 11:40:38 -0700 (MST)
  • California's new Emergency Structural Amendments Fri, 5 Dec 2003 09:51:56 -0700 (MST)
  • RE: California's new Emergency Structural Amendments Fri, 5 Dec 2003 14:31:22 -0700 (MST)
  • Re: AISC Seismic for ASD Fri, 5 Dec 2003 16:11:37 -0700 (MST)
  • Re: IBC 2003 Eqn. 16-50 Thu, 11 Dec 2003 10:08:54 -0700 (MST)
  • Re: Vibration design practice for condominiums Wed, 17 Dec 2003 10:36:35 -0700 (MST)
  • Re: Misc Comments Thu, 18 Dec 2003 10:05:58 -0700 (MST)
  • Re: Railing clearances Mon, 22 Dec 2003 10:01:57 -0700 (MST)
  • Re: consistency Mon, 22 Dec 2003 18:19:10 -0700 (MST)
  • Re: Info on Bam Quake, and how to help Mon, 29 Dec 2003 08:58:54 -0700 (MST)

• Ben Zhou
  • Weld bolts Mon, 13 Oct 2003 16:00:47 -0600 (MDT)
  • Re: Weld bolts Mon, 3 Nov 2003 22:46:05 -0700 (MST)

• Bernard, Scott C.
  • RE: Creosote Ban? Thu, 4 Dec 2003 14:15:10 -0700 (MST)
  • RE: Cedar Thu, 4 Dec 2003 14:17:13 -0700 (MST)

• Bill Allen
  • Proposed roof design Wed, 1 Oct 2003 14:12:12 -0600 (MDT)
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 11:27:25 -0600 (MDT)
  • RE: Fibermesh Topping Slab Thu, 2 Oct 2003 11:52:56 -0600 (MDT)
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 14:34:27 -0600 (MDT)
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 15:01:04 -0600 (MDT)
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 15:09:19 -0600 (MDT)
  • RE: Proposed roof design Fri, 3 Oct 2003 07:53:11 -0600 (MDT)
  • Rigid Wood Diaphragm? Thu, 9 Oct 2003 16:42:04 -0600 (MDT)
  • RE: Rigid Wood Diaphragm? Fri, 10 Oct 2003 11:04:58 -0600 (MDT)
  • Hardy Frames Thu, 23 Oct 2003 10:32:13 -0600 (MDT)
  • RE: Hardy Frames Fri, 24 Oct 2003 10:47:47 -0600 (MDT)
  • RE: Glulam Roof Girders in a Tilt-Up Wed, 29 Oct 2003 07:08:25 -0700 (MST)
  • RE: Glulam Roof Girders in a Tilt-Up Wed, 29 Oct 2003 09:44:01 -0700 (MST)
  • RE: Column located on 4" existing concrete slab Wed, 29 Oct 2003 23:21:46 -0700 (MST)
  • RE: Glulam Roof Girders in a Tilt-Up Wed, 29 Oct 2003 23:23:09 -0700 (MST)
  • RE: Reusing Foundations (was: SE Tests) Tue, 4 Nov 2003 08:11:51 -0700 (MST)
  • RE: SE Tests Tue, 4 Nov 2003 10:46:08 -0700 (MST)
  • RE: SE Tests Tue, 4 Nov 2003 11:00:45 -0700 (MST)
  • RE: SE Tests Thu, 6 Nov 2003 18:01:38 -0700 (MST)
  • RE: SE Tests Thu, 6 Nov 2003 18:59:43 -0700 (MST)
  • RE: SE Tests Fri, 7 Nov 2003 08:35:31 -0700 (MST)
  • RE: SE Test Fri, 7 Nov 2003 14:02:22 -0700 (MST)
  • RE: SE Tests Fri, 7 Nov 2003 15:25:06 -0700 (MST)
  • RE: SE Test Sat, 8 Nov 2003 09:10:09 -0700 (MST)
  • RE: SE Test Sat, 8 Nov 2003 17:30:07 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 10:01:49 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 13:14:06 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 15:47:42 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 10:33:39 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 13:16:41 -0700 (MST)
  • Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 16:53:35 -0700 (MST)
  • RE: Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 16:58:10 -0700 (MST)
  • RE: Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 21:20:26 -0700 (MST)
  • RE: Paul Fratessa: GOOD RIDDANCE Thu, 13 Nov 2003 09:35:06 -0700 (MST)
  • RE: E/O Insurance Fri, 21 Nov 2003 12:11:14 -0700 (MST)
  • RE: Connections Wed, 26 Nov 2003 14:34:42 -0700 (MST)
  • RE: Connections Fri, 28 Nov 2003 09:11:49 -0700 (MST)
  • RE: California's new Emergency Structural Amendments Fri, 5 Dec 2003 10:01:21 -0700 (MST)
  • Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 09:08:38 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 11:41:44 -0700 (MST)
  • More on Staggered Nails (Was: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 11:55:45 -0700 (MST)
  • RE: Keeping the American Spirit Alive Thu, 11 Dec 2003 14:20:46 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 16:33:17 -0700 (MST)
  • UBC Section 1815 Tue, 16 Dec 2003 11:35:22 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) STA Fri, 19 Dec 2003 09:58:37 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 11:11:30 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 23:25:58 -0700 (MST)
  • RE: Holiday Differences [humor] Mon, 22 Dec 2003 14:46:50 -0700 (MST)
  • RE: consistency Mon, 22 Dec 2003 19:05:05 -0700 (MST)
  • RE: consistency Tue, 23 Dec 2003 08:26:17 -0700 (MST)
  • RE: Fee for Custom Residence Wed, 24 Dec 2003 13:03:12 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - S Fri, 26 Dec 2003 12:11:49 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - S Fri, 26 Dec 2003 12:32:40 -0700 (MST)
  • RE: Philosophical Differences Tue, 30 Dec 2003 08:56:38 -0700 (MST)

• Bill Polhemus
  • Re: QUESTION REGARDING WIND UPLIFT Tue, 7 Oct 2003 09:03:17 -0600 (MDT)
  • RE: Is 'List Server' up or down Wed, 15 Oct 2003 16:54:40 -0600 (MDT)
  • Q: Flatness Tolerances for Residential Slab Thu, 16 Oct 2003 20:17:39 -0600 (MDT)
  • RE: Test 2 Mon, 20 Oct 2003 07:17:58 -0600 (MDT)
  • RE: Concrete Text Books Wed, 22 Oct 2003 07:56:56 -0600 (MDT)
  • Plumbing Penetrations through Post-Tensioned Foundation (Or: No Good Deed Goes Unpunished) Thu, 23 Oct 2003 09:08:36 -0600 (MDT)
  • Residential Construction Performance Guidelines (WAS: Q: Flatness Tolerances for Residential Slab) Mon, 27 Oct 2003 10:17:02 -0700 (MST)
  • INFO REQ: Source for Scrap or Surplus Sheet Pile Tue, 28 Oct 2003 06:31:23 -0700 (MST)
  • Floating Stiffened Slab Supported on Piers Fri, 31 Oct 2003 13:45:46 -0700 (MST)
  • RE: New home problems Fri, 31 Oct 2003 15:00:06 -0700 (MST)
  • RE: Regional permitting differences - calculations Thu, 6 Nov 2003 10:52:24 -0700 (MST)
  • RE: Sick Profession? Thu, 6 Nov 2003 11:00:32 -0700 (MST)
  • RE: SE Tests Thu, 6 Nov 2003 11:08:37 -0700 (MST)
  • Floating Stiffened Slab on Piers Fri, 7 Nov 2003 08:44:22 -0700 (MST)
  • RE: 4U2C Sun, 9 Nov 2003 06:44:54 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 10:51:00 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 11:01:27 -0700 (MST)
  • RE: Outsourcing - Part I (was Sick Profession) a response to Stan Caldwell Mon, 10 Nov 2003 17:29:48 -0700 (MST)
  • RE: SICK PROFESSION Wed, 12 Nov 2003 03:22:52 -0700 (MST)
  • RE: SICK PROFESSION Wed, 12 Nov 2003 03:29:20 -0700 (MST)
  • RE: SICK PROFESSION Wed, 12 Nov 2003 03:37:05 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 10:13:49 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 10:58:47 -0700 (MST)
  • RE: SICK PROFESSION Wed, 12 Nov 2003 11:01:26 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 11:40:57 -0700 (MST)
  • RE: SICK PROFESSION Wed, 12 Nov 2003 14:25:12 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 14:27:10 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 14:28:28 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 14:29:56 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 14:31:22 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 14:31:50 -0700 (MST)
  • RE: foreigners... gotta love them Thu, 13 Nov 2003 05:31:38 -0700 (MST)
  • RE: Jobs vs. political parties Thu, 13 Nov 2003 05:38:53 -0700 (MST)
  • RE: foreigners... gotta love them Thu, 13 Nov 2003 14:54:14 -0700 (MST)
  • RE: E/O Insurance Fri, 21 Nov 2003 04:58:55 -0700 (MST)
  • Happy Thanksgiving, SEAINT Wed, 26 Nov 2003 07:33:51 -0700 (MST)
  • RE: Engineering Education Tue, 2 Dec 2003 09:46:23 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Wed, 3 Dec 2003 04:35:49 -0700 (MST)
  • RE: Schooling (was Connections) Fri, 5 Dec 2003 13:25:43 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 03:56:12 -0700 (MST)
  • Q: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 10:10:25 -0700 (MST)
  • CONCRETE: Parallel Cracks in Beam Soffit/Web Wed, 17 Dec 2003 12:46:14 -0700 (MST)
  • Re: Civil engineering 900 years ago Wed, 17 Dec 2003 12:47:41 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential - Scott Tue, 23 Dec 2003 05:41:28 -0700 (MST)
  • Re: Info on Bam Quake, and how to help Sun, 28 Dec 2003 19:34:35 -0700 (MST)
  • Re: Info on Bam Quake, and how to help Mon, 29 Dec 2003 09:46:58 -0700 (MST)
  • Philosophical Differences (WAS: Info on Bam Quake, and how to help) Mon, 29 Dec 2003 11:36:45 -0700 (MST)
  • Re: Health care Mon, 29 Dec 2003 11:42:07 -0700 (MST)
  • Re: Philosophical Differences Mon, 29 Dec 2003 12:27:22 -0700 (MST)
  • Re: Philosophical Differences Mon, 29 Dec 2003 13:34:09 -0700 (MST)
  • Re: Philosophical Differences Mon, 29 Dec 2003 13:59:07 -0700 (MST)
  • Re: Misc Opinions Mon, 29 Dec 2003 19:16:21 -0700 (MST)
  • Re: Philosophical Differences Tue, 30 Dec 2003 08:25:45 -0700 (MST)
  • Re: Misc Opinions Tue, 30 Dec 2003 08:27:49 -0700 (MST)
  • Re: NYTimes.com Article: Halliburton Contracts in Iraq: The Struggle to Manage Costs Tue, 30 Dec 2003 08:38:26 -0700 (MST)
  • Re: Misc Opinions Wed, 31 Dec 2003 13:05:19 -0700 (MST)

• Bill Swanson
  • Fillet Weld Reinforcement of Flare Bevel Groove Welds (Specifically HSS Connections) Thu, 18 Dec 2003 13:47:18 -0700 (MST)
  • RE: RE: Fillet Weld Reinforcement of Flare Bevel Groove Welds (Specifically HSS Connections) Thu, 18 Dec 2003 18:01:20 -0700 (MST)

• Bob Shaw
  • RE: Fillet Weld Reinforcement of Flare Bevel Groove Welds (Specifically HSS Connections) Thu, 18 Dec 2003 16:27:57 -0700 (MST)
  • RE: RE: Fillet Weld Reinforcement of Flare Bevel Groove Welds (Specifically HSS Connections) Fri, 19 Dec 2003 09:34:55 -0700 (MST)

• Brent Koch
  • RE: pool wall design Fri, 14 Nov 2003 13:03:54 -0700 (MST)
  • RE: Uplift on Belled Drilled Pier Fri, 14 Nov 2003 20:40:16 -0700 (MST)
  • RE: AASHTO Pedestrian Bridge Railing Requirements Tue, 25 Nov 2003 11:29:04 -0700 (MST)

• Brian K. Smith
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 10:57:17 -0600 (MDT)
  • Fibermesh Topping Slab Thu, 2 Oct 2003 10:58:44 -0600 (MDT)
  • RE: Rebar breaking Tue, 7 Oct 2003 11:14:13 -0600 (MDT)
  • RE: INFO REQ: Source for Scrap or Surplus Sheet Pile Tue, 28 Oct 2003 07:27:20 -0700 (MST)
  • RE: Shear tranfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 15:52:31 -0700 (MST)
  • RE: Shear tranfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 16:42:17 -0700 (MST)
  • RE: Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 08:52:13 -0700 (MST)
  • RE: Lateral Deflection of Masonry Wall Building Mon, 1 Dec 2003 09:03:53 -0700 (MST)
  • RE: Designing Masonry to Span Horizontally Tue, 9 Dec 2003 09:50:29 -0700 (MST)
  • Louisiana Engineers Wed, 31 Dec 2003 12:08:07 -0700 (MST)
  • RE: Louisiana Engineers Wed, 31 Dec 2003 12:25:33 -0700 (MST)

• Brian M. Spencer
  • RE: SE Tests Tue, 4 Nov 2003 10:09:17 -0700 (MST)
  • RE: Regional permitting differences - calculations Thu, 6 Nov 2003 11:09:11 -0700 (MST)
  • RE: Regional permitting differences - calculations Thu, 6 Nov 2003 11:43:02 -0700 (MST)

• brian stanley
  • concrete tanks Tue, 4 Nov 2003 06:14:37 -0700 (MST)
  • RE: DC PE needed (drawings review) Thu, 11 Dec 2003 07:16:41 -0700 (MST)

• brkoch
  • RE: Uplift on Belled Drilled Pier Thu, 13 Nov 2003 10:23:15 -0700 (MST)

• Bruce Holcomb
  • Deflection limits for skylight support framing. Wed, 8 Oct 2003 10:58:23 -0600 (MDT)
  • RE: Posting Live Load Thu, 9 Oct 2003 11:26:58 -0600 (MDT)
  • FW: Deflection limits for skylight support framing. Fri, 17 Oct 2003 11:53:59 -0600 (MDT)
  • Joist manufacturer Mon, 20 Oct 2003 10:13:19 -0600 (MDT)
  • RE: stone Veneer support Tue, 16 Dec 2003 07:14:47 -0700 (MST)

• Caldwell, Stan
  • RE: Water Proof Membrane Fri, 10 Oct 2003 14:24:19 -0600 (MDT)
  • RE: Rebar Strengths Wed, 22 Oct 2003 15:08:28 -0600 (MDT)
  • RE: Sick Profession? Wed, 5 Nov 2003 11:08:19 -0700 (MST)
  • Sick Profession? Thu, 6 Nov 2003 10:22:24 -0700 (MST)
  • RE: Sick Profession? Thu, 6 Nov 2003 11:03:29 -0700 (MST)
  • RE: Outsourcing - Part I (was Sick Profession) a response to Stan Caldwell Mon, 10 Nov 2003 15:57:22 -0700 (MST)
  • McStructural? Wed, 12 Nov 2003 11:30:17 -0700 (MST)
  • RE: McStructural? [Not Political] Thu, 13 Nov 2003 10:00:35 -0700 (MST)
  • RE: pool wall design Fri, 14 Nov 2003 09:45:29 -0700 (MST)
  • Mondo Quake in Pacific Northwest? Wed, 26 Nov 2003 08:45:23 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 09:03:17 -0700 (MST)
  • RE: Happy Thanksgiving, to ALL Wed, 26 Nov 2003 09:20:50 -0700 (MST)
  • RE: Acceptable Level of Overstress Thu, 4 Dec 2003 14:04:17 -0700 (MST)
  • RE: Acceptable Level of Overstress Thu, 4 Dec 2003 14:50:20 -0700 (MST)
  • RE: Keeping the American Spirit Alive Thu, 11 Dec 2003 14:41:20 -0700 (MST)
  • Public Relations Thu, 11 Dec 2003 15:12:14 -0700 (MST)
  • RE: Public Relations Fri, 12 Dec 2003 09:46:31 -0700 (MST)
  • RE: oh canada! Fri, 12 Dec 2003 14:44:33 -0700 (MST)
  • RE: Public Relations Fri, 12 Dec 2003 15:20:06 -0700 (MST)
  • RE: Making a difference ?? Fri, 12 Dec 2003 15:29:48 -0700 (MST)
  • RE: virus alert Wed, 17 Dec 2003 10:07:21 -0700 (MST)
  • RE: virus alert Wed, 17 Dec 2003 11:04:17 -0700 (MST)
  • Holiday Differences [humor] Mon, 22 Dec 2003 10:00:07 -0700 (MST)
  • Secular Holiday Humor [Way Off Topic] Mon, 22 Dec 2003 16:00:44 -0700 (MST)

• CanitzCF
  • Offset Moment Connection Sun, 5 Oct 2003 22:22:24 -0600 (MDT)
  • Re: Offset Moment Connection Mon, 6 Oct 2003 06:48:13 -0600 (MDT)
  • W Shape question Wed, 15 Oct 2003 19:27:37 -0600 (MDT)
  • Re: W Shape question Thu, 16 Oct 2003 07:02:26 -0600 (MDT)
  • Re: W Shape question Thu, 16 Oct 2003 10:58:04 -0600 (MDT)
  • Mono Stringer Stairs Fri, 7 Nov 2003 22:17:01 -0700 (MST)
  • ATS-109 Thu, 20 Nov 2003 19:26:59 -0700 (MST)

• Carlos Avila
  • CFRP and Concrete Fri, 21 Nov 2003 06:48:34 -0700 (MST)

• Carter, Charlie
  • RE: Allowable thickness variance for steel plates per AISC Wed, 22 Oct 2003 06:23:16 -0600 (MDT)
  • RE: blast and progressive collapse Mon, 27 Oct 2003 10:34:47 -0700 (MST)
  • RE: SE Tests Tue, 4 Nov 2003 10:49:20 -0700 (MST)
  • AISC contest Wed, 5 Nov 2003 10:58:39 -0700 (MST)
  • RE: Mono Stringer Stairs Sat, 8 Nov 2003 05:37:38 -0700 (MST)
  • RE: ASTM A 36 steel Wed, 12 Nov 2003 11:39:18 -0700 (MST)
  • RE: X-braces Wed, 19 Nov 2003 11:49:24 -0700 (MST)
  • RE: Connections Wed, 26 Nov 2003 12:29:52 -0700 (MST)
  • RE: FEMA 350 Tue, 2 Dec 2003 13:23:06 -0700 (MST)
  • RE: Unbraced Length Wed, 10 Dec 2003 13:54:58 -0700 (MST)
  • RE: Question on ASCE 7-02 Load Combinations Mon, 29 Dec 2003 14:41:14 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 23:02:10 -0700 (MST)

• Chad Druffel
  • RE: 1.7 allowable increase gone? 2003 IBC Tue, 7 Oct 2003 19:21:14 -0600 (MDT)

• Chad Van Kampen
  • RE: Hanger reinforcement Tue, 4 Nov 2003 07:46:28 -0700 (MST)

• Chan, David
  • Bolt question Mon, 27 Oct 2003 17:33:27 -0700 (MST)
  • RE: Seismic design of walls Wed, 3 Dec 2003 17:29:45 -0700 (MST)

• Charley Hamilton
  • Re: Posting Live Load Wed, 8 Oct 2003 15:55:31 -0600 (MDT)
  • Re: Plan Check (was Re: Rigid Wood Diaphragm?) Wed, 15 Oct 2003 18:18:59 -0600 (MDT)
  • Re: Plan Check (was Re: Rigid Wood Diaphragm?) Wed, 15 Oct 2003 20:25:31 -0600 (MDT)
  • Re: Concrete Text Books Tue, 21 Oct 2003 21:25:35 -0600 (MDT)
  • Re: Reusing Foundations (was: SE Tests) Tue, 4 Nov 2003 09:41:52 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Sun, 16 Nov 2003 00:26:23 -0700 (MST)
  • Re: Shear wall Beam Design Tue, 25 Nov 2003 10:15:50 -0700 (MST)
  • Re: Perforated shearwall design Tue, 2 Dec 2003 14:52:40 -0700 (MST)
  • Re: Perforated shearwall design Tue, 2 Dec 2003 22:06:32 -0700 (MST)
  • Re: Perforated shearwall design Wed, 3 Dec 2003 00:07:07 -0700 (MST)
  • Re: Seismic design of walls Wed, 3 Dec 2003 15:25:53 -0700 (MST)
  • Re: Schooling (was Connections) Sat, 6 Dec 2003 17:53:08 -0700 (MST)
  • Re: Schooling (was Connections) Sat, 6 Dec 2003 18:00:19 -0700 (MST)
  • Re: National Seismic Hazard Mapping Project Mon, 8 Dec 2003 09:30:25 -0700 (MST)
  • Re: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 11:47:01 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 11:39:14 -0700 (MST)
  • Re: Spam generation by list Thu, 18 Dec 2003 10:47:24 -0700 (MST)
  • Re: Earthquake ground movement question Wed, 31 Dec 2003 20:22:48 -0700 (MST)

• Chris Banbury
  • RE: Residential Truss Bracing Wed, 10 Dec 2003 06:25:00 -0700 (MST)
  • Component & Cladding for Open Structures Tue, 16 Dec 2003 09:13:14 -0700 (MST)

• Chris Roper
  • Re: CA SE / SE2 Thu, 6 Nov 2003 10:35:35 -0700 (MST)
  • Re: CA PE with regards to WA PE Mon, 10 Nov 2003 07:22:00 -0700 (MST)
  • Re: out of plane anchorage Question Wed, 12 Nov 2003 08:20:41 -0700 (MST)
  • Re: Near-Source Factor for non-structural components Fri, 14 Nov 2003 15:05:56 -0700 (MST)
  • Re: Near-Source Factor for non-structural components Fri, 14 Nov 2003 15:18:44 -0700 (MST)
  • Re: SE Review Manual - Wanted Tue, 18 Nov 2003 07:39:17 -0700 (MST)

• Christopher Conrad
  • Interstory Drift and the Wind Directionality Factor Fri, 7 Nov 2003 08:43:21 -0700 (MST)
  • Interstory drift and the wind directionality factor Mon, 1 Dec 2003 07:25:03 -0700 (MST)

• Christopher S. Campbell
  • one small request regarding bandwidth of digest Wed, 1 Oct 2003 09:06:03 -0600 (MDT)
  • Masonry Structural Notes and Specifications Mon, 22 Dec 2003 15:13:41 -0700 (MST)

• Christopher Wright
  • RE: Keeping the American Spirit Alive Thu, 11 Dec 2003 16:32:07 -0700 (MST)
  • RE: Keeping the American Spirit Alive Sat, 13 Dec 2003 10:08:07 -0700 (MST)
  • Re: Finite Element Modeling Tue, 16 Dec 2003 08:44:32 -0700 (MST)
  • RE: Finite Element Modeling Tue, 16 Dec 2003 08:48:12 -0700 (MST)
  • RE: oh canada! Wed, 17 Dec 2003 08:32:53 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Thu, 18 Dec 2003 20:55:30 -0700 (MST)
  • Re: Outsourcing - light commercial and h Fri, 19 Dec 2003 10:30:04 -0700 (MST)
  • Re: Fw: [offtopic] Article I through IX Fri, 19 Dec 2003 10:44:18 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Sun, 21 Dec 2003 13:35:12 -0700 (MST)
  • Re: Holiday Differences [humor] Mon, 22 Dec 2003 10:21:58 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Mon, 22 Dec 2003 19:51:01 -0700 (MST)
  • Re: Fee for Custom Residence Wed, 24 Dec 2003 08:28:33 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Wed, 24 Dec 2003 14:34:48 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - S Fri, 26 Dec 2003 11:57:36 -0700 (MST)
  • Re: America for Americans - A recent graduates perspective on t Fri, 26 Dec 2003 12:19:01 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - S Fri, 26 Dec 2003 12:21:26 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - S Fri, 26 Dec 2003 12:26:27 -0700 (MST)
  • Re: Social security (was: Outsourcing...) Sun, 28 Dec 2003 14:45:39 -0700 (MST)
  • Re: Health care Mon, 29 Dec 2003 10:56:45 -0700 (MST)
  • Re: Health care Mon, 29 Dec 2003 12:17:32 -0700 (MST)
  • Re: Misc Opinions Tue, 30 Dec 2003 09:18:42 -0700 (MST)
  • Re: Old ASTMS Tue, 30 Dec 2003 20:34:56 -0700 (MST)
  • Re: Philosophical Differences Wed, 31 Dec 2003 09:15:41 -0700 (MST)
  • Re: Misc Opinions Wed, 31 Dec 2003 17:26:30 -0700 (MST)
  • Re: Earthquake ground movement question Wed, 31 Dec 2003 22:36:14 -0700 (MST)

• chuckuc
  • Re: Special Inspection Fri, 31 Oct 2003 12:33:37 -0700 (MST)
  • Re: Staples for Shear-resisting Panels [was: Nail embedments] Sun, 2 Nov 2003 22:41:29 -0700 (MST)
  • Re: SICK PROFESSION Tue, 11 Nov 2003 10:06:16 -0700 (MST)
  • Re: foreigners... gotta love them Wed, 12 Nov 2003 18:45:33 -0700 (MST)
  • Re: foreigners... gotta love them Wed, 12 Nov 2003 19:06:44 -0700 (MST)
  • Re: Perforated shearwall design Tue, 2 Dec 2003 23:38:35 -0700 (MST)
  • Re: Perforated shearwall design Wed, 3 Dec 2003 00:05:12 -0700 (MST)
  • Re: Perforated shear wall design Wed, 3 Dec 2003 00:37:54 -0700 (MST)
  • Re: Perforated shear wall design Wed, 3 Dec 2003 14:07:31 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 11:19:56 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 15:31:13 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 17:50:11 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) Fri, 12 Dec 2003 19:38:23 -0700 (MST)
  • Re: Keeping the American Spirit Alive Sat, 13 Dec 2003 11:16:45 -0700 (MST)
  • Re: Tell me what's really on your mind Mon, 15 Dec 2003 11:10:27 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) STAGGERING Wed, 17 Dec 2003 20:59:10 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) STA Fri, 19 Dec 2003 09:55:18 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential - S Sun, 28 Dec 2003 12:00:10 -0700 (MST)

• Clifford Schwinger
  • Re: Offset Moment Connection Mon, 6 Oct 2003 07:03:32 -0600 (MDT)
  • question on K factors and P-delta analysis Tue, 7 Oct 2003 07:15:03 -0600 (MDT)
  • RE: question on K factors and P-delta analysis Tue, 7 Oct 2003 11:32:47 -0600 (MDT)
  • Re: Foundation Torsion Wed, 8 Oct 2003 18:41:13 -0600 (MDT)
  • RE: Hyatt Regency Collapse (was:E: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 13:22:57 -0600 (MDT)
  • Two-way flat plate moment frame question Tue, 21 Oct 2003 20:58:31 -0600 (MDT)
  • microwave test for measuring water content in fresh concrete Fri, 24 Oct 2003 07:41:25 -0600 (MDT)
  • Flat plate punching shear question Wed, 29 Oct 2003 09:57:56 -0700 (MST)
  • Re: Off Topic? NYC Subway Tue, 11 Nov 2003 14:34:06 -0700 (MST)
  • structural steel bolted connection question Mon, 17 Nov 2003 07:55:32 -0700 (MST)
  • Re: Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 15:15:51 -0700 (MST)
  • ACI 318-02 structural integrity question Mon, 24 Nov 2003 09:46:35 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 12:53:22 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 14:53:24 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 20:42:21 -0700 (MST)
  • Re: Was connections .. Tue, 2 Dec 2003 16:43:26 -0700 (MST)
  • Re: Engineering Education Tue, 2 Dec 2003 16:52:31 -0700 (MST)
  • RE: Schooling (was Connections) Wed, 3 Dec 2003 06:47:26 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:38:41 -0700 (MST)
  • Re: Schooling (was Connections) Fri, 5 Dec 2003 11:58:33 -0700 (MST)
  • Re: ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 12:01:10 -0700 (MST)
  • Re: S.E. Position Tue, 16 Dec 2003 15:03:12 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Sun, 21 Dec 2003 19:01:28 -0700 (MST)
  • Re: Misc Opinions Tue, 30 Dec 2003 20:03:14 -0700 (MST)
  • Earthquake ground movement question Wed, 31 Dec 2003 14:35:47 -0700 (MST)

• Craig Leech
  • RE: Two-way flat plate moment frame question Wed, 22 Oct 2003 13:24:03 -0600 (MDT)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:36:21 -0700 (MST)

• Cratylus Consulting Group
  • Re: cost of field drilling holes Mon, 17 Nov 2003 21:47:12 -0700 (MST)
  • Re: cost of field drilling holes Tue, 18 Nov 2003 18:16:41 -0700 (MST)
  • Re: cost of field drilling holes Wed, 19 Nov 2003 14:57:45 -0700 (MST)
  • Re: No more A35F Wed, 19 Nov 2003 23:01:23 -0700 (MST)
  • Re: Spain Code/ NCSE-94 Tue, 25 Nov 2003 01:13:37 -0700 (MST)
  • Re: Harlen Metal Products Product info Tue, 25 Nov 2003 01:17:11 -0700 (MST)
  • Re: URM Building per UCBC Tue, 25 Nov 2003 19:39:06 -0700 (MST)
  • Re: brick walls Tue, 23 Dec 2003 12:46:25 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 15:36:27 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 17:46:42 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 21:06:26 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 21:12:43 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 22:04:49 -0700 (MST)
  • Re: Paso Robles Earthquake Thu, 25 Dec 2003 00:44:57 -0700 (MST)
  • Re: Fee for Custom Residence Mon, 29 Dec 2003 19:28:37 -0700 (MST)
  • Re: Old ASTMS Tue, 30 Dec 2003 18:44:47 -0700 (MST)

• D. Woodham
  • Re: microwave test for measuring water content in fresh concrete Fri, 24 Oct 2003 08:41:23 -0600 (MDT)
  • Re: Reusing Foundations Tue, 4 Nov 2003 08:50:10 -0700 (MST)

• da
  • CA SE Thu, 30 Oct 2003 20:33:05 -0700 (MST)
  • Re: Uplift on Belled Drilled Pier Thu, 13 Nov 2003 11:21:39 -0700 (MST)
  • simpson Fri, 14 Nov 2003 09:47:46 -0700 (MST)
  • plywood shear wall deflection Tue, 18 Nov 2003 10:02:46 -0700 (MST)
  • consistency Mon, 22 Dec 2003 18:13:33 -0700 (MST)

• Dan Boltz
  • Unbraced Length for Stair Stringers? Fri, 7 Nov 2003 06:39:51 -0700 (MST)
  • Relative Rigity Calculations? Fri, 7 Nov 2003 07:28:08 -0700 (MST)
  • Shear tranfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 15:29:36 -0700 (MST)
  • Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 08:09:03 -0700 (MST)

• Dan Hernandez
  • RE: FEMA 350 Tue, 2 Dec 2003 13:35:18 -0700 (MST)
  • Fema 350 Tue, 2 Dec 2003 13:45:08 -0700 (MST)

• Dan Morrow
  • FEMA Tier3 Analysis - Seismic Factor Mon, 17 Nov 2003 14:43:03 -0700 (MST)
  • 2003 IBC load combnations & wood design Wed, 19 Nov 2003 10:43:51 -0700 (MST)
  • stone Veneer support Mon, 15 Dec 2003 14:22:01 -0700 (MST)
  • masonry cleanouts Tue, 23 Dec 2003 14:29:32 -0700 (MST)

• Daryl Richardson
  • Off Topic - Thank you. Sat, 1 Nov 2003 12:25:11 -0700 (MST)
  • Re: Off Topic - Thank You Sun, 2 Nov 2003 12:27:46 -0700 (MST)
  • Re: pool wall design Thu, 13 Nov 2003 11:51:52 -0700 (MST)
  • Re: Schooling (was Connections) Wed, 3 Dec 2003 20:06:22 -0700 (MST)
  • Theatre Roof Fri, 12 Dec 2003 10:01:22 -0700 (MST)
  • Re: Theatre Roof Tue, 16 Dec 2003 10:37:34 -0700 (MST)
  • Re: Spam generation by list Wed, 17 Dec 2003 18:04:03 -0700 (MST)
  • Re: CONCRETE: Parallel Cracks in Beam Soffit/Web Wed, 17 Dec 2003 18:19:13 -0700 (MST)
  • Merry Christmas: and Thank you Wed, 24 Dec 2003 10:11:10 -0700 (MST)

• Dave Adams
  • Alternate BWP's (Thor & Dennis) Mon, 27 Oct 2003 11:39:49 -0700 (MST)
  • RE: Thickened footings under interior braced walls (Was: RE Hardy Frames) Tue, 28 Oct 2003 13:43:33 -0700 (MST)
  • RE: Tell me what's really on your mind Mon, 15 Dec 2003 10:01:45 -0700 (MST)

• Dave Langhone
  • Re: Need help with Structural software Sat, 11 Oct 2003 14:26:11 -0600 (MDT)

• David Evans
  • soil-pile-structure interaction Fri, 31 Oct 2003 15:33:38 -0700 (MST)

• David Guerrero
  • RE: Seismic Load Factors Mon, 20 Oct 2003 16:40:28 -0600 (MDT)

• David L. Fisher
  • RE: Off topic Wed, 1 Oct 2003 10:34:14 -0600 (MDT)
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Mon, 13 Oct 2003 10:06:31 -0600 (MDT)
  • RE: Sick Profession? Thu, 6 Nov 2003 10:28:07 -0700 (MST)
  • RE: Regional permitting differences - calculations Thu, 6 Nov 2003 11:23:32 -0700 (MST)
  • RE: SE Tests Thu, 6 Nov 2003 12:06:35 -0700 (MST)
  • RE: Peer Reviews & Value Engineering Reviews Thu, 6 Nov 2003 13:19:40 -0700 (MST)
  • RE: Seals and signatures Thu, 6 Nov 2003 15:07:51 -0700 (MST)
  • RE: SE Test Fri, 7 Nov 2003 14:08:48 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 09:34:21 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 10:41:28 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 14:05:10 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 10:30:12 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 10:42:35 -0700 (MST)
  • RE: ASTM A 36 steel Wed, 12 Nov 2003 10:46:44 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 11:15:25 -0700 (MST)
  • RE: McStructural? Wed, 12 Nov 2003 11:47:13 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 12:22:08 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 12:25:42 -0700 (MST)
  • RE: FW: foreigners... gotta love them Wed, 12 Nov 2003 12:44:14 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 12:57:06 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 13:29:40 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 15:41:12 -0700 (MST)
  • RE: Shear tranfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 16:09:39 -0700 (MST)
  • SE job opportunities - Chicago Tue, 25 Nov 2003 15:51:42 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 06:39:25 -0700 (MST)
  • RE: Happy Thanksgiving, to ALL Wed, 26 Nov 2003 08:09:57 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 09:14:12 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 09:18:33 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 13:36:47 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 13:41:50 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 11:26:22 -0700 (MST)
  • RE: Engineering Education Tue, 2 Dec 2003 09:05:30 -0700 (MST)
  • RE: Engineering Education Tue, 2 Dec 2003 10:13:55 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 08:34:42 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 10:55:14 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 12:13:37 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Thu, 4 Dec 2003 12:16:05 -0700 (MST)
  • RE: Schooling - Comment to Scott Maxwell's reply Sat, 6 Dec 2003 12:01:30 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 13:51:39 -0700 (MST)
  • RE: Finite Element Modeling Tue, 16 Dec 2003 08:55:01 -0700 (MST)
  • RE: SEII results - anyone Tue, 16 Dec 2003 12:57:42 -0700 (MST)
  • RE: SEII results - anyone Tue, 16 Dec 2003 15:37:41 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 10:50:03 -0700 (MST)
  • RE: Holiday Differences [humor] Mon, 22 Dec 2003 10:07:59 -0700 (MST)
  • RE: Holiday Differences [humor] Mon, 22 Dec 2003 15:01:55 -0700 (MST)
  • RE: consistency Tue, 23 Dec 2003 08:28:42 -0700 (MST)
  • RE: brick walls Tue, 23 Dec 2003 11:51:54 -0700 (MST)
  • RE: Secular Holiday Humor [Way Off Topic] Tue, 23 Dec 2003 15:40:23 -0700 (MST)
  • RE: Fee for Custom Residence Wed, 24 Dec 2003 07:54:03 -0700 (MST)
  • RE: Fee for Custom Residence Wed, 24 Dec 2003 08:37:24 -0700 (MST)
  • RE: America for Americans - A recent graduates perspective on the implications of outsourcing Fri, 26 Dec 2003 10:53:35 -0700 (MST)
  • RE: Philosophical Differences Mon, 29 Dec 2003 13:20:44 -0700 (MST)
  • RE: Misc Opinions Mon, 29 Dec 2003 15:01:34 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 07:24:08 -0700 (MST)
  • RE: NYTimes.com Article: Halliburton Contracts in Iraq: The Struggle to Manage Costs Tue, 30 Dec 2003 08:43:30 -0700 (MST)
  • RE: NYTimes.com Article: Halliburton Contracts in Iraq: The Struggle to Manage Costs Tue, 30 Dec 2003 08:52:52 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 16:11:53 -0700 (MST)

• David Merrick
  • RE: Rigid Wood Diaphragm? Fri, 10 Oct 2003 10:24:58 -0600 (MDT)
  • RE: Q: Flatness Tolerances for Residential Slab Wed, 22 Oct 2003 11:47:07 -0600 (MDT)
  • Pre-Fab wall of Conc. Block Fri, 31 Oct 2003 09:45:45 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) Fri, 12 Dec 2003 15:02:30 -0700 (MST)
  • Shear Walls and 3x Framing (UBC) STAGGERING Tue, 16 Dec 2003 11:27:13 -0700 (MST)
  • Re: Failed Outsourcing Sun, 21 Dec 2003 18:48:19 -0700 (MST)

• David Pomerleau
  • Re: Glulam Roof Girders in a Tilt-Up Thu, 30 Oct 2003 08:45:09 -0700 (MST)

• Davis Parsons
  • Re: Posting Live Load Wed, 8 Oct 2003 14:20:39 -0600 (MDT)
  • Re: Posting Live Load Wed, 8 Oct 2003 15:37:51 -0600 (MDT)
  • Re: Joist manufacturer Mon, 20 Oct 2003 10:47:06 -0600 (MDT)
  • Re: Steel Joist Designation - 1950's...Not in SJI Manual Fri, 7 Nov 2003 09:31:49 -0700 (MST)
  • Re: Bolt edge distance-steel Wed, 19 Nov 2003 13:51:05 -0700 (MST)

• Dean Briggs
  • RE: Butt-welding a gap Fri, 3 Oct 2003 13:17:13 -0600 (MDT)

• Dennis S. Wish
  • RE: Spam generation by list Wed, 17 Dec 2003 19:02:11 -0700 (MST)
  • RE: Outsourcing Mon, 22 Dec 2003 08:07:19 -0700 (MST)
  • RE: Fee for Custom Residence Wed, 24 Dec 2003 12:28:25 -0700 (MST)
  • RE: Structural observation Wed, 24 Dec 2003 12:43:17 -0700 (MST)
  • Re: Paso Robles Earthquake Thu, 25 Dec 2003 06:51:06 -0700 (MST)

• Dennis Wish
  • Torsion in wood beam Thu, 2 Oct 2003 18:30:50 -0600 (MDT)
  • RE: Proposed roof design Thu, 2 Oct 2003 20:44:40 -0600 (MDT)
  • RE: Wood Beam Torsion Wed, 8 Oct 2003 12:27:06 -0600 (MDT)
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 19:27:34 -0600 (MDT)
  • RE: Plan Check vs Peer Review Thu, 16 Oct 2003 19:54:51 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Thu, 16 Oct 2003 20:14:42 -0600 (MDT)
  • RE: Flatness Tolerances for Residential Slab Fri, 17 Oct 2003 12:34:33 -0600 (MDT)
  • Pasco Membrane was: Flatness Tolerances for Residential Slab Fri, 17 Oct 2003 13:09:22 -0600 (MDT)
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Fri, 17 Oct 2003 13:34:57 -0600 (MDT)
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Sun, 19 Oct 2003 18:49:00 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Tue, 21 Oct 2003 13:40:02 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Tue, 21 Oct 2003 14:24:36 -0600 (MDT)
  • RE: Plan Check Wed, 22 Oct 2003 11:48:52 -0600 (MDT)
  • RE: Hardy Frames Thu, 23 Oct 2003 11:04:49 -0600 (MDT)
  • RE: Hardy Frames Fri, 24 Oct 2003 00:41:31 -0600 (MDT)
  • RE: Thickened footings under interior braced walls (Was: RE Hardy Frames) Sat, 25 Oct 2003 14:25:41 -0600 (MDT)
  • RE: Thickened footings under interior braced walls (Was: RE Hardy Frames) Mon, 27 Oct 2003 10:55:24 -0700 (MST)
  • RE: Thickened footings under interior braced walls (Was: RE Hardy Frames) Mon, 27 Oct 2003 14:08:09 -0700 (MST)
  • RE: Thickened footings under interior braced walls (Was: RE Hardy Frames) Mon, 27 Oct 2003 15:46:42 -0700 (MST)
  • RE: New home problems Fri, 31 Oct 2003 13:54:30 -0700 (MST)
  • RE: New home problems Sat, 1 Nov 2003 20:44:16 -0700 (MST)
  • SEAINT Website Mon, 3 Nov 2003 23:37:17 -0700 (MST)
  • RE: SE Tests Thu, 6 Nov 2003 10:45:36 -0700 (MST)
  • RE: SE Test Sat, 8 Nov 2003 00:48:16 -0700 (MST)
  • RE: SE Test Sat, 8 Nov 2003 17:16:32 -0700 (MST)
  • RE: SE Test Sat, 8 Nov 2003 18:04:21 -0700 (MST)
  • RE: SICK PROFESSION Sat, 8 Nov 2003 18:31:17 -0700 (MST)
  • RE: SICK PROFESSION Sun, 9 Nov 2003 01:55:38 -0700 (MST)
  • Outsourcing - Part I (was Sick Profession) a response to Stan Caldwell Sun, 9 Nov 2003 04:09:37 -0700 (MST)
  • RE: SICK PROFESSION Sun, 9 Nov 2003 22:13:45 -0700 (MST)
  • RE: Outsourcing - Part I (was Sick Profession) a response to Stan Caldwell Mon, 10 Nov 2003 14:36:27 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 15:08:30 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 15:25:23 -0700 (MST)
  • H-1B Abuse was: Sick Profession Mon, 10 Nov 2003 15:46:26 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 19:28:39 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 19:36:35 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 20:08:36 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 20:17:06 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 20:52:57 -0700 (MST)
  • RE: H1-B -Abusers Mon, 10 Nov 2003 21:00:30 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 23:57:19 -0700 (MST)
  • RE: SEA (was Sick Profession Tue, 11 Nov 2003 00:24:30 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 01:20:33 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 01:30:53 -0700 (MST)
  • RE: GOOD PROFESSION Tue, 11 Nov 2003 13:39:22 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 13:43:22 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 15:19:52 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 15:30:07 -0700 (MST)
  • Exporting America (Use or abUSE) Wed, 12 Nov 2003 15:54:59 -0700 (MST)
  • Jobs vs. political parties Wed, 12 Nov 2003 16:49:21 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 16:59:40 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 21:16:50 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 22:19:27 -0700 (MST)
  • RE: Paul Fratessa: when did he die ???? Wed, 12 Nov 2003 22:27:11 -0700 (MST)
  • RE: Paul Fratessa: when did he die ???? Wed, 12 Nov 2003 23:04:32 -0700 (MST)
  • RE: shear diaphragms and trusses Fri, 14 Nov 2003 15:01:52 -0700 (MST)
  • Should we only be concerned with the Structural Engineering Profession? Fri, 14 Nov 2003 15:19:26 -0700 (MST)
  • CMU Column Ties (horizontal) Sat, 15 Nov 2003 22:19:28 -0700 (MST)
  • RE: CMU Column Ties (horizontal) Sun, 16 Nov 2003 14:16:02 -0700 (MST)
  • RE: CMU Column Ties (horizontal) Sun, 16 Nov 2003 14:21:45 -0700 (MST)
  • RE: CMU Column Ties (horizontal) Sun, 16 Nov 2003 14:24:33 -0700 (MST)
  • Gunnite Pool Methodology Sun, 16 Nov 2003 14:39:48 -0700 (MST)
  • RE: CMU Column Ties (horizontal) Mon, 17 Nov 2003 12:20:25 -0700 (MST)
  • RE: Title of "Engineer" - California's Facilities Engineers Mon, 17 Nov 2003 19:46:42 -0700 (MST)
  • RE: Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 19:57:35 -0700 (MST)
  • Flag-Pole Foundations for light framing Wed, 19 Nov 2003 14:03:59 -0700 (MST)
  • RE: Flag-Pole Foundations for light framing Wed, 19 Nov 2003 19:22:16 -0700 (MST)
  • No more A35F Wed, 19 Nov 2003 19:26:53 -0700 (MST)
  • 1930's Poured in Place Concrete Building Wed, 19 Nov 2003 23:53:11 -0700 (MST)
  • RE: 1930's Poured in Place Concrete Building Thu, 20 Nov 2003 14:26:34 -0700 (MST)
  • RE: No more A35F Thu, 20 Nov 2003 14:28:52 -0700 (MST)
  • RE: 1930's Poured in Place Concrete Building Thu, 20 Nov 2003 14:37:17 -0700 (MST)
  • RE: 1930's Poured in Place Concrete Building Thu, 20 Nov 2003 14:44:34 -0700 (MST)
  • RE: Flag-Pole Foundations for light framing Thu, 20 Nov 2003 14:45:21 -0700 (MST)
  • RE: 1930's Poured in Place Concrete Building - Scott's Comments Thu, 20 Nov 2003 15:17:09 -0700 (MST)
  • RE: E/O Insurance Fri, 21 Nov 2003 18:19:44 -0700 (MST)
  • RE: E/O Insurance Fri, 21 Nov 2003 20:55:12 -0700 (MST)
  • Quality of Construction in Wood (Was: No more A35F )- to Steven from Cratylus Fri, 21 Nov 2003 21:02:19 -0700 (MST)
  • Fate of the A35F Mon, 24 Nov 2003 11:52:16 -0700 (MST)
  • RE: SE job opportunities - Chicago Tue, 25 Nov 2003 19:37:02 -0700 (MST)
  • Happy Thanksgiving, to ALL Wed, 26 Nov 2003 07:55:16 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 13:22:30 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 19:06:46 -0700 (MST)
  • GSREB and City of Los Angeles Chapter 96 Sat, 29 Nov 2003 19:07:19 -0700 (MST)
  • RE: Perforated shearwall design Tue, 2 Dec 2003 19:05:51 -0700 (MST)
  • RE: Perforated shear wall design Tue, 2 Dec 2003 19:23:27 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Tue, 2 Dec 2003 20:05:54 -0700 (MST)
  • RE: Schooling (was Connections) Tue, 2 Dec 2003 20:07:01 -0700 (MST)
  • RE: Acceptable Level of Overstress Thu, 4 Dec 2003 23:39:55 -0700 (MST)
  • RE: Schooling - Comment to Scott Maxwell's reply Fri, 5 Dec 2003 15:24:33 -0700 (MST)
  • Paper Space - was: Engineering Education Reply to Bill P. from Gerard Fri, 5 Dec 2003 16:10:07 -0700 (MST)
  • RE: Paper Space - was: Engineering Education Reply to Bill P. from Gerard Sun, 7 Dec 2003 00:03:56 -0700 (MST)
  • RE: Paper Space - was: Engineering Education Reply to Bill P. from Gerard Sun, 7 Dec 2003 00:46:11 -0700 (MST)
  • RE: Paper Space - was: Engineering Education Reply to Bill P. from Gerard Sun, 7 Dec 2003 21:05:01 -0700 (MST)
  • Looking for a Wi-Fi PDA Mon, 8 Dec 2003 00:58:05 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 13:50:30 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Tue, 9 Dec 2003 00:12:01 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Tue, 9 Dec 2003 13:59:45 -0700 (MST)
  • Keeping the American Spirit Alive Was: DC PE needed (drawings review) Thu, 11 Dec 2003 12:58:59 -0700 (MST)
  • RE: Keeping the American Spirit Alive Thu, 11 Dec 2003 13:18:11 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 13:26:13 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 13:40:31 -0700 (MST)
  • RE: Keeping the American Spirit Alive Reply to Jeff Thu, 11 Dec 2003 23:27:23 -0700 (MST)
  • RE: Public Relations Thu, 11 Dec 2003 23:57:31 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Fri, 12 Dec 2003 00:08:22 -0700 (MST)
  • RE: Wood Truss Bracing Fri, 12 Dec 2003 05:08:45 -0700 (MST)
  • RE: Making a difference ?? Fri, 12 Dec 2003 13:36:38 -0700 (MST)
  • RE: Public Relations Fri, 12 Dec 2003 13:47:34 -0700 (MST)
  • RE: Making a difference ?? Fri, 12 Dec 2003 14:57:46 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Fri, 12 Dec 2003 15:46:30 -0700 (MST)
  • AutoCad Arch Desktop 2004 Fri, 12 Dec 2003 18:06:33 -0700 (MST)
  • Tell me what's really on your mind Sat, 13 Dec 2003 17:05:19 -0700 (MST)
  • RE: Tell me what's really on your mind Mon, 15 Dec 2003 14:23:49 -0700 (MST)
  • RE: AutoCad Arch Desktop 2004 Tue, 16 Dec 2003 13:56:25 -0700 (MST)
  • Outsourcing - light commercial and high end residential Thu, 18 Dec 2003 15:48:33 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Thu, 18 Dec 2003 23:37:45 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Thu, 18 Dec 2003 23:42:14 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 21:58:39 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 22:45:37 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 23:38:00 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 23:45:59 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - Scott Sun, 21 Dec 2003 17:15:12 -0700 (MST)
  • Upton Sinclair and the last time California faced Bankruptcy Mon, 22 Dec 2003 21:44:03 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - Scott Tue, 23 Dec 2003 04:13:31 -0700 (MST)
  • Paso Robles Earthquake Wed, 24 Dec 2003 14:09:07 -0700 (MST)
  • RE: brick walls Wed, 24 Dec 2003 15:32:24 -0700 (MST)
  • RE: Paso Robles Earthquake Wed, 24 Dec 2003 22:02:59 -0700 (MST)
  • RE: Paso Robles Earthquake Wed, 24 Dec 2003 22:08:47 -0700 (MST)
  • RE: Paso Robles Earthquake Wed, 24 Dec 2003 22:13:21 -0700 (MST)
  • RE: Paso Robles Earthquake Thu, 25 Dec 2003 20:02:03 -0700 (MST)
  • RE: Fee for Custom Residence Mon, 29 Dec 2003 18:41:23 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 22:32:35 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 22:46:27 -0700 (MST)
  • RE: NYTimes.com Article: Halliburton Contracts in Iraq: The Struggle to Manage Costs Tue, 30 Dec 2003 23:57:16 -0700 (MST)
  • Freespeech(--nospam--at)whatever.com Wed, 31 Dec 2003 00:03:06 -0700 (MST)
  • RE: Louisiana Engineers Wed, 31 Dec 2003 14:25:04 -0700 (MST)
  • RE: Misc Opinions Wed, 31 Dec 2003 14:54:41 -0700 (MST)

• Derek Westphal
  • 2x4 Wood Diaphragm Capacity Mon, 22 Dec 2003 11:16:44 -0700 (MST)

• desi j kiss
  • Re: Hardy Frames Thu, 23 Oct 2003 10:40:33 -0600 (MDT)

• dfisher
  • NYTimes.com Article: Halliburton Contracts in Iraq: The Struggle to Manage Costs Tue, 30 Dec 2003 07:22:35 -0700 (MST)

• dfisher(--nospam--at)fpse.com
  • RE: Job Check lists Thu, 23 Oct 2003 06:40:02 -0600 (MDT)
  • RE: SICK PROFESSION Sat, 8 Nov 2003 17:20:47 -0700 (MST)
  • RE: SICK PROFESSION Sat, 8 Nov 2003 20:01:58 -0700 (MST)
  • RE: Outsourcing - Part I (was Sick Profession) a response to Stan Caldwell Mon, 10 Nov 2003 06:19:50 -0700 (MST)
  • RE: SICK PROFESSION Wed, 12 Nov 2003 06:37:26 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 09:59:13 -0700 (MST)
  • offshore outsourcing Sun, 7 Dec 2003 07:56:19 -0700 (MST)
  • RE: Finite Element Modeling Tue, 16 Dec 2003 06:53:08 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 05:55:29 -0700 (MST)

• Dick_Roberts
  • RE: ACI Detailing Manual SP-66(94) Wed, 17 Dec 2003 06:18:04 -0700 (MST)

• DIPAK ZINZUWAIA
  • Reply of Shear wall Beam Design Tue, 25 Nov 2003 15:27:55 -0700 (MST)
  • RE: Happy Thanksgiving, SEAINT Thu, 27 Nov 2003 21:32:56 -0700 (MST)

• Don
  • RE: Plan Check from a plan reviewer Wed, 22 Oct 2003 10:02:35 -0600 (MDT)

• Don Vickers
  • Blind Fasteners for Structural Applications Wed, 29 Oct 2003 09:47:08 -0700 (MST)
  • Re: Blind Fasteners for Structural Applications Thu, 30 Oct 2003 08:01:52 -0700 (MST)
  • Re: Canandian Concrete Code Question Mon, 10 Nov 2003 14:47:56 -0700 (MST)

• Donald R. Bryant
  • RE: Subject: Offset Moment Connection Mon, 6 Oct 2003 08:03:01 -0600 (MDT)

• Donna Gochenaur
  • RE: AutoCad Arch Desktop 2004 Tue, 16 Dec 2003 07:53:03 -0700 (MST)
  • RE: AutoCad Arch Desktop 2004 Wed, 17 Dec 2003 08:03:27 -0700 (MST)

• Drew Morris
  • Re: Keeping the American Spirit Alive Fri, 12 Dec 2003 11:45:33 -0700 (MST)

• Dwain Hendershot
  • ASCE7/IBC 2000 minimum wind load Mon, 10 Nov 2003 07:17:32 -0700 (MST)
  • IBC 2000 load combinations Tue, 11 Nov 2003 05:32:24 -0700 (MST)
  • RE: IBC 2000 load combinations Tue, 11 Nov 2003 08:38:07 -0700 (MST)
  • RE: IBC 2000 load combinations Tue, 11 Nov 2003 11:07:42 -0700 (MST)

• Eckrote, David
  • RE: Test Wed, 15 Oct 2003 14:19:09 -0600 (MDT)

• Ed . Haninger
  • Re: Need help with Structural software Fri, 10 Oct 2003 09:06:39 -0600 (MDT)
  • Re: CBC 1921.4 Frame Members Design Mon, 3 Nov 2003 13:34:11 -0700 (MST)
  • RE: Unbraced Length Wed, 10 Dec 2003 11:28:42 -0700 (MST)

• Ed Najjarine
  • RE: Philosophical Differences Mon, 29 Dec 2003 12:46:44 -0700 (MST)

• Ed Tornberg
  • Wood continuous beams Thu, 9 Oct 2003 10:44:32 -0600 (MDT)
  • RE: Wood continuous beams Fri, 10 Oct 2003 09:49:31 -0600 (MDT)
  • Residential Roof Diaphragms Wed, 29 Oct 2003 10:43:16 -0700 (MST)
  • RE: steel formdeck as shearwall? Thu, 30 Oct 2003 16:46:17 -0700 (MST)
  • RE: CA SE Fri, 31 Oct 2003 10:08:13 -0700 (MST)
  • RE: SE Tests Tue, 4 Nov 2003 10:02:55 -0700 (MST)
  • RE: SE Tests Tue, 4 Nov 2003 10:27:09 -0700 (MST)
  • RE: Sick Profession? Thu, 6 Nov 2003 10:26:45 -0700 (MST)
  • RE: staples vs. nails Wed, 12 Nov 2003 10:34:53 -0700 (MST)
  • RE: Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 09:43:06 -0700 (MST)
  • 4" CMU walls with out-of-plane loads Fri, 14 Nov 2003 09:54:20 -0700 (MST)
  • Near-Source Factor for non-structural components Fri, 14 Nov 2003 11:59:18 -0700 (MST)
  • RE: Near-Source Factor for non-structural components Fri, 14 Nov 2003 15:58:19 -0700 (MST)
  • RE: Schooling (was Connections) Tue, 2 Dec 2003 10:25:47 -0700 (MST)
  • RE: Perforated shear wall design Wed, 3 Dec 2003 11:13:11 -0700 (MST)
  • RE: Creosote Ban? Thu, 4 Dec 2003 18:21:55 -0700 (MST)
  • Wood shear panels Wed, 10 Dec 2003 13:27:55 -0700 (MST)
  • RE: Wood shear panels Wed, 10 Dec 2003 14:05:00 -0700 (MST)
  • Spam generation by list Wed, 17 Dec 2003 09:14:10 -0700 (MST)
  • RE: sound transmission, treated wood Thu, 18 Dec 2003 14:21:30 -0700 (MST)

• Eduardo Castell
  • Minimum Design Loads Fri, 5 Dec 2003 09:28:05 -0700 (MST)
  • Minimum Design Loads Tue, 9 Dec 2003 06:28:15 -0700 (MST)

• Effland, Greg
  • RE: cost of field drilling holes Wed, 19 Nov 2003 08:22:34 -0700 (MST)
  • RE: Bolt edge distance-steel Wed, 19 Nov 2003 12:47:58 -0700 (MST)
  • RE: Unbraced Length Wed, 10 Dec 2003 09:48:50 -0700 (MST)

• EGHirsch
  • Re: Atlantic City Garage Collapse Thu, 30 Oct 2003 17:48:26 -0700 (MST)
  • Re: Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 19:32:08 -0700 (MST)
  • Re: Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 19:50:16 -0700 (MST)
  • Re: Paul Fratessa: GOOD RIDDANCE Thu, 13 Nov 2003 10:20:31 -0700 (MST)
  • Re: Secular Holiday Humor [Way Off Topic] Tue, 23 Dec 2003 19:25:39 -0700 (MST)

• Eknrinc
  • "Lamella" Wood Roof Construction Thu, 6 Nov 2003 10:57:45 -0700 (MST)

• engineer101
  • Foundation Torsion Wed, 8 Oct 2003 18:06:48 -0600 (MDT)

• Eric McAndrew
  • Design of cantilever/pumphandle footings on pile caps Wed, 1 Oct 2003 10:31:25 -0600 (MDT)

• Eric Ober
  • RE: question on K factors and P-delta analysis Thu, 16 Oct 2003 06:56:15 -0600 (MDT)
  • RE: k's in LRFD Third Edition Mon, 20 Oct 2003 06:35:57 -0600 (MDT)
  • RE: Two-way flat plate moment frame question Wed, 22 Oct 2003 12:28:34 -0600 (MDT)
  • RE: Job Check lists Thu, 23 Oct 2003 06:08:08 -0600 (MDT)
  • RE: Job Check lists Thu, 23 Oct 2003 07:06:09 -0600 (MDT)
  • RE: ASTM A 36 steel Wed, 12 Nov 2003 13:32:09 -0700 (MST)
  • RE: Galvanic corrosion Tue, 18 Nov 2003 12:26:56 -0700 (MST)
  • RE: X-braces Wed, 19 Nov 2003 10:40:39 -0700 (MST)

• Foy, Warren
  • RE: Army/Air Force Technical Documents Wed, 29 Oct 2003 15:15:37 -0700 (MST)

• Frank Hartzell
  • Re: Rebar Strengths Thu, 23 Oct 2003 16:52:39 -0600 (MDT)

• Fred Turner
  • Re: URM Building per UCBC Wed, 26 Nov 2003 10:16:04 -0700 (MST)

• G M
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Mon, 20 Oct 2003 15:18:41 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Mon, 20 Oct 2003 17:04:23 -0600 (MDT)
  • RE: Hardy Frames Thu, 23 Oct 2003 13:00:09 -0600 (MDT)
  • Expansion Joints in concrete slab Mon, 27 Oct 2003 12:57:07 -0700 (MST)
  • RE: foreigners... gotta love them Fri, 14 Nov 2003 10:52:55 -0700 (MST)
  • Rock Anchors - any recommendations Fri, 14 Nov 2003 16:04:06 -0700 (MST)
  • Re: Rock Anchors - any recommendations Sun, 16 Nov 2003 15:16:21 -0700 (MST)
  • Re: Joints in Slabs on Ground Thu, 20 Nov 2003 19:40:23 -0700 (MST)
  • Re: CMU software Thu, 20 Nov 2003 23:45:50 -0700 (MST)
  • Out-of-plane anchors Wed, 26 Nov 2003 14:42:45 -0700 (MST)
  • Re: Perforated shearwall design Wed, 3 Dec 2003 14:16:59 -0700 (MST)

• G Vishwanath
  • Re: seaint Digest for 5 Oct 2003 Mon, 6 Oct 2003 02:36:32 -0600 (MDT)
  • Please help admit our friend back Mon, 20 Oct 2003 09:52:42 -0600 (MDT)
  • Re: Off Topic - Thank You Sun, 2 Nov 2003 08:52:49 -0700 (MST)
  • Re: Connections Thu, 27 Nov 2003 05:46:30 -0700 (MST)
  • Re: Connections Sat, 29 Nov 2003 23:23:23 -0700 (MST)
  • Re: Connections Tue, 2 Dec 2003 01:48:04 -0700 (MST)
  • RE: Engineering Education Fri, 5 Dec 2003 02:51:57 -0700 (MST)
  • Weight of metal stud wall Wed, 10 Dec 2003 18:46:00 -0700 (MST)
  • Discussions on connections Thu, 18 Dec 2003 10:35:47 -0700 (MST)
  • Thoughts on Outsourcing Mon, 22 Dec 2003 03:29:57 -0700 (MST)

• Gale45man
  • Earthquake ground movement question Wed, 31 Dec 2003 18:27:44 -0700 (MST)

• Gary Ehrlich
  • RE: Concrete Text Books Tue, 21 Oct 2003 09:39:03 -0600 (MDT)
  • RE: Atlantic City Garage Collapse Fri, 31 Oct 2003 06:38:20 -0700 (MST)
  • RE: Steel-Detail: cost of field drilling holes Tue, 18 Nov 2003 06:17:32 -0700 (MST)
  • RE: Secular Holiday Humor [Way Off Topic] Tue, 23 Dec 2003 15:27:02 -0700 (MST)

• Gary Hodgson & Assoc.
  • RE: Philosophical Differences Tue, 30 Dec 2003 04:57:20 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 05:18:34 -0700 (MST)

• Gary Hodgson & Associates
  • Re: Butt-welding a gap Fri, 3 Oct 2003 05:51:16 -0600 (MDT)
  • Re: W Shape question Thu, 16 Oct 2003 05:45:26 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Tue, 21 Oct 2003 06:04:44 -0600 (MDT)
  • Re: Tests, etc. Fri, 7 Nov 2003 05:46:56 -0700 (MST)
  • RE: pool wall design Sat, 15 Nov 2003 07:02:20 -0700 (MST)
  • RE: pool wall design Sat, 15 Nov 2003 07:10:28 -0700 (MST)
  • RE: Joints in Slabs on Ground Sat, 15 Nov 2003 07:31:37 -0700 (MST)
  • RE: pool wall design Mon, 17 Nov 2003 05:56:35 -0700 (MST)
  • Re: cost of field drilling holes Wed, 19 Nov 2003 05:50:09 -0700 (MST)
  • Crane runway bumpers Wed, 19 Nov 2003 06:05:31 -0700 (MST)
  • Re: cost of field drilling holes Thu, 20 Nov 2003 05:53:59 -0700 (MST)
  • Re: Connections Thu, 27 Nov 2003 06:44:03 -0700 (MST)
  • Re: Connections Fri, 28 Nov 2003 05:39:13 -0700 (MST)
  • RE: Connections Tue, 2 Dec 2003 05:48:06 -0700 (MST)
  • RE: Connections Tue, 2 Dec 2003 06:03:36 -0700 (MST)
  • Re: Spec'ing PEMBs [was Slender CMU Wall Design] Wed, 3 Dec 2003 05:46:43 -0700 (MST)
  • RE: Connections Wed, 3 Dec 2003 06:09:12 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 05:56:56 -0700 (MST)
  • Overhead Electric Crane & Runway in Chile Fri, 5 Dec 2003 11:40:10 -0700 (MST)
  • Re: Weight of metal stud wall Thu, 11 Dec 2003 06:01:33 -0700 (MST)
  • Re: oh canada! Fri, 12 Dec 2003 13:24:17 -0700 (MST)
  • Re: Theatre Roof Sat, 13 Dec 2003 07:07:46 -0700 (MST)
  • Re: Ontario Pre-Start Health & Safety Review - storage racking Mon, 15 Dec 2003 05:42:00 -0700 (MST)
  • Re: stone Veneer support Tue, 16 Dec 2003 05:42:56 -0700 (MST)
  • RE: stone Veneer support Wed, 17 Dec 2003 07:10:41 -0700 (MST)
  • Re: Misc Comments Fri, 19 Dec 2003 05:56:24 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential - Scott Wed, 24 Dec 2003 06:03:24 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 13:56:50 -0700 (MST)
  • Re: Philosophical Differences Wed, 31 Dec 2003 06:15:05 -0700 (MST)
  • RE: Misc Opinions Wed, 31 Dec 2003 06:21:33 -0700 (MST)
  • RE: Fee for Custom Residence Wed, 31 Dec 2003 06:27:41 -0700 (MST)

• Gerard Madden, SE
  • Barn Structure Tue, 7 Oct 2003 15:58:38 -0600 (MDT)
  • RE: Barn Structure Tue, 7 Oct 2003 18:34:45 -0600 (MDT)
  • RE: Foundation Torsion Wed, 8 Oct 2003 18:24:44 -0600 (MDT)
  • RE: Wood continuous beams Thu, 9 Oct 2003 10:52:06 -0600 (MDT)
  • RE: Need help with Structural software Fri, 10 Oct 2003 10:59:16 -0600 (MDT)
  • RE: Rigid Wood Diaphragm? Fri, 10 Oct 2003 11:30:50 -0600 (MDT)
  • This is only a Test Wed, 15 Oct 2003 14:24:08 -0600 (MDT)
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Wed, 15 Oct 2003 19:42:06 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Thu, 16 Oct 2003 11:48:55 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Mon, 20 Oct 2003 18:41:23 -0600 (MDT)
  • RE: Concrete Text Books Tue, 21 Oct 2003 13:43:00 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Tue, 21 Oct 2003 14:06:20 -0600 (MDT)
  • RE: Plan Check Tue, 21 Oct 2003 19:09:23 -0600 (MDT)
  • RE: Concrete Text Books Tue, 21 Oct 2003 21:08:46 -0600 (MDT)
  • RE: Two-way flat plate moment frame question Tue, 21 Oct 2003 21:36:53 -0600 (MDT)
  • RE: Hardy Frames Thu, 23 Oct 2003 11:03:18 -0600 (MDT)
  • Glulam Roof Girders in a Tilt-Up Tue, 28 Oct 2003 16:48:34 -0700 (MST)
  • RE: Glulam Roof Girders in a Tilt-Up Wed, 29 Oct 2003 10:36:00 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 11:45:51 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 16:43:03 -0700 (MST)
  • H1-B -Abusers Mon, 10 Nov 2003 19:58:55 -0700 (MST)
  • RE: H1-B -Abusers Mon, 10 Nov 2003 21:56:25 -0700 (MST)
  • RE: out of plane anchorage Question Wed, 12 Nov 2003 10:50:45 -0700 (MST)
  • RE: ASTM A 36 steel Wed, 12 Nov 2003 11:24:31 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 12:55:43 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 14:38:37 -0700 (MST)
  • RE: Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 17:01:32 -0700 (MST)
  • RE: seismic design of stairs Wed, 12 Nov 2003 18:21:21 -0700 (MST)
  • RE: Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 20:03:36 -0700 (MST)
  • RE: Paul Fratessa: when did he die ???? Wed, 12 Nov 2003 22:30:47 -0700 (MST)
  • RE: Paul Fratessa: GOOD RIDDANCE Thu, 13 Nov 2003 11:33:06 -0700 (MST)
  • RE: shear bolts- glulam Sun, 16 Nov 2003 09:42:27 -0700 (MST)
  • RE: 2003 IBC load combnations & wood design Wed, 19 Nov 2003 10:53:19 -0700 (MST)
  • RE: 1930's Poured in Place Concrete Building Thu, 20 Nov 2003 00:24:02 -0700 (MST)
  • RE: FEMA 350 Tue, 2 Dec 2003 13:21:45 -0700 (MST)
  • Acceptable Level of Overstress Wed, 3 Dec 2003 20:05:53 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Thu, 4 Dec 2003 00:02:10 -0700 (MST)
  • RE: Acceptable Level of Overstress Thu, 4 Dec 2003 10:41:41 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Thu, 4 Dec 2003 12:07:23 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Thu, 4 Dec 2003 12:18:55 -0700 (MST)
  • RE: Acceptable Level of Overstress Thu, 4 Dec 2003 14:34:21 -0700 (MST)
  • RE: Paper Space - was: Engineering Education Reply to Bill P. from Gerard Sat, 6 Dec 2003 11:55:21 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 12:28:30 -0700 (MST)
  • RE: Wood shear panels Wed, 10 Dec 2003 13:31:55 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 10:55:17 -0700 (MST)
  • RE: CA IBC Thu, 11 Dec 2003 16:35:09 -0700 (MST)
  • RE: Health care Mon, 29 Dec 2003 13:09:17 -0700 (MST)

• Gil Brock
  • RE: Two-way flat plate moment frame question Wed, 22 Oct 2003 19:26:28 -0600 (MDT)
  • Re: Flat plate punching shear question Wed, 29 Oct 2003 17:00:44 -0700 (MST)
  • Re: Interaction diagram Mon, 24 Nov 2003 18:15:48 -0700 (MST)
  • Re: Minimum reinforcement for structural integrity at slab-column connections Tue, 30 Dec 2003 17:10:59 -0700 (MST)

• Glenn Deppert
  • Conodeck Joists Thu, 30 Oct 2003 08:12:48 -0700 (MST)

• Greg Spontak
  • Re: calculators at licensing exams Wed, 5 Nov 2003 11:19:46 -0700 (MST)

• GSKWY
  • Fibermesh questions Sat, 4 Oct 2003 17:37:29 -0600 (MDT)
  • Re: Pipe Analysis Thu, 9 Oct 2003 20:47:45 -0600 (MDT)
  • Re: Water Proof Membrane Wed, 15 Oct 2003 20:30:46 -0600 (MDT)
  • For the Record Thu, 16 Oct 2003 08:02:28 -0600 (MDT)
  • Re: Q: Flatness Tolerances for Residenti Fri, 17 Oct 2003 10:47:53 -0600 (MDT)
  • Re: Water Proof Membrane Sun, 19 Oct 2003 07:39:08 -0600 (MDT)
  • Welded Wire Reinforcement Mon, 20 Oct 2003 07:59:37 -0600 (MDT)
  • Re: Concrete Text Books Tue, 21 Oct 2003 20:35:10 -0600 (MDT)
  • Re: Concrete Text Books Tue, 21 Oct 2003 21:42:30 -0600 (MDT)
  • Re: microwave test for measuring water content in fresh concrete Fri, 24 Oct 2003 08:55:19 -0600 (MDT)
  • Slabs on Compressible Voids Fri, 24 Oct 2003 10:31:40 -0600 (MDT)
  • Re: Concrete Text Books Tue, 28 Oct 2003 17:24:38 -0700 (MST)
  • Army/Air Force Technical Documents Wed, 29 Oct 2003 12:03:05 -0700 (MST)
  • Re: Army/Air Force Technical Documents Wed, 29 Oct 2003 13:22:15 -0700 (MST)
  • Re: Army/Air Force Technical Documents Wed, 29 Oct 2003 14:45:29 -0700 (MST)
  • Army/Air Force Technical Documents Thu, 30 Oct 2003 07:08:05 -0700 (MST)
  • Re: Atlantic City Garage Collapse Thu, 30 Oct 2003 17:15:20 -0700 (MST)
  • Re: Atlantic City Garage Collapse Thu, 30 Oct 2003 18:30:04 -0700 (MST)
  • Special Inspection Fri, 31 Oct 2003 09:04:25 -0700 (MST)
  • Re: Special Inspection Fri, 31 Oct 2003 10:59:32 -0700 (MST)
  • Re: Special Inspection Sat, 1 Nov 2003 07:49:46 -0700 (MST)
  • Re: Special Inspection Mon, 3 Nov 2003 08:40:20 -0700 (MST)
  • Re: SE Tests Tue, 4 Nov 2003 10:06:37 -0700 (MST)
  • Re: SE Tests Tue, 4 Nov 2003 10:25:52 -0700 (MST)
  • Re: SE Tests Thu, 6 Nov 2003 10:46:59 -0700 (MST)
  • SE Tests Thu, 6 Nov 2003 11:30:51 -0700 (MST)
  • Re: SE Tests and Seals and Signatures Thu, 6 Nov 2003 17:29:33 -0700 (MST)
  • Canandian Concrete Code Question Thu, 6 Nov 2003 17:39:49 -0700 (MST)
  • Concrete Floor Textbook Sat, 8 Nov 2003 13:42:54 -0700 (MST)
  • Re: SICK PROFESSION Mon, 10 Nov 2003 07:13:02 -0700 (MST)
  • Re: SICK PROFESSION Mon, 10 Nov 2003 10:34:25 -0700 (MST)
  • Re: SICK PROFESSION Mon, 10 Nov 2003 18:11:14 -0700 (MST)
  • ASTM A 36 steel Wed, 12 Nov 2003 10:40:36 -0700 (MST)
  • Re: ASTM A 36 steel Wed, 12 Nov 2003 13:03:56 -0700 (MST)
  • Re: ASTM A 36 steel Wed, 12 Nov 2003 13:43:24 -0700 (MST)
  • Re: McStructural? Wed, 12 Nov 2003 20:14:08 -0700 (MST)
  • Joints in Slabs on Ground Fri, 14 Nov 2003 10:22:26 -0700 (MST)
  • Re: Joints in Slabs on Ground Sat, 15 Nov 2003 07:35:30 -0700 (MST)
  • Re: Joints in Slabs on Ground Tue, 18 Nov 2003 18:16:28 -0700 (MST)
  • Re: Joints in Slabs on Ground Wed, 19 Nov 2003 06:00:26 -0700 (MST)
  • Re: Joints in Slabs on Ground Thu, 20 Nov 2003 20:53:13 -0700 (MST)
  • Slab on Ground Joint Spacings Fri, 21 Nov 2003 07:54:44 -0700 (MST)
  • Re: Connections Mon, 1 Dec 2003 19:39:11 -0700 (MST)
  • Was connections .. Tue, 2 Dec 2003 08:48:39 -0700 (MST)
  • Finite Element vs. Strip Design Wed, 3 Dec 2003 20:18:23 -0700 (MST)
  • Fly Ash Thu, 4 Dec 2003 08:39:13 -0700 (MST)
  • Re: Creosote Ban? Mon, 8 Dec 2003 07:14:15 -0700 (MST)
  • Re: Q: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 11:05:48 -0700 (MST)
  • Re: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 11:41:17 -0700 (MST)
  • Re: Raymond Step Tapered Piles Tue, 9 Dec 2003 06:14:26 -0700 (MST)
  • Making a difference ?? Fri, 12 Dec 2003 10:06:57 -0700 (MST)
  • Making a difference ?? Sat, 13 Dec 2003 12:38:25 -0700 (MST)
  • JIS Mon, 15 Dec 2003 06:39:20 -0700 (MST)
  • Finite Element Modeling Tue, 16 Dec 2003 06:04:32 -0700 (MST)
  • Making a difference Tue, 16 Dec 2003 08:25:59 -0700 (MST)
  • Re: ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 11:16:47 -0700 (MST)
  • Re: ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 11:22:39 -0700 (MST)
  • Re: ACI Detailing Manual SP-66(94) Wed, 17 Dec 2003 06:30:29 -0700 (MST)
  • Misc Comments Thu, 18 Dec 2003 09:51:08 -0700 (MST)
  • Re: Misc Comments Thu, 18 Dec 2003 12:05:13 -0700 (MST)
  • Misc Opinions Mon, 29 Dec 2003 14:47:04 -0700 (MST)
  • Re: seismic cracking of SOG Mon, 29 Dec 2003 15:52:23 -0700 (MST)
  • Old ASTMS Tue, 30 Dec 2003 09:56:44 -0700 (MST)
  • Re: Old ASTMS Tue, 30 Dec 2003 11:00:20 -0700 (MST)
  • Re: Old ASTMS Wed, 31 Dec 2003 09:04:19 -0700 (MST)

• Haan, Scott M.
  • RE: question on K factors and P-delta analysis Wed, 15 Oct 2003 14:04:33 -0600 (MDT)
  • 2x2x3/16 plate washers, round washers ok? Mon, 1 Dec 2003 11:13:22 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 11:48:33 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 13:40:38 -0700 (MST)
  • RE: Connections Wed, 3 Dec 2003 10:45:46 -0700 (MST)
  • RE: Plated wood truss failures? Thu, 4 Dec 2003 12:21:53 -0700 (MST)

• Hans Boge Jr.
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 06:52:22 -0600 (MDT)
  • RE: Q: Flatness Tolerances for Residenti Fri, 17 Oct 2003 08:45:32 -0600 (MDT)
  • RE: Rebar Strengths Wed, 22 Oct 2003 14:44:52 -0600 (MDT)
  • Job Check lists Wed, 22 Oct 2003 15:14:01 -0600 (MDT)
  • RE: Rebar Strengths Fri, 24 Oct 2003 06:47:05 -0600 (MDT)

• Hans E Boge
  • RE: Galvanic corrosion Tue, 18 Nov 2003 11:44:16 -0700 (MST)
  • RE: E/O Insurance Tue, 25 Nov 2003 10:08:51 -0700 (MST)

• HBAP
  • Masonry lap splice Tue, 28 Oct 2003 08:10:37 -0700 (MST)
  • ASTM Tue, 30 Dec 2003 14:07:50 -0700 (MST)

• HEATH MITCHELL
  • RE: Making a difference ?? Mon, 15 Dec 2003 15:17:07 -0700 (MST)
  • RE: Making a difference ?? Mon, 15 Dec 2003 16:42:47 -0700 (MST)
  • RE: Closure Pour versus Construction Joint Tue, 16 Dec 2003 10:07:29 -0700 (MST)
  • RE: Making a difference Tue, 16 Dec 2003 11:33:20 -0700 (MST)

• Heide Hooks
  • QUESTION REGARDING WIND UPLIFT Tue, 7 Oct 2003 08:58:57 -0600 (MDT)
  • RE: Angle in Bending Thu, 4 Dec 2003 13:10:25 -0700 (MST)

• hennebrh
  • [no subject] Sat, 18 Oct 2003 04:09:39 -0600 (MDT)

• Himat Solanki
  • Re: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 07:23:42 -0600 (MDT)
  • Re: Concrete Text Books Tue, 21 Oct 2003 08:41:52 -0600 (MDT)
  • RE: Concrete Text Books Tue, 21 Oct 2003 09:39:47 -0600 (MDT)
  • Re: Flag-Pole Foundations for light framing Wed, 19 Nov 2003 14:35:58 -0700 (MST)

• Hood, Matthew O.
  • AISC Seismic for ASD Fri, 5 Dec 2003 14:24:56 -0700 (MST)

• Huffman, Sharlie TRAN:EX
  • RE: oh canada! Fri, 12 Dec 2003 16:20:36 -0700 (MST)
  • RE: oh canada! Wed, 17 Dec 2003 13:11:57 -0700 (MST)
  • RE: Fee for Custom Residence Mon, 29 Dec 2003 13:53:53 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - S Mon, 29 Dec 2003 15:41:32 -0700 (MST)
  • RE: Fee for Custom Residence Mon, 29 Dec 2003 16:45:06 -0700 (MST)
  • RE: seismic cracking of SOG Mon, 29 Dec 2003 17:18:34 -0700 (MST)
  • RE: seismic cracking of SOG Tue, 30 Dec 2003 13:55:51 -0700 (MST)
  • RE: Fee for Custom Residence Tue, 30 Dec 2003 16:10:08 -0700 (MST)

• IRV FRUCHTMAN
  • RE: Hyatt Regency Collapse (was:E: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 08:13:10 -0600 (MDT)
  • High-Impact Glazing Thu, 4 Dec 2003 18:30:44 -0700 (MST)
  • Re: Cedar Fri, 5 Dec 2003 08:11:42 -0700 (MST)

• j.n.sigalas
  • Re: Merry Christmas: and Thank you Wed, 24 Dec 2003 12:04:58 -0700 (MST)

• Jake Laufer
  • Discovery Adventure Series Seeks Structural Engineer Wed, 12 Nov 2003 14:23:32 -0700 (MST)

• Jake Watson
  • RE: GUI-FEM Wed, 1 Oct 2003 08:25:35 -0600 (MDT)
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 09:47:31 -0600 (MDT)
  • RE: Contact loads from moving loads Wed, 8 Oct 2003 07:23:49 -0600 (MDT)
  • RE: Rigid Wood Diaphragm? Thu, 9 Oct 2003 19:37:07 -0600 (MDT)
  • RE: Pipe Analysis Thu, 9 Oct 2003 19:49:31 -0600 (MDT)
  • RE: Rigid Diaphragm for a L Shaped Building Mon, 13 Oct 2003 10:02:27 -0600 (MDT)
  • RE: Reinforcing vs welded wire fabric Wed, 15 Oct 2003 17:55:46 -0600 (MDT)
  • RE: k's in LRFD Third Edition Fri, 17 Oct 2003 13:54:47 -0600 (MDT)
  • RE: Horizontal bracing seismic provisions (AISC or IBC) Thu, 23 Oct 2003 06:16:48 -0600 (MDT)
  • RE: Job Check lists Thu, 23 Oct 2003 06:25:08 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Thu, 23 Oct 2003 12:25:12 -0600 (MDT)
  • Precast tension stresses Fri, 24 Oct 2003 08:35:13 -0600 (MDT)
  • RE: Glulam Roof Girders in a Tilt-Up Wed, 29 Oct 2003 08:06:39 -0700 (MST)
  • RE: Glulam Roof Girders in a Tilt-Up Wed, 29 Oct 2003 21:49:09 -0700 (MST)
  • RE: Aluminum Wed, 5 Nov 2003 11:31:54 -0700 (MST)
  • [no subject] Thu, 6 Nov 2003 10:48:52 -0700 (MST)
  • RE: Unbraced Length for Stair Stringers? Fri, 7 Nov 2003 07:29:54 -0700 (MST)
  • RE: Relative Rigity Calculations? Fri, 7 Nov 2003 07:41:47 -0700 (MST)
  • RE: SICK PROFESSION Sun, 9 Nov 2003 18:38:27 -0700 (MST)
  • RE: wind loading on fences in IBC land Thu, 20 Nov 2003 05:21:32 -0700 (MST)
  • RE: 1930's Poured in Place Concrete Building Thu, 20 Nov 2003 05:36:57 -0700 (MST)
  • RE: Paso Robles Earthquake Wed, 24 Dec 2003 17:27:41 -0700 (MST)
  • RE: Paso Robles Earthquake Thu, 25 Dec 2003 20:54:40 -0700 (MST)
  • RE: Fee for Custom Residence Mon, 29 Dec 2003 14:20:08 -0700 (MST)
  • RE: Question on ASCE 7-02 Load Combinations Mon, 29 Dec 2003 14:21:28 -0700 (MST)

• Jason Emoto
  • Re: Job Check lists Wed, 22 Oct 2003 18:23:59 -0600 (MDT)
  • Re: brick walls Tue, 23 Dec 2003 11:59:34 -0700 (MST)

• Jason Kilgore
  • Re: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 10:12:47 -0600 (MDT)
  • Off Topic - Charity Mon, 6 Oct 2003 14:25:09 -0600 (MDT)
  • Re: Thickened Floor Slabs Tue, 7 Oct 2003 10:45:19 -0600 (MDT)
  • Re: Contact loads from moving loads Wed, 8 Oct 2003 07:10:59 -0600 (MDT)
  • Re: Posting Live Load Thu, 9 Oct 2003 08:22:35 -0600 (MDT)
  • Off Topic - Paintball Mon, 13 Oct 2003 13:17:11 -0600 (MDT)
  • Re: frost heave Mon, 13 Oct 2003 15:39:10 -0600 (MDT)
  • Re: Reinforcing vs welded wire fabric Thu, 16 Oct 2003 07:18:52 -0600 (MDT)
  • Re: Baseplate Grouting Thu, 16 Oct 2003 10:49:53 -0600 (MDT)
  • Re: allowable foundation and lateral pressure Wed, 22 Oct 2003 07:02:47 -0600 (MDT)
  • Rebar Strengths Wed, 22 Oct 2003 13:46:09 -0600 (MDT)
  • Re: Rebar Strengths Thu, 23 Oct 2003 07:46:01 -0600 (MDT)
  • Re: Expansion Joints in concrete slab Mon, 27 Oct 2003 13:37:48 -0700 (MST)
  • Re: minimum wind loads in the IBC Thu, 30 Oct 2003 07:18:37 -0700 (MST)
  • Re: steel formdeck as shearwall? Thu, 30 Oct 2003 09:11:16 -0700 (MST)
  • Re: Column located on 4" existing concrete slab Thu, 30 Oct 2003 12:10:41 -0700 (MST)
  • Re: CA SE Fri, 31 Oct 2003 10:39:58 -0700 (MST)
  • Re: CA SE / SE2 Tue, 4 Nov 2003 07:15:56 -0700 (MST)
  • Re: SE Tests Tue, 4 Nov 2003 10:19:46 -0700 (MST)
  • Aluminum Tue, 4 Nov 2003 12:26:14 -0700 (MST)
  • Re: Aluminum Tue, 4 Nov 2003 12:55:09 -0700 (MST)
  • Re: Regional permitting differences - calculations Thu, 6 Nov 2003 10:47:00 -0700 (MST)
  • Re: Aluminum Thu, 6 Nov 2003 10:57:27 -0700 (MST)
  • Re: Seals and signatures Thu, 6 Nov 2003 15:21:04 -0700 (MST)
  • Re: Unbraced Length for Stair Stringers? Fri, 7 Nov 2003 07:53:11 -0700 (MST)
  • staples vs. nails Wed, 12 Nov 2003 09:49:51 -0700 (MST)
  • Re: ASTM A 36 steel Wed, 12 Nov 2003 11:07:47 -0700 (MST)
  • Re: ASTM A 36 steel Wed, 12 Nov 2003 11:16:59 -0700 (MST)
  • Re: Shear tranfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 16:07:10 -0700 (MST)
  • Re: Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 09:12:24 -0700 (MST)
  • Re: Uplift on Belled Drilled Pier Fri, 14 Nov 2003 12:28:37 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Mon, 17 Nov 2003 06:59:40 -0700 (MST)
  • Re: shear bolts- glulam Mon, 17 Nov 2003 07:30:46 -0700 (MST)
  • Title of "Engineer" Mon, 17 Nov 2003 15:47:41 -0700 (MST)
  • X-braces Tue, 18 Nov 2003 18:19:02 -0700 (MST)
  • Re: cost of field drilling holes Wed, 19 Nov 2003 06:50:43 -0700 (MST)
  • Re: Internal Wind Pressure for Partially Enclosed Bldg. Wed, 19 Nov 2003 14:06:29 -0700 (MST)
  • Re: Engineering Education Tue, 2 Dec 2003 11:10:06 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 08:23:56 -0700 (MST)
  • Re: Engineering Education Reply to Bill P. Thu, 4 Dec 2003 11:11:09 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 11:13:03 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 12:02:43 -0700 (MST)
  • Re: Overhead Electric Crane & Runway in Chile Fri, 5 Dec 2003 12:32:06 -0700 (MST)
  • Re: Designing Masonry to Span Horizontally Tue, 9 Dec 2003 09:08:36 -0700 (MST)

• Jason Tani
  • Expected soil settlement. Fri, 14 Nov 2003 16:02:58 -0700 (MST)

• Jason W. Kilgore
  • RE: IBC 2003 Eqn. 16-50 Thu, 11 Dec 2003 09:52:45 -0700 (MST)
  • CA & NFPA 5000 Thu, 11 Dec 2003 13:24:36 -0700 (MST)
  • RE: stone Veneer support Mon, 15 Dec 2003 08:10:12 -0700 (MST)
  • RE: Tell me what's really on your mind Mon, 15 Dec 2003 16:27:46 -0700 (MST)
  • RE: stone Veneer support Tue, 16 Dec 2003 08:06:37 -0700 (MST)
  • RE: SEII results - anyone Tue, 16 Dec 2003 14:02:22 -0700 (MST)
  • RE: Railing clearances Mon, 22 Dec 2003 11:00:12 -0700 (MST)
  • RE: consistency Tue, 23 Dec 2003 08:12:23 -0700 (MST)
  • brick walls Tue, 23 Dec 2003 11:46:50 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - S Fri, 26 Dec 2003 14:24:36 -0700 (MST)
  • RE: Info on Bam Quake, and how to help Mon, 29 Dec 2003 09:55:49 -0700 (MST)
  • RE: Question on ASCE 7-02 Load Combinations Mon, 29 Dec 2003 14:38:00 -0700 (MST)

• Javier Encinas
  • Re: Component & Cladding for Open Structures Tue, 16 Dec 2003 13:54:08 -0700 (MST)

• jccpc
  • Re: Mold Remediation Mon, 13 Oct 2003 08:11:59 -0600 (MDT)
  • Re: Water Proof Membrane Mon, 13 Oct 2003 08:14:43 -0600 (MDT)
  • Re: Q: Flatness Tolerances for Residenti Fri, 17 Oct 2003 09:07:15 -0600 (MDT)
  • Re: Flatness Tolerances for Residential Slab Mon, 20 Oct 2003 08:12:43 -0600 (MDT)
  • Construction accounting software Thu, 23 Oct 2003 13:12:28 -0600 (MDT)
  • Re: Residential Construction Performance Guidelines (WAS: Q: Flatness Tolerances for Residential Slab) Mon, 27 Oct 2003 10:27:35 -0700 (MST)
  • Re: Atlantic City Garage Collapse Fri, 31 Oct 2003 11:00:43 -0700 (MST)
  • Re: foreigners... gotta love them Wed, 12 Nov 2003 12:50:38 -0700 (MST)
  • Re: oh canada! Keeping the American Spirit Alive and other such non-engineering issues Fri, 12 Dec 2003 13:28:33 -0700 (MST)

• JD S
  • Outsourcing: Old phenamena, new cry! Mon, 22 Dec 2003 01:09:21 -0700 (MST)

• jencinas
  • Re: FEMA 350 Tue, 2 Dec 2003 13:24:11 -0700 (MST)

• Jeremy Kuhn
  • RE: Structural Engineers on TV Mon, 6 Oct 2003 05:45:55 -0600 (MDT)
  • RE: Crane runway bumpers Wed, 19 Nov 2003 08:30:32 -0700 (MST)

• Jesse D. Moore
  • Fee for Custom Residence Wed, 24 Dec 2003 07:35:43 -0700 (MST)

• Jim Getaz
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Fri, 17 Oct 2003 06:21:35 -0600 (MDT)
  • RE: SICK PROFESSION Sun, 9 Nov 2003 09:11:06 -0700 (MST)
  • Re: Hanger Reinforcement - Precast Spandrels Sun, 9 Nov 2003 09:36:57 -0700 (MST)
  • Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 12:17:01 -0700 (MST)
  • Re: Galvanized Rebar Tue, 18 Nov 2003 06:08:15 -0700 (MST)
  • Re: How to reduce angle size? Thu, 20 Nov 2003 05:35:07 -0700 (MST)
  • RE: Flag-Pole Foundations for light framing Thu, 20 Nov 2003 05:42:13 -0700 (MST)
  • Re: Eliminate Pop-ups (was Re: Tell me what's really on your mind ) Fri, 19 Dec 2003 06:16:14 -0700 (MST)

• Jim L Chatterley
  • Re: steel formdeck as shearwall? Mon, 3 Nov 2003 09:12:28 -0700 (MST)

• Jim Persing
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 14:46:04 -0600 (MDT)
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 15:30:50 -0600 (MDT)
  • RE: Fibermesh questions Tue, 7 Oct 2003 08:17:07 -0600 (MDT)
  • RE: Barn Structure Tue, 7 Oct 2003 18:03:46 -0600 (MDT)
  • RE: Foundation Torsion Wed, 8 Oct 2003 18:14:48 -0600 (MDT)
  • RE: Water Proof Membrane Fri, 10 Oct 2003 14:46:04 -0600 (MDT)
  • RE: Rigid Diaphragm for a L Shaped Building Mon, 13 Oct 2003 11:42:29 -0600 (MDT)
  • Baseplate Grouting Thu, 16 Oct 2003 10:25:09 -0600 (MDT)
  • RE: Hyatt Regency Collapse (was:E: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 17:06:01 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Tue, 21 Oct 2003 15:09:51 -0600 (MDT)
  • RE: blast and progressive collapse Fri, 24 Oct 2003 12:40:22 -0600 (MDT)
  • RE: Glulam Roof Girders in a Tilt-Up Thu, 30 Oct 2003 10:36:55 -0700 (MST)
  • RE: Special Inspection Fri, 31 Oct 2003 11:28:58 -0700 (MST)
  • RE: Special Inspection Mon, 3 Nov 2003 08:36:02 -0700 (MST)
  • Seals and signatures Thu, 6 Nov 2003 14:53:14 -0700 (MST)
  • RE: Seals and signatures Thu, 6 Nov 2003 15:41:41 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 17:23:59 -0700 (MST)
  • RE: pool wall design Fri, 14 Nov 2003 11:22:05 -0700 (MST)
  • RE: pool wall design Fri, 14 Nov 2003 11:31:21 -0700 (MST)
  • RE: Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 15:11:15 -0700 (MST)
  • RE: CMU software Wed, 19 Nov 2003 09:48:31 -0700 (MST)
  • RE: Flag-Pole Foundations for light framing Wed, 19 Nov 2003 14:50:49 -0700 (MST)
  • RE: Shear wall Beam Design Tue, 25 Nov 2003 10:31:16 -0700 (MST)
  • RE: Connections Tue, 2 Dec 2003 09:31:07 -0700 (MST)
  • RE: Connections Wed, 3 Dec 2003 12:39:00 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 10:59:33 -0700 (MST)
  • RE: 30" TJ50 Capacity Thu, 4 Dec 2003 12:31:32 -0700 (MST)
  • RE: Angle in Bending Thu, 4 Dec 2003 13:00:14 -0700 (MST)
  • RE: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 11:55:49 -0700 (MST)
  • Re: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 11:59:32 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 12:32:21 -0700 (MST)
  • RE: oh canada! Tue, 16 Dec 2003 16:29:17 -0700 (MST)
  • RE: oh canada! Thu, 18 Dec 2003 10:21:48 -0700 (MST)
  • RE: Masonry Structural Notes and Specifications Tue, 23 Dec 2003 08:53:37 -0700 (MST)
  • RE: masonry cleanouts Tue, 23 Dec 2003 14:40:46 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 08:22:53 -0700 (MST)
  • RE: NYTimes.com Article: Halliburton Contracts in Iraq: The Struggle to Manage Costs Tue, 30 Dec 2003 08:48:46 -0700 (MST)
  • RE: IRAN QUAKE/can we discuss ths? Wed, 31 Dec 2003 10:52:11 -0700 (MST)

• Jim Schnitzhofer
  • Cantilever Pile CAps Wed, 15 Oct 2003 14:59:26 -0600 (MDT)

• Joe Grill
  • Vertical Post in Pipe railing Wed, 10 Dec 2003 11:16:45 -0700 (MST)

• Joe Landi
  • Question regarding rebar corrosion Mon, 8 Dec 2003 10:28:19 -0700 (MST)

• John C. Jones
  • RE: Thickened Floor Slabs 2 Tue, 7 Oct 2003 12:19:58 -0600 (MDT)
  • steel formdeck as shearwall? Thu, 30 Oct 2003 08:49:53 -0700 (MST)
  • RE: steel formdeck as shearwall? Thu, 30 Oct 2003 09:17:24 -0700 (MST)
  • RE: steel formdeck as shearwall? Thu, 30 Oct 2003 09:39:18 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 05:19:05 -0700 (MST)
  • RE: CA SE Fri, 31 Oct 2003 05:34:26 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 08:25:33 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 08:47:23 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 10:25:40 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 10:41:56 -0700 (MST)
  • RE: CA SE Fri, 31 Oct 2003 10:43:16 -0700 (MST)
  • RE: steel formdeck as shearwall? Mon, 3 Nov 2003 07:51:29 -0700 (MST)
  • RE: SE Tests Tue, 4 Nov 2003 10:08:13 -0700 (MST)
  • RE: SE Tests Tue, 4 Nov 2003 12:03:55 -0700 (MST)
  • Regional permitting differences - calculations Wed, 5 Nov 2003 11:08:47 -0700 (MST)
  • RE: pre engineered metal building detailing Tue, 11 Nov 2003 07:05:35 -0700 (MST)
  • RE: E/O Insurance Wed, 19 Nov 2003 08:04:36 -0700 (MST)
  • RE: E/O Insurance Tue, 25 Nov 2003 15:39:17 -0700 (MST)
  • RE: Happy Thanksgiving, to ALL Wed, 26 Nov 2003 09:26:37 -0700 (MST)
  • RE: Lateral Deflection of Masonry Wall Building Mon, 1 Dec 2003 09:11:33 -0700 (MST)
  • RE: Spec'ing PEMBs [was Lateral Deflection of Masonry Wall Building] Tue, 2 Dec 2003 10:30:57 -0700 (MST)
  • RE: Designing Masonry to Span Horizontally Tue, 9 Dec 2003 09:10:48 -0700 (MST)
  • RE: Making a difference ?? Fri, 12 Dec 2003 10:12:28 -0700 (MST)
  • RE: Making a difference ?? Fri, 12 Dec 2003 13:59:50 -0700 (MST)
  • RE: oh canada! Fri, 12 Dec 2003 14:48:01 -0700 (MST)
  • RE: Making a difference ?? Fri, 12 Dec 2003 15:06:39 -0700 (MST)
  • RE: Making a difference ?? Fri, 12 Dec 2003 15:32:13 -0700 (MST)
  • SEII results - anyone Tue, 16 Dec 2003 12:50:50 -0700 (MST)
  • RE: SEII results - anyone Tue, 16 Dec 2003 13:01:13 -0700 (MST)
  • RE: SEII results - anyone Tue, 16 Dec 2003 14:05:00 -0700 (MST)
  • RE: S.E. Position Tue, 16 Dec 2003 15:06:32 -0700 (MST)
  • RE: SEII results - anyone Tue, 16 Dec 2003 15:34:29 -0700 (MST)
  • RE: SEII results - anyone Wed, 17 Dec 2003 05:21:08 -0700 (MST)
  • RE: Civil engineering 900 years ago Wed, 17 Dec 2003 08:13:18 -0700 (MST)
  • RE: oh canada! Wed, 17 Dec 2003 08:47:37 -0700 (MST)
  • RE: consistency Tue, 23 Dec 2003 06:15:05 -0700 (MST)
  • RE: Secular Holiday Humor [Way Off Topic] Tue, 23 Dec 2003 06:21:28 -0700 (MST)
  • RE: Fee for Custom Residence Wed, 24 Dec 2003 08:44:15 -0700 (MST)
  • RE: Fee for Custom Residence Mon, 29 Dec 2003 13:56:19 -0700 (MST)
  • RE: Louisiana Engineers Wed, 31 Dec 2003 12:11:22 -0700 (MST)

• John H. Cato, jr, R.A.
  • Re: Contact loads from moving loads Wed, 8 Oct 2003 10:33:55 -0600 (MDT)
  • Re: Outsourcing - light commercial and high end residential Thu, 18 Dec 2003 19:43:21 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Thu, 18 Dec 2003 19:51:14 -0700 (MST)

• John P. Riley
  • E/O Insurance Tue, 18 Nov 2003 18:14:41 -0700 (MST)
  • Connections Wed, 26 Nov 2003 12:01:46 -0700 (MST)
  • Re: Connections Fri, 28 Nov 2003 06:02:32 -0700 (MST)
  • Liquefaction and Slabs-on-grade Tue, 16 Dec 2003 14:24:31 -0700 (MST)
  • Outsourcing - light commercial and high end residential Sat, 20 Dec 2003 10:33:23 -0700 (MST)
  • Outsourcing Mon, 22 Dec 2003 07:29:23 -0700 (MST)
  • RE: Outsourcing - light commercial and high end residential - Scott Fri, 26 Dec 2003 06:55:05 -0700 (MST)
  • Healthcare Mon, 29 Dec 2003 08:05:13 -0700 (MST)
  • Health care Mon, 29 Dec 2003 08:05:33 -0700 (MST)

• John Sieszycki
  • Re: Viruses (again) Wed, 15 Oct 2003 13:38:59 -0600 (MDT)
  • Re: Atlantic City Garage Collapse Thu, 30 Oct 2003 20:55:18 -0700 (MST)
  • DC PE needed (drawings review) Thu, 11 Dec 2003 07:02:45 -0700 (MST)
  • Re: DC PE needed (drawings review) Thu, 11 Dec 2003 09:45:13 -0700 (MST)

• John Whitty
  • RE: Aluminum Tue, 4 Nov 2003 12:36:13 -0700 (MST)
  • RE: Aluminum Tue, 4 Nov 2003 13:43:09 -0700 (MST)
  • RE: Connections Wed, 26 Nov 2003 12:34:28 -0700 (MST)
  • RE: Schooling (was Connections) Wed, 3 Dec 2003 06:59:39 -0700 (MST)

• Jose Salinas
  • Shear wall Beam Design Tue, 25 Nov 2003 09:44:13 -0700 (MST)
  • Re: Shear wall Beam Design Tue, 25 Nov 2003 10:01:28 -0700 (MST)

• Joseph Grill
  • Contact loads from moving loads Tue, 7 Oct 2003 21:05:50 -0600 (MDT)
  • Re: Contact loads from moving loads Wed, 8 Oct 2003 06:23:59 -0600 (MDT)

• Josh Plummer
  • Re: CA SE Fri, 31 Oct 2003 17:44:02 -0700 (MST)

• k_mini
  • [no subject] Fri, 10 Oct 2003 04:14:21 -0600 (MDT)

• kamal Aghbal
  • Gaps in the annular space Fri, 3 Oct 2003 18:05:27 -0600 (MDT)
  • Jacketing piles of bridge Mon, 6 Oct 2003 17:55:48 -0600 (MDT)
  • Seminars on concrete reparation Thu, 9 Oct 2003 19:32:40 -0600 (MDT)
  • Interaction diagram for a pile Tue, 18 Nov 2003 06:42:43 -0700 (MST)
  • Interaction diagram Mon, 24 Nov 2003 18:08:18 -0700 (MST)

• Keith De Lapp
  • RE: Residential Construction Performance Guidelines (WAS: Q: Flatness Tolerances for Residential Slab) Mon, 27 Oct 2003 11:29:06 -0700 (MST)
  • Test Mon, 27 Oct 2003 12:35:54 -0700 (MST)
  • RE: SE Tests Thu, 6 Nov 2003 18:34:58 -0700 (MST)
  • SE Tests Fri, 7 Nov 2003 01:58:42 -0700 (MST)
  • SE Test Fri, 7 Nov 2003 13:04:08 -0700 (MST)
  • RE: SE Test Fri, 7 Nov 2003 15:41:15 -0700 (MST)
  • RE: Holiday Differences [humor] Mon, 22 Dec 2003 16:15:43 -0700 (MST)
  • RE: NYTimes.com Article: Halliburton Contracts in Iraq: The Struggle to Manage Costs Tue, 30 Dec 2003 14:09:11 -0700 (MST)
  • RE: Philosophical Differences Tue, 30 Dec 2003 14:12:34 -0700 (MST)

• Ken Green
  • automated response Sat, 4 Oct 2003 01:21:03 -0600 (MDT)

• ken kirkland
  • RE: Tapered Stem Wall using Enercal Wed, 1 Oct 2003 11:30:01 -0600 (MDT)
  • Reinforcing vs welded wire fabric Wed, 15 Oct 2003 17:41:20 -0600 (MDT)
  • Column located on 4" existing concrete slab Wed, 29 Oct 2003 17:38:40 -0700 (MST)
  • Re: Slab on Ground Joint Spacings Fri, 21 Nov 2003 17:01:40 -0700 (MST)

• Ken Peoples
  • k's in LRFD Third Edition Fri, 17 Oct 2003 13:48:33 -0600 (MDT)
  • off topic: AutoCAD drawing presentation in powerpoint Wed, 22 Oct 2003 05:40:38 -0600 (MDT)
  • Lynn S. Beedle Fri, 31 Oct 2003 08:27:23 -0700 (MST)
  • Re: Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 14:38:21 -0700 (MST)
  • Steel-Detail: cost of field drilling holes Mon, 17 Nov 2003 14:40:27 -0700 (MST)
  • Re: cost of field drilling holes Tue, 18 Nov 2003 05:54:17 -0700 (MST)

• Kent Carlson
  • RE: W Shape question Thu, 16 Oct 2003 10:42:54 -0600 (MDT)

• Kestner, James W.
  • RE: Slab with Concrete Blocks Thu, 2 Oct 2003 07:32:11 -0600 (MDT)
  • Light Gauge Steel Stud Backup for brick Fri, 3 Oct 2003 13:47:01 -0600 (MDT)
  • RE: Plan review? Fri, 17 Oct 2003 08:23:45 -0600 (MDT)
  • Web Plates on Col. Splices Tue, 21 Oct 2003 08:26:36 -0600 (MDT)
  • RE: Masonry lap splice Tue, 28 Oct 2003 08:23:54 -0700 (MST)
  • RE: Shear tranfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 15:44:26 -0700 (MST)
  • RE: Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 09:14:00 -0700 (MST)
  • RE: Connections Tue, 2 Dec 2003 10:38:08 -0700 (MST)
  • RE: Unbraced Length Wed, 10 Dec 2003 10:17:07 -0700 (MST)
  • RE:Wood Truss Bracing Thu, 11 Dec 2003 16:17:29 -0700 (MST)

• Kevin Below
  • Minimum reinforcement for structural integrity at slab-column connections Tue, 23 Dec 2003 15:36:44 -0700 (MST)
  • RE: Minimum reinforcement for structural integrity at slab-column connections Tue, 30 Dec 2003 14:02:39 -0700 (MST)

• Kipp . A . Martin
  • Rigid Diaphragm for a L Shaped Building Mon, 13 Oct 2003 09:10:24 -0600 (MDT)
  • FEMA 350 Tue, 2 Dec 2003 13:05:02 -0700 (MST)

• Larry_Reynolds
  • RE: Seismic Load Factors Mon, 20 Oct 2003 17:13:43 -0600 (MDT)
  • Beam Bearing Stiffeners Wed, 29 Oct 2003 10:00:22 -0700 (MST)
  • Conodeck Joists Thu, 30 Oct 2003 08:19:29 -0700 (MST)
  • RE: Aluminum Wed, 5 Nov 2003 11:13:32 -0700 (MST)
  • RE: Aluminum Mon, 10 Nov 2003 07:46:35 -0700 (MST)
  • RE: Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 11:20:20 -0700 (MST)
  • RE: Connections Wed, 26 Nov 2003 12:40:20 -0700 (MST)
  • RE: Schooling (was Connections) Wed, 3 Dec 2003 10:04:28 -0700 (MST)
  • RE: Seismic design of walls Thu, 4 Dec 2003 07:45:08 -0700 (MST)
  • RE: Plated wood truss failures? Thu, 4 Dec 2003 14:13:14 -0700 (MST)

• Leaper, Matthew R.
  • America for Americans - A recent graduates perspective on the implications of outsourcing Fri, 26 Dec 2003 10:47:29 -0700 (MST)

• Lester Unger
  • Thickened Floor Slabs Tue, 7 Oct 2003 09:39:59 -0600 (MDT)
  • Thickened Floor Slabs 2 Tue, 7 Oct 2003 12:15:37 -0600 (MDT)

• Lowen, Dave
  • RE: Connections Mon, 1 Dec 2003 11:10:36 -0700 (MST)
  • Cedar Thu, 4 Dec 2003 10:38:13 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:19:05 -0700 (MST)
  • RE: Schooling (was Connections) Fri, 5 Dec 2003 12:01:57 -0700 (MST)
  • RE: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 11:23:10 -0700 (MST)
  • RE: oh canada! Fri, 12 Dec 2003 07:51:36 -0700 (MST)
  • RE: Ontario Pre-Start Health & Safety Review - storage racking Mon, 15 Dec 2003 05:45:07 -0700 (MST)
  • RE: Ontario Pre-Start Health & Safety Review - storage racking Mon, 15 Dec 2003 07:18:58 -0700 (MST)
  • RE: oh canada! Wed, 17 Dec 2003 03:20:26 -0700 (MST)

• lrhauer
  • URM Building per UCBC Tue, 25 Nov 2003 16:17:34 -0700 (MST)
  • Re: Paper Space - was: Engineering Education Reply to Bill P. from Gerard Sat, 6 Dec 2003 12:04:04 -0700 (MST)
  • Fw: Re: Paper Space - was: Engineering Education Reply to Bill P. from Gerard Sat, 6 Dec 2003 16:57:51 -0700 (MST)
  • Re: Raymond Step Tapered Piles Tue, 9 Dec 2003 08:03:53 -0700 (MST)

• Lucas Jolly
  • RE: fema 356 foundation acceptability Mon, 10 Nov 2003 10:24:26 -0700 (MST)

• M. David Finley, P.E.
  • Re: SICK PROFESSION Mon, 10 Nov 2003 10:03:38 -0700 (MST)
  • Off Topic? NYC Subway Tue, 11 Nov 2003 13:05:15 -0700 (MST)
  • Galvanized Rebar Mon, 17 Nov 2003 05:58:19 -0700 (MST)
  • Re: Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 14:46:38 -0700 (MST)
  • Re: Galvanized Rebar Tue, 18 Nov 2003 07:16:11 -0700 (MST)
  • Re: Tall light pole foundation Tue, 2 Dec 2003 05:27:52 -0700 (MST)
  • Re: Florida: High Velocity Hurricane Zone Wed, 10 Dec 2003 13:41:43 -0700 (MST)
  • Re: Misc Opinions Tue, 30 Dec 2003 08:45:35 -0700 (MST)

• Majid Sarraf
  • RE: Interaction diagram - USING XTRACT Mon, 24 Nov 2003 23:59:25 -0700 (MST)

• Marc
  • sill plate cupping/lifting? Thu, 6 Nov 2003 10:37:26 -0700 (MST)

• Mark D. Anderson PE
  • Re: E/O Insurance Tue, 18 Nov 2003 19:25:55 -0700 (MST)
  • Re: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 23:31:07 -0700 (MST)

• Mark D. Baker
  • virus alert Wed, 17 Dec 2003 09:54:04 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Thu, 18 Dec 2003 17:56:19 -0700 (MST)

• mark francois
  • Re: Misc Opinions Tue, 30 Dec 2003 06:42:33 -0700 (MST)
  • Re: Misc Opinions Tue, 30 Dec 2003 10:59:07 -0700 (MST)

• Mark Geoghegan
  • RE: Rebar Strengths Wed, 22 Oct 2003 14:29:17 -0600 (MDT)
  • RE: Rock Anchors - any recommendations Tue, 18 Nov 2003 21:48:58 -0700 (MST)
  • RE: Rock Anchors - any recommendations Tue, 18 Nov 2003 22:34:33 -0700 (MST)
  • RE: SE job opportunities - Chicago Tue, 25 Nov 2003 19:56:03 -0700 (MST)
  • RE: Ram Concept Tue, 25 Nov 2003 20:00:09 -0700 (MST)

• Mark Gilligan
  • RE: Offset Moment Connection Mon, 6 Oct 2003 02:24:12 -0600 (MDT)
  • RE: question on K factors and P-delta analysis Tue, 7 Oct 2003 09:17:53 -0600 (MDT)
  • RE: Two-way flat plate moment frame question Wed, 22 Oct 2003 01:26:43 -0600 (MDT)
  • RE: A706 bar vs. A615 bar Fri, 14 Nov 2003 10:17:39 -0700 (MST)
  • RE: Rock Anchors - any recommendations Sun, 16 Nov 2003 00:24:15 -0700 (MST)
  • Re: Joints in Slabs on Ground Wed, 19 Nov 2003 00:03:57 -0700 (MST)
  • Re: Connections Fri, 28 Nov 2003 22:36:49 -0700 (MST)
  • Re: Connections Fri, 28 Nov 2003 23:33:22 -0700 (MST)
  • RE: Structural Drafting course (was RE: Connections) Tue, 2 Dec 2003 01:23:24 -0700 (MST)
  • RE: Fillet Weld Reinforcement of Flare Bevel Groove Welds (Specifically HSS Connections) Fri, 19 Dec 2003 00:32:09 -0700 (MST)

• Matthew Stuart
  • Test Mon, 20 Oct 2003 06:15:32 -0600 (MDT)
  • Test 2 Mon, 20 Oct 2003 06:31:28 -0600 (MDT)
  • IS IT JUST ME OR ARE OTHERS GETTING EMAILS WITH NO TEXT IN THEM OTHER THAN BELOW Wed, 22 Oct 2003 08:00:00 -0600 (MDT)
  • Atlantic City Garage Collapse Thu, 30 Oct 2003 17:02:14 -0700 (MST)
  • [no subject] Fri, 31 Oct 2003 05:38:10 -0700 (MST)
  • Tropicana Garage Collapse Fri, 31 Oct 2003 11:35:37 -0700 (MST)
  • Fwd: FW: Building Code Complexity Fri, 7 Nov 2003 04:47:28 -0700 (MST)
  • Fwd: FW: Seals and signatures Fri, 7 Nov 2003 04:48:21 -0700 (MST)
  • Fwd: FW: Timber pile uplift anchorage... Tue, 11 Nov 2003 13:42:03 -0700 (MST)
  • Fwd: FW: foreigners... gotta love them Wed, 12 Nov 2003 12:43:40 -0700 (MST)
  • RE: Uplift on Belled Drilled Pier Fri, 14 Nov 2003 12:13:51 -0700 (MST)
  • Re: Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 12:21:58 -0700 (MST)
  • Re: Creosote Ban? Mon, 8 Dec 2003 07:36:30 -0700 (MST)
  • RE: Need references for an Atlanta-area engineers Thu, 11 Dec 2003 13:02:38 -0700 (MST)
  • Techincal Peer Review Survey Wed, 31 Dec 2003 12:36:49 -0700 (MST)

• MBREngineering
  • Re: Fibermesh Topping Slab Thu, 2 Oct 2003 11:59:42 -0600 (MDT)
  • Re: Thickened Floor Slabs Tue, 7 Oct 2003 10:23:32 -0600 (MDT)
  • Pipe Analysis Thu, 9 Oct 2003 16:56:31 -0600 (MDT)

• mc . upadhyay
  • Effective length of columns Thu, 4 Dec 2003 22:06:53 -0700 (MST)
  • Side Pressure on Foundation Mon, 8 Dec 2003 22:07:09 -0700 (MST)

• Melnick, Scott
  • aisc revises professional membership dues structure Wed, 1 Oct 2003 14:35:10 -0600 (MDT)
  • blast and progressive collapse Fri, 24 Oct 2003 12:22:12 -0600 (MDT)
  • RE: blast and progressive collapse Mon, 27 Oct 2003 09:57:13 -0700 (MST)

• Meyer, Albert
  • RE: AASHTO Pedestrian Bridge Railing Requirements Tue, 25 Nov 2003 08:46:11 -0700 (MST)

• Meyer, Jonathan
  • RE: Q: Flatness Tolerances for Residential Slab Fri, 17 Oct 2003 06:13:30 -0600 (MDT)
  • Re: CA SE / SE2 Tue, 4 Nov 2003 07:37:03 -0700 (MST)

• Michael Bryson
  • RE: FEMA 310 Replacement? Thu, 2 Oct 2003 14:47:43 -0600 (MDT)
  • Butt-welding a gap Thu, 2 Oct 2003 17:27:19 -0600 (MDT)
  • RE: Butt-welding a gap Fri, 3 Oct 2003 10:16:38 -0600 (MDT)
  • RE: Butt-welding a gap Fri, 3 Oct 2003 10:23:04 -0600 (MDT)
  • RE: Contact loads from moving loads Tue, 7 Oct 2003 21:19:56 -0600 (MDT)
  • RE: Plan Check Fri, 17 Oct 2003 13:08:09 -0600 (MDT)
  • RE: Glulam Roof Girders in a Tilt-Up Wed, 29 Oct 2003 08:15:47 -0700 (MST)
  • RE: Plated wood truss failures? Thu, 4 Dec 2003 13:31:13 -0700 (MST)
  • RE: Acceptable Level of Overstress Thu, 4 Dec 2003 14:39:12 -0700 (MST)

• Michael L. Hemstad
  • Off topic Wed, 1 Oct 2003 10:25:29 -0600 (MDT)
  • Rebar breaking Tue, 7 Oct 2003 09:57:42 -0600 (MDT)
  • Seismic Load Factors Mon, 20 Oct 2003 15:39:19 -0600 (MDT)
  • Seismic Load Factors Tue, 21 Oct 2003 12:58:23 -0600 (MDT)
  • Old concrete masonry Thu, 30 Oct 2003 13:33:01 -0700 (MST)
  • CA SE / SE2 Mon, 3 Nov 2003 12:56:58 -0700 (MST)
  • SE Tests Thu, 6 Nov 2003 11:41:46 -0700 (MST)
  • SICK PROFESSION Tue, 11 Nov 2003 12:17:04 -0700 (MST)
  • Interaction Diagram Tue, 25 Nov 2003 10:41:49 -0700 (MST)
  • Slender CMU Wall Design Mon, 1 Dec 2003 10:30:09 -0700 (MST)
  • Engineering Education Tue, 2 Dec 2003 08:04:59 -0700 (MST)
  • Seismic design of walls Wed, 3 Dec 2003 15:28:58 -0700 (MST)
  • Residential truss bracing Wed, 10 Dec 2003 09:04:23 -0700 (MST)
  • Unbraced Length Thu, 11 Dec 2003 12:22:31 -0700 (MST)

• Michel Blangy
  • RE: frost heave Mon, 13 Oct 2003 18:13:55 -0600 (MDT)
  • RE: frost heave Mon, 13 Oct 2003 18:17:45 -0600 (MDT)

• Mike Jones
  • Re: one small request regarding bandwidth of digest Wed, 1 Oct 2003 09:37:10 -0600 (MDT)
  • Re: Mold Remediation Wed, 8 Oct 2003 13:48:34 -0600 (MDT)
  • testing n/t Wed, 15 Oct 2003 13:57:38 -0600 (MDT)
  • Hyatt Regency Collapse (was:E: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 07:14:15 -0600 (MDT)
  • Re: Masonry lap splice Tue, 28 Oct 2003 08:22:44 -0700 (MST)
  • Re: Aluminum Tue, 4 Nov 2003 12:48:14 -0700 (MST)
  • Re: RE: pre engineered metal building detailing Tue, 11 Nov 2003 07:25:26 -0700 (MST)
  • Timber pile uplift anchorage... Tue, 11 Nov 2003 12:31:40 -0700 (MST)
  • Re: [spam] Crane runway bumpers Wed, 19 Nov 2003 07:42:36 -0700 (MST)
  • Re: Archive Wind Load Help Wed, 19 Nov 2003 13:22:33 -0700 (MST)
  • Re ATS-109 Fri, 21 Nov 2003 10:45:24 -0700 (MST)
  • Re: RE: virus alert Wed, 17 Dec 2003 11:01:20 -0700 (MST)

• Mike Murphy
  • RE: Rebar breaking Wed, 8 Oct 2003 11:16:26 -0600 (MDT)

• Mike O'Brien
  • posting live load Fri, 10 Oct 2003 08:43:39 -0600 (MDT)
  • tie wires for ceilings Tue, 21 Oct 2003 13:50:21 -0600 (MDT)
  • RE: steel formdeck as shearwall? Mon, 3 Nov 2003 07:47:33 -0700 (MST)
  • No more A35F Thu, 20 Nov 2003 09:08:59 -0700 (MST)

• MJSLAYSMAN
  • Re: Special Inspection Fri, 31 Oct 2003 10:05:24 -0700 (MST)
  • Re: Special Inspection Mon, 3 Nov 2003 07:44:07 -0700 (MST)

• Mlcse
  • Re: IRAN QUAKE/can we discuss ths? Tue, 30 Dec 2003 22:48:29 -0700 (MST)

• Munoz, Pedro
  • ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 09:47:20 -0700 (MST)

• Neil Moore
  • Re: "Lamella" Wood Roof Construction Thu, 6 Nov 2003 20:54:51 -0700 (MST)
  • Re: plywood shear wall deflection Tue, 18 Nov 2003 10:34:32 -0700 (MST)
  • RE: Structural Drafting course (was RE: Connections) Tue, 2 Dec 2003 07:40:08 -0700 (MST)
  • Re: Structural Drafting course (was RE: Connections) Tue, 2 Dec 2003 10:21:37 -0700 (MST)
  • RE: Structural Drafting course (was RE: Connections) Tue, 2 Dec 2003 23:23:10 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:11:48 -0700 (MST)
  • Re: Raymond Step Tapered Piles Mon, 8 Dec 2003 20:49:09 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential - Scott Tue, 23 Dec 2003 15:57:58 -0700 (MST)
  • Re: Outsourcing/world politics/meaning of life Wed, 24 Dec 2003 08:18:16 -0700 (MST)

• Nels Roselund, SE
  • Re: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 11:11:20 -0600 (MDT)
  • FEMA 310 Replacement? Thu, 2 Oct 2003 14:38:23 -0600 (MDT)
  • Re: Light Gauge Steel Stud Backup for brick Fri, 3 Oct 2003 19:15:07 -0600 (MDT)
  • Re: Water Proof Membrane Sat, 11 Oct 2003 13:25:56 -0600 (MDT)
  • Re: Mold Remediation Sat, 11 Oct 2003 15:17:56 -0600 (MDT)
  • NFPA Code and ICBO Evaluation Service Reports Mon, 13 Oct 2003 19:06:10 -0600 (MDT)
  • Re: Is 'List Server' up or down Wed, 15 Oct 2003 19:46:10 -0600 (MDT)
  • Re: Sat, 18 Oct 2003 09:52:19 -0600 (MDT)
  • Re: Concrete Text Books Wed, 22 Oct 2003 09:21:47 -0600 (MDT)
  • Re: Horizontal bracing seismic provisions (AISC or IBC) Thu, 23 Oct 2003 09:47:37 -0600 (MDT)
  • Nail embedments Mon, 27 Oct 2003 17:22:29 -0700 (MST)
  • Staples for Shear-resisting Panels [was: Nail embedments] Tue, 28 Oct 2003 12:53:28 -0700 (MST)
  • Re: Glulam Roof Girders in a Tilt-Up Wed, 29 Oct 2003 10:16:48 -0700 (MST)
  • Re: "Lamella" Wood Roof Construction Thu, 6 Nov 2003 18:43:48 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Sun, 16 Nov 2003 10:08:58 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Mon, 17 Nov 2003 08:26:02 -0700 (MST)
  • Re: 1930's Poured in Place Concrete Building Thu, 20 Nov 2003 10:42:32 -0700 (MST)
  • Re: Harlen Metal Products Product info Mon, 24 Nov 2003 09:18:23 -0700 (MST)
  • Re: URM Building per UCBC Wed, 26 Nov 2003 10:17:29 -0700 (MST)
  • Re: Tell me what's really on your mind Sat, 13 Dec 2003 23:16:12 -0700 (MST)
  • Re: Upgrading unreinforced quarry stone masonry building ... Sun, 14 Dec 2003 23:39:47 -0700 (MST)
  • Re: sound transmission, treated wood Thu, 18 Dec 2003 15:03:18 -0700 (MST)
  • Re: sound transmission, treated wood Thu, 18 Dec 2003 15:06:31 -0700 (MST)
  • Re: IRAN QUAKE/can we discuss ths? Tue, 30 Dec 2003 22:34:36 -0700 (MST)

• Nitin Christopher
  • RE: Thickened Floor Slabs Tue, 7 Oct 2003 10:27:01 -0600 (MDT)
  • Rebar Tension Lap Splice in frame columns Mon, 3 Nov 2003 11:33:48 -0700 (MST)
  • CBC 1921.4 Frame Members Design Mon, 3 Nov 2003 12:33:03 -0700 (MST)

• Nuttall, Davin J.
  • RE: Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 10:03:14 -0700 (MST)
  • RE: Plated wood truss failures? Thu, 4 Dec 2003 12:09:53 -0700 (MST)
  • RE: Sheathing Requirements Tue, 16 Dec 2003 13:20:32 -0700 (MST)

• ozturk_ozgur
  • LRFD Live L application on simple span bridge Thu, 16 Oct 2003 05:34:30 -0600 (MDT)

• paag faag
  • 2U Mon, 3 Nov 2003 23:20:15 -0700 (MST)
  • 4u2c Sun, 9 Nov 2003 03:40:37 -0700 (MST)
  • 4U2C Sun, 9 Nov 2003 03:53:15 -0700 (MST)
  • [Freedom-S] 4U2C Wed, 12 Nov 2003 03:52:16 -0700 (MST)

• Padmanabhan Rajendran
  • RE: Uplift on Belled Drilled Pier Fri, 14 Nov 2003 13:29:56 -0700 (MST)
  • Re: Internal Wind Pressure for Partially Enclosed Bldg. Wed, 19 Nov 2003 13:57:12 -0700 (MST)
  • Re: Happy Thanksgiving, SEAINT Wed, 26 Nov 2003 10:32:51 -0700 (MST)
  • Re: Effective length of columns Fri, 5 Dec 2003 06:48:08 -0700 (MST)
  • Re: Unbraced Length Wed, 10 Dec 2003 11:15:07 -0700 (MST)
  • Re: Liquefaction and Slabs-on-grade Tue, 16 Dec 2003 14:51:26 -0700 (MST)
  • Re: Liquefaction and Slabs-on-grade Wed, 17 Dec 2003 07:13:38 -0700 (MST)
  • RE: virus alert Wed, 17 Dec 2003 10:48:04 -0700 (MST)
  • RE: virus alert Wed, 17 Dec 2003 12:42:20 -0700 (MST)
  • Spam from bcinc Sun, 21 Dec 2003 07:17:20 -0700 (MST)
  • Re: Philosophical Differences Mon, 29 Dec 2003 13:36:11 -0700 (MST)
  • Re: Misc Opinions Tue, 30 Dec 2003 06:20:42 -0700 (MST)
  • Re: Old ASTMS Tue, 30 Dec 2003 10:38:44 -0700 (MST)

• Pankaj Gupta
  • Fw: [offtopic] Article I through IX Fri, 19 Dec 2003 09:05:38 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Fri, 19 Dec 2003 10:34:49 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Sat, 20 Dec 2003 10:28:03 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Mon, 22 Dec 2003 02:56:00 -0700 (MST)
  • Re: Thoughts on Outsourcing Mon, 22 Dec 2003 08:12:44 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential - Scott Tue, 23 Dec 2003 02:43:50 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential - Scott Tue, 23 Dec 2003 09:05:50 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Tue, 23 Dec 2003 23:45:47 -0700 (MST)
  • Re: IRAN QUAKE/can we discuss ths? Sat, 27 Dec 2003 03:29:37 -0700 (MST)
  • Re: Paso Robles and other earthquakes 2 Tue, 30 Dec 2003 19:43:22 -0700 (MST)

• Pat Clark
  • frost heave Mon, 13 Oct 2003 15:08:40 -0600 (MDT)
  • RE: frost heave Mon, 13 Oct 2003 17:03:30 -0600 (MDT)
  • RE: SE Tests Tue, 4 Nov 2003 12:37:54 -0700 (MST)
  • RE: out of plane anchorage Question Tue, 11 Nov 2003 17:29:09 -0700 (MST)
  • pool wall design Thu, 13 Nov 2003 11:28:32 -0700 (MST)
  • RE: pool wall design Thu, 13 Nov 2003 14:52:23 -0700 (MST)
  • RE: 2x2x3/16 plate washers, round washers ok? Mon, 1 Dec 2003 15:04:33 -0700 (MST)
  • Structural observation Wed, 24 Dec 2003 10:54:48 -0700 (MST)

• Patrick Rodgers
  • Re: Glulam Roof Girders in a Tilt-Up Tue, 28 Oct 2003 21:29:51 -0700 (MST)
  • Re: "Lamella" Wood Roof Construction Thu, 6 Nov 2003 22:32:09 -0700 (MST)
  • Re: Structural Drafting course (was RE: Connections) Tue, 2 Dec 2003 22:08:00 -0700 (MST)
  • Paso Robles Earthquake Wed, 24 Dec 2003 20:07:09 -0700 (MST)

• Paul Blomberg
  • RE: Flatness Tolerances for Residential Slab Fri, 17 Oct 2003 15:16:06 -0600 (MDT)
  • 30" TJ50 Capacity Thu, 4 Dec 2003 12:24:16 -0700 (MST)
  • National Seismic Hazard Mapping Project Mon, 8 Dec 2003 07:50:57 -0700 (MST)
  • Re: Minimum Design Loads Tue, 9 Dec 2003 07:46:51 -0700 (MST)

• Paul Feather
  • Re: Proposed roof design Wed, 1 Oct 2003 14:59:35 -0600 (MDT)
  • Plan Check (was Re: Rigid Wood Diaphragm?) Mon, 13 Oct 2003 09:56:38 -0600 (MDT)
  • Re: Plan Check (was Re: Rigid Wood Diaphragm?) Wed, 15 Oct 2003 18:50:44 -0600 (MDT)
  • Re: Plan Check Fri, 31 Oct 2003 10:06:40 -0700 (MST)
  • Re: Special Inspection Fri, 31 Oct 2003 11:46:12 -0700 (MST)
  • Re: SE Tests Tue, 4 Nov 2003 09:35:20 -0700 (MST)
  • Re: SE Tests Tue, 4 Nov 2003 11:53:06 -0700 (MST)
  • Re: SE Tests Tue, 4 Nov 2003 13:43:09 -0700 (MST)
  • Re: Regional permitting differences - calculations Thu, 6 Nov 2003 11:33:41 -0700 (MST)
  • Re: Tests, etc. Thu, 6 Nov 2003 13:37:40 -0700 (MST)
  • Re: Steel Stair Treads Thu, 6 Nov 2003 14:17:04 -0700 (MST)
  • Re: Seals and signatures Thu, 6 Nov 2003 15:10:20 -0700 (MST)
  • Re: out of plane anchorage Question Tue, 11 Nov 2003 16:58:39 -0700 (MST)
  • Re: out of plane anchorage Question Tue, 11 Nov 2003 18:47:58 -0700 (MST)
  • Re: out of plane anchorage Question Wed, 12 Nov 2003 09:21:50 -0700 (MST)
  • Re: Shear tranfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 17:27:50 -0700 (MST)
  • Re: Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 17:51:43 -0700 (MST)
  • Re: out of plane anchorage Question Wed, 12 Nov 2003 18:09:41 -0700 (MST)
  • Re: Near-Source Factor for non-structural components Fri, 14 Nov 2003 16:57:58 -0700 (MST)
  • Welding - Periodic Inspection Fri, 14 Nov 2003 17:03:31 -0700 (MST)
  • Re: Steel-Detail: cost of field drilling holes Mon, 17 Nov 2003 15:08:41 -0700 (MST)
  • Re: E/O Insurance Fri, 21 Nov 2003 09:19:08 -0700 (MST)
  • Re: Shear wall Beam Design Tue, 25 Nov 2003 13:44:24 -0700 (MST)
  • Re: URM Building per UCBC Wed, 26 Nov 2003 10:46:58 -0700 (MST)
  • Re: Structural Drafting course (was RE: Connections) Tue, 2 Dec 2003 09:59:29 -0700 (MST)
  • Re: Schooling (was Connections) Fri, 5 Dec 2003 10:18:32 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential - Scott Tue, 23 Dec 2003 10:43:02 -0700 (MST)
  • Re: Fee for Custom Residence Wed, 24 Dec 2003 09:33:30 -0700 (MST)
  • Re: IRAN QUAKE/can we discuss ths? Sun, 28 Dec 2003 18:28:18 -0700 (MST)
  • Re: IRAN QUAKE/can we discuss ths? Wed, 31 Dec 2003 10:17:58 -0700 (MST)
  • Re: IRAN QUAKE/can we discuss ths? Wed, 31 Dec 2003 10:20:07 -0700 (MST)

• Paul Ransom
  • Re: Offset Moment Connection Mon, 6 Oct 2003 08:51:15 -0600 (MDT)
  • Re: AISC Appd'x 'B' - Effective width Mon, 6 Oct 2003 09:01:56 -0600 (MDT)
  • Re: Contact loads from moving loads Fri, 10 Oct 2003 07:20:31 -0600 (MDT)
  • Wanted: Old Pre-eng building standards Drawings and Books Sun, 19 Oct 2003 16:20:23 -0600 (MDT)
  • Re: Bolt question Tue, 28 Oct 2003 08:43:43 -0700 (MST)
  • Re: Building Code Complexity Sun, 9 Nov 2003 14:43:56 -0700 (MST)
  • Re: Canandian Concrete Code Question Sun, 9 Nov 2003 14:44:15 -0700 (MST)
  • RE: pool wall design Sun, 16 Nov 2003 07:57:47 -0700 (MST)
  • Re: structural steel bolted connection question Thu, 20 Nov 2003 08:18:58 -0700 (MST)
  • Re: Bolt edge distance-steel Thu, 20 Nov 2003 08:20:44 -0700 (MST)
  • Re: Slender CMU Wall Design Sun, 30 Nov 2003 10:16:44 -0700 (MST)
  • Spec'ing PEMBs [was Lateral Deflection of Masonry Wall Building] Tue, 2 Dec 2003 08:25:14 -0700 (MST)
  • Spec'ing PEMBs [was Slender CMU Wall Design] Tue, 2 Dec 2003 08:26:18 -0700 (MST)
  • Re: Spec'ing PEMBs [was Lateral Deflection of Masonry Wall Building] Thu, 4 Dec 2003 08:33:13 -0700 (MST)
  • Re: Spec'ing PEMBs [was Slender CMU Wall Design] Thu, 4 Dec 2003 08:33:53 -0700 (MST)
  • Re: Ontario Pre-Start Health & Safety Review - storage racking Sat, 13 Dec 2003 10:47:57 -0700 (MST)
  • Re: oh canada! Sat, 13 Dec 2003 10:49:42 -0700 (MST)
  • Re: Theatre Roof Sat, 13 Dec 2003 10:50:39 -0700 (MST)
  • Re: Vibration design practice for condominiums Thu, 18 Dec 2003 01:14:07 -0700 (MST)
  • Re: Theatre Roof Thu, 18 Dec 2003 01:15:36 -0700 (MST)
  • Re: oh canada! Thu, 18 Dec 2003 01:18:10 -0700 (MST)

• Peter James
  • RE: Plan Check Fri, 17 Oct 2003 11:26:53 -0600 (MDT)
  • RE: Rebar Strengths Wed, 22 Oct 2003 14:37:41 -0600 (MDT)
  • Ontario Pre-Start Health & Safety Review - storage racking Thu, 11 Dec 2003 11:45:47 -0700 (MST)
  • RE: Ontario Pre-Start Health & Safety Review - storage racking Mon, 15 Dec 2003 08:19:19 -0700 (MST)

• PFFEI
  • double nut anchor bolts Mon, 27 Oct 2003 14:59:30 -0700 (MST)

• pugliesi
  • Structural Engineers on TV Thu, 2 Oct 2003 12:09:01 -0600 (MDT)
  • Ray Pugliesi/Degenkolb is out of the office. Fri, 26 Dec 2003 01:57:43 -0700 (MST)

• RainCat1
  • Spain Code/ NCSE-94 Mon, 24 Nov 2003 16:24:41 -0700 (MST)

• Rand Holtham, P.E.
  • Fw: Lateral Deflection of Masonry Wall Building Thu, 11 Dec 2003 06:31:18 -0700 (MST)
  • Residential Truss Bracing Thu, 11 Dec 2003 06:49:09 -0700 (MST)
  • Re: 2x4 Wood Diaphragm Capacity Tue, 23 Dec 2003 08:13:41 -0700 (MST)
  • Re: Masonry Structural Notes and Specifications Tue, 23 Dec 2003 10:20:59 -0700 (MST)
  • Re: Fee for Custom Residence Fri, 26 Dec 2003 07:34:45 -0700 (MST)

• Rand Holtham, P.E., Sigma Engineers
  • Mobile Crane Load on Concrete Flume/Bridge Thu, 13 Nov 2003 14:44:01 -0700 (MST)

• Randall H. Collier
  • RE: Philosophical Differences Tue, 30 Dec 2003 09:01:14 -0700 (MST)

• Randy Diviney
  • RE: TEST Wed, 15 Oct 2003 14:16:34 -0600 (MDT)

• Rangaswamy, Aswin
  • Job Opening - Jr. Engineer Thu, 16 Oct 2003 09:29:22 -0600 (MDT)

• Rangelow, Peter Dr. HTC/DE/FRA
  • Upgrading unreinforced quarry stone masonry building ... Sun, 14 Dec 2003 04:08:46 -0700 (MST)

• Ravi Kumar
  • ANALYSIS PROCEDURE Sun, 19 Oct 2003 22:33:33 -0600 (MDT)
  • ANALYSIS PROCEDURE Sun, 19 Oct 2003 22:35:31 -0600 (MDT)

• Ray Pixley
  • RE: SICK PROFESSION Tue, 11 Nov 2003 13:33:14 -0700 (MST)
  • Re: Off Topic? NYC Subway Tue, 11 Nov 2003 13:40:39 -0700 (MST)
  • Re: Old ASTMS Wed, 31 Dec 2003 07:24:37 -0700 (MST)

• Ray Shreenan
  • Wood Beam Torsion Tue, 7 Oct 2003 13:13:22 -0600 (MDT)

• Rbengrguy
  • RE: SICK PROFESSION Sat, 8 Nov 2003 16:31:49 -0700 (MST)
  • Re: Former professor leaves legacy - The Brown and White Mon, 10 Nov 2003 18:22:25 -0700 (MST)
  • Sick Profession Sat, 15 Nov 2003 14:34:04 -0700 (MST)
  • Re: H-1B conspiracists Mon, 8 Dec 2003 19:20:22 -0700 (MST)
  • Re: more people who aren't going to take it anymore Wed, 17 Dec 2003 04:27:21 -0700 (MST)
  • Re: Failed Outsourcing Sat, 20 Dec 2003 07:15:07 -0700 (MST)
  • Re: What can I do about it? (Onshoring and Offshoring) Sat, 20 Dec 2003 07:21:57 -0700 (MST)
  • Re: H-1B lawsuit Sat, 20 Dec 2003 07:30:15 -0700 (MST)
  • Re: Offshoring >> Top 10 risks Mon, 22 Dec 2003 04:23:12 -0700 (MST)

• Regis King
  • Closure Pour versus Construction Joint Mon, 15 Dec 2003 17:19:20 -0700 (MST)

• Reza Dashti Asl
  • RE: Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 14:16:31 -0600 (MDT)
  • RE: Strap Bracing for Metal Stud Wall Fri, 3 Oct 2003 12:52:48 -0600 (MDT)
  • RE: question on K factors and P-delta analysis Tue, 7 Oct 2003 13:01:10 -0600 (MDT)
  • Re: Residential Roof Diaphragms Wed, 29 Oct 2003 11:32:12 -0700 (MST)

• Richard Hess
  • CA IBC Thu, 11 Dec 2003 15:34:46 -0700 (MST)
  • Re: Paso Robles and other earthquakes 1 Mon, 29 Dec 2003 15:37:50 -0700 (MST)

• richard lewis
  • AISC Appd'x 'B' - Effective width Wed, 1 Oct 2003 08:06:09 -0600 (MDT)
  • Strap Bracing for Metal Stud Wall Thu, 2 Oct 2003 09:40:37 -0600 (MDT)
  • Posting Live Load Wed, 8 Oct 2003 12:40:01 -0600 (MDT)
  • Mold Remediation Wed, 8 Oct 2003 12:40:33 -0600 (MDT)
  • Re: Posting Live Load Thu, 9 Oct 2003 07:43:15 -0600 (MDT)
  • Water Proof Membrane Fri, 10 Oct 2003 14:14:36 -0600 (MDT)
  • Re: Water Proof Membrane Mon, 13 Oct 2003 10:48:43 -0600 (MDT)
  • Re: Water Proof Membrane Fri, 17 Oct 2003 12:27:42 -0600 (MDT)
  • Foundation Waterproofing Thu, 23 Oct 2003 15:04:39 -0600 (MDT)
  • Steel Stair Treads Thu, 6 Nov 2003 10:25:17 -0700 (MST)
  • Uplift on Belled Drilled Pier Thu, 13 Nov 2003 09:17:44 -0700 (MST)
  • Re: Uplift on Belled Drilled Pier Fri, 14 Nov 2003 09:53:11 -0700 (MST)
  • Archive Wind Load Help Wed, 19 Nov 2003 11:25:27 -0700 (MST)
  • Internal Wind Pressure for Partially Enclosed Bldg. Wed, 19 Nov 2003 13:31:38 -0700 (MST)
  • Designing Masonry to Span Horizontally Tue, 9 Dec 2003 08:49:52 -0700 (MST)

• Richard M. Beldyk, P.E., CPEng
  • Look for a CA SE Fri, 17 Oct 2003 12:42:31 -0600 (MDT)
  • Re: off topic: AutoCAD drawing presentation in powerpoint Wed, 22 Oct 2003 06:12:46 -0600 (MDT)

• Rick Burch
  • Horizontal bracing seismic provisions (AISC or IBC) Wed, 22 Oct 2003 20:32:09 -0600 (MDT)
  • Re: steel formdeck as shearwall? Thu, 30 Oct 2003 22:14:57 -0700 (MST)
  • Re: ASCE7/IBC 2000 minimum wind load Mon, 10 Nov 2003 19:15:35 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Sun, 16 Nov 2003 18:17:06 -0700 (MST)
  • Re: Connections Mon, 1 Dec 2003 19:14:47 -0700 (MST)

• Ricky Leblanc
  • Beam Bearing Stiffeners Wed, 29 Oct 2003 09:14:04 -0700 (MST)

• rlewistx
  • Re: Posting Live Load Wed, 8 Oct 2003 14:55:45 -0600 (MDT)
  • Slender CMU Wall Design Fri, 28 Nov 2003 18:57:19 -0700 (MST)
  • Lateral Deflection of Masonry Wall Building Fri, 28 Nov 2003 19:12:07 -0700 (MST)
  • Tall light pole foundation Mon, 1 Dec 2003 10:47:37 -0700 (MST)

• Robert Rogers
  • Steel Joist Designation - 1950's...Not in SJI Manual Fri, 7 Nov 2003 08:34:38 -0700 (MST)

• Roberto salinas
  • Perforated shearwall design Tue, 2 Dec 2003 13:49:10 -0700 (MST)
  • RE: Perforated shear wall design Tue, 2 Dec 2003 14:35:23 -0700 (MST)
  • Re: Perforated shearwall design Tue, 2 Dec 2003 18:52:15 -0700 (MST)

• Roger Davis
  • RE: Barn Structure Wed, 8 Oct 2003 06:41:56 -0600 (MDT)
  • RE: Posting Live Load Wed, 8 Oct 2003 13:52:57 -0600 (MDT)

• Roger Turk
  • Slab with Concrete Blocks Wed, 1 Oct 2003 17:27:29 -0600 (MDT)
  • RE: Fibermesh Topping Slab Thu, 2 Oct 2003 17:56:44 -0600 (MDT)
  • RE: Butt-welding a gap Fri, 3 Oct 2003 14:58:29 -0600 (MDT)
  • Re: Rebar breaking Tue, 7 Oct 2003 12:38:43 -0600 (MDT)
  • Re: Posting Live Load Wed, 8 Oct 2003 15:51:42 -0600 (MDT)
  • Re: Posting Live Load Wed, 8 Oct 2003 21:41:59 -0600 (MDT)
  • RE: Wood continuous beams Thu, 9 Oct 2003 11:46:03 -0600 (MDT)
  • Viruses (again) Mon, 13 Oct 2003 20:46:39 -0600 (MDT)
  • Re: is it working Wed, 15 Oct 2003 22:24:47 -0600 (MDT)
  • Re: Q: Flatness Tolerances for Residenti Fri, 17 Oct 2003 06:40:23 -0600 (MDT)
  • RE: Plan Check from a plan reviewer Tue, 21 Oct 2003 16:32:26 -0600 (MDT)
  • RE: Concrete Text Books Wed, 22 Oct 2003 00:48:18 -0600 (MDT)
  • RE: Concrete Text Books Wed, 22 Oct 2003 09:37:07 -0600 (MDT)
  • IS IT JUST ME OR ARE OTHERS GETTING EMAI Wed, 22 Oct 2003 09:56:57 -0600 (MDT)
  • RE: Concrete Text Books Thu, 23 Oct 2003 07:03:31 -0600 (MDT)
  • Re: Rebar Strengths Thu, 23 Oct 2003 17:58:35 -0600 (MDT)
  • Masonry lap splice Tue, 28 Oct 2003 08:45:33 -0700 (MST)
  • RE: steel formdeck as shearwall? Thu, 30 Oct 2003 11:15:36 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 07:46:39 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 10:20:21 -0700 (MST)
  • Re: Special Inspection Sat, 1 Nov 2003 09:59:34 -0700 (MST)
  • Re: Reusing Foundations (was: SE Tests) Thu, 6 Nov 2003 10:42:13 -0700 (MST)
  • Re: SICK PROFESSION Mon, 10 Nov 2003 09:31:43 -0700 (MST)
  • Re: Paul Fratessa: GOOD RIDDANCE Wed, 12 Nov 2003 20:51:10 -0700 (MST)
  • RE: Paul Fratessa: GOOD RIDDANCE Thu, 13 Nov 2003 09:15:22 -0700 (MST)
  • RE: pool wall design Fri, 14 Nov 2003 09:49:11 -0700 (MST)
  • shear bolts- glulam Mon, 17 Nov 2003 07:03:23 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Mon, 17 Nov 2003 08:15:33 -0700 (MST)
  • Internal Wind Pressure for Partially Enc Wed, 19 Nov 2003 14:43:07 -0700 (MST)
  • Re: E/O Insurance Thu, 20 Nov 2003 19:03:41 -0700 (MST)
  • Certification letters Fri, 21 Nov 2003 09:08:08 -0700 (MST)
  • Re: E/O Insurance Fri, 21 Nov 2003 11:38:32 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 13:08:24 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 18:24:31 -0700 (MST)
  • RE: Connections Tue, 2 Dec 2003 07:14:53 -0700 (MST)
  • RE: Connections Tue, 2 Dec 2003 11:14:13 -0700 (MST)
  • RE: Schooling (was Connections) Tue, 2 Dec 2003 11:28:00 -0700 (MST)
  • RE: Perforated shear wall design Tue, 2 Dec 2003 21:31:47 -0700 (MST)
  • RE: Schooling (was Connections) Tue, 2 Dec 2003 21:39:39 -0700 (MST)
  • Acceptable Level of Overstress Wed, 3 Dec 2003 20:48:35 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 10:39:54 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:09:20 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:15:03 -0700 (MST)
  • 30" TJ50 Capacity Thu, 4 Dec 2003 14:56:01 -0700 (MST)
  • RE: truss bracing Fri, 5 Dec 2003 07:50:06 -0700 (MST)
  • RE: stone Veneer support Tue, 16 Dec 2003 08:29:33 -0700 (MST)
  • Re: Spam generation by list Thu, 18 Dec 2003 07:37:20 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) STA Thu, 18 Dec 2003 07:39:13 -0700 (MST)
  • Re: Spam generation by list Thu, 18 Dec 2003 11:49:23 -0700 (MST)
  • Re: Outsourcing - light commercial and h Fri, 19 Dec 2003 08:17:47 -0700 (MST)
  • Re: Masonry Structural Notes and Specifi Tue, 23 Dec 2003 10:55:08 -0700 (MST)
  • Re: brick walls Wed, 24 Dec 2003 02:35:50 -0700 (MST)
  • RE: Paso Robles Earthquake Wed, 24 Dec 2003 15:39:01 -0700 (MST)
  • RE: Paso Robles Earthquake Wed, 24 Dec 2003 20:34:52 -0700 (MST)
  • Re: Paso Robles Earthquake Thu, 25 Dec 2003 09:42:45 -0700 (MST)
  • RE: Paso Robles Earthquake Fri, 26 Dec 2003 11:29:46 -0700 (MST)
  • RE: Fee for Custom Residence Mon, 29 Dec 2003 16:16:01 -0700 (MST)
  • RE: Fee for Custom Residence Mon, 29 Dec 2003 19:29:42 -0700 (MST)
  • Old ASTMS Tue, 30 Dec 2003 14:26:12 -0700 (MST)
  • RE: Fee for Custom Residence Tue, 30 Dec 2003 19:39:09 -0700 (MST)
  • San Simeon and Iran Earthquakes Wed, 31 Dec 2003 13:15:41 -0700 (MST)
  • Earthquake ground movement question Wed, 31 Dec 2003 18:01:44 -0700 (MST)

• Ron Hill
  • RE: question on K factors and P-delta analysis Tue, 7 Oct 2003 09:19:21 -0600 (MDT)
  • RE: Contact loads from moving loads Wed, 8 Oct 2003 08:12:40 -0600 (MDT)

• rupali-iit
  • ansys help Wed, 10 Dec 2003 03:47:14 -0700 (MST)
  • ansys Mon, 15 Dec 2003 20:52:13 -0700 (MST)

• savksa savksa
  • French Stuff Sun, 9 Nov 2003 15:31:35 -0700 (MST)

• Schwan, Martin K.
  • Plan Check from a plan reviewer Thu, 16 Oct 2003 11:12:51 -0600 (MDT)
  • allowable foundation and lateral pressure Tue, 21 Oct 2003 18:13:16 -0600 (MDT)
  • Plan Check Tue, 21 Oct 2003 18:48:56 -0600 (MDT)
  • RE: Plan Check Tue, 21 Oct 2003 19:22:39 -0600 (MDT)
  • RE: Plan Check Tue, 21 Oct 2003 19:34:16 -0600 (MDT)
  • minimum wind loads in the IBC Wed, 29 Oct 2003 19:33:11 -0700 (MST)
  • Regional permitting differences - calculations Thu, 6 Nov 2003 11:12:13 -0700 (MST)
  • RE: Fire Rating for Canopy - IBC 2000 Wed, 12 Nov 2003 11:33:21 -0700 (MST)
  • RE: Shear transfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 16:54:29 -0700 (MST)
  • RE: Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 10:01:53 -0700 (MST)
  • RE: Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 19:23:15 -0700 (MST)
  • wind loading on fences in IBC land Wed, 19 Nov 2003 18:24:44 -0700 (MST)
  • RE: Perforated shear wall design Tue, 2 Dec 2003 14:22:08 -0700 (MST)
  • RE: Perforated shear wall design Tue, 2 Dec 2003 15:10:28 -0700 (MST)
  • RE: Acceptable Level of Overstress Thu, 4 Dec 2003 09:46:51 -0700 (MST)
  • RE: Plated wood truss failures? Thu, 4 Dec 2003 12:32:36 -0700 (MST)
  • SPECIFIC GRAVITY OF MICROLLAM Tue, 9 Dec 2003 12:50:12 -0700 (MST)
  • FW: SPECIFIC GRAVITY OF MICROLLAM Tue, 9 Dec 2003 13:14:13 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 09:44:20 -0700 (MST)
  • RE: Vibration design practice for condominiums Wed, 17 Dec 2003 10:09:43 -0700 (MST)

• Scott Maxwell
  • Re: FEMA 310 Replacement? Thu, 2 Oct 2003 16:27:04 -0600 (MDT)
  • Re: Torsion in wood beam Fri, 3 Oct 2003 06:26:13 -0600 (MDT)
  • RE: 1.7 allowable increase gone? 2003 IBC Tue, 7 Oct 2003 23:27:33 -0600 (MDT)
  • Re: Contact loads from moving loads Tue, 7 Oct 2003 23:36:15 -0600 (MDT)
  • Re: Seminars on concrete reparation Thu, 9 Oct 2003 23:11:58 -0600 (MDT)
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Fri, 17 Oct 2003 03:49:21 -0600 (MDT)
  • Re: Q: Flatness Tolerances for Residential Slab Fri, 17 Oct 2003 03:53:01 -0600 (MDT)
  • Re: k's in LRFD Third Edition Fri, 17 Oct 2003 20:33:51 -0600 (MDT)
  • RE: Plan Check (was Re: Rigid Wood Diaphragm?) Fri, 17 Oct 2003 20:51:12 -0600 (MDT)
  • Re: Seismic Load Factors Mon, 20 Oct 2003 20:41:32 -0600 (MDT)
  • Re: Seismic Load Factors Mon, 20 Oct 2003 20:48:00 -0600 (MDT)
  • Re: Concrete Text Books Tue, 21 Oct 2003 13:38:00 -0600 (MDT)
  • Re: Seismic Load Factors Tue, 21 Oct 2003 13:46:00 -0600 (MDT)
  • Re: allowable foundation and lateral pressure Tue, 21 Oct 2003 21:11:47 -0600 (MDT)
  • RE: Concrete Text Books Tue, 21 Oct 2003 21:20:52 -0600 (MDT)
  • Re: Two-way flat plate moment frame question Tue, 21 Oct 2003 21:32:25 -0600 (MDT)
  • Re: Concrete Text Books Tue, 21 Oct 2003 21:38:47 -0600 (MDT)
  • RE: Two-way flat plate moment frame question Wed, 22 Oct 2003 11:16:01 -0600 (MDT)
  • Re: Precast tension stresses Fri, 24 Oct 2003 13:21:21 -0600 (MDT)
  • RE: Masonry lap splice (fwd) Wed, 29 Oct 2003 14:20:30 -0700 (MST)
  • RE: steel formdeck as shearwall? Thu, 30 Oct 2003 12:24:05 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 10:36:11 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 11:44:32 -0700 (MST)
  • Re: CA SE / SE2 Mon, 3 Nov 2003 22:45:47 -0700 (MST)
  • RE: Reusing Foundations (was: SE Tests) Wed, 5 Nov 2003 10:56:30 -0700 (MST)
  • Re: CA SE / SE2 Wed, 5 Nov 2003 10:57:11 -0700 (MST)
  • RE: SE Tests Wed, 5 Nov 2003 11:24:07 -0700 (MST)
  • Re: SE Tests Thu, 6 Nov 2003 17:04:18 -0700 (MST)
  • RE: SE Tests Thu, 6 Nov 2003 23:19:54 -0700 (MST)
  • RE: SE Tests Thu, 6 Nov 2003 23:28:30 -0700 (MST)
  • RE: SE Test Fri, 7 Nov 2003 14:07:25 -0700 (MST)
  • Re: CA PE with regards to WA PE Fri, 7 Nov 2003 14:16:34 -0700 (MST)
  • RE: SE Tests Fri, 7 Nov 2003 14:31:41 -0700 (MST)
  • RE: CA PE with regards to WA PE Fri, 7 Nov 2003 14:34:09 -0700 (MST)
  • RE: CA PE with regards to WA PE Fri, 7 Nov 2003 15:20:43 -0700 (MST)
  • RE: SE Tests Fri, 7 Nov 2003 22:32:10 -0700 (MST)
  • Re: CA PE with regards to WA PE Sat, 8 Nov 2003 01:21:59 -0700 (MST)
  • RE: SE Test Sat, 8 Nov 2003 12:52:10 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 03:06:58 -0700 (MST)
  • Re: CA PE with regards to WA PE Mon, 10 Nov 2003 15:41:02 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 16:03:40 -0700 (MST)
  • RE: Outsourcing - Part I (was Sick Profession) a response to Stan Caldwell Mon, 10 Nov 2003 16:21:00 -0700 (MST)
  • Re: SICK PROFESSION Mon, 10 Nov 2003 17:47:40 -0700 (MST)
  • RE: Outsourcing - Part I (was Sick Profession) a response to Stan Caldwell Mon, 10 Nov 2003 17:58:50 -0700 (MST)
  • SEA (was Sick Profession Mon, 10 Nov 2003 21:31:30 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 21:59:50 -0700 (MST)
  • RE: H1-B -Abusers Mon, 10 Nov 2003 22:21:57 -0700 (MST)
  • Re: SICK PROFESSION Mon, 10 Nov 2003 22:30:49 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 22:38:46 -0700 (MST)
  • RE: SEA (was Sick Profession Tue, 11 Nov 2003 01:40:44 -0700 (MST)
  • Re: IBC 2000 load combinations Tue, 11 Nov 2003 07:34:28 -0700 (MST)
  • RE: IBC 2000 load combinations Tue, 11 Nov 2003 10:50:28 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 14:34:59 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 14:50:04 -0700 (MST)
  • Re: SICK PROFESSION Tue, 11 Nov 2003 15:07:54 -0700 (MST)
  • RE: IBC 2000 load combinations Tue, 11 Nov 2003 15:17:34 -0700 (MST)
  • RE: SICK PROFESSION Wed, 12 Nov 2003 10:36:45 -0700 (MST)
  • RE: SICK PROFESSION Wed, 12 Nov 2003 11:36:35 -0700 (MST)
  • Re: A706 & A615 Reinfocement Wed, 12 Nov 2003 15:28:26 -0700 (MST)
  • Re: A706 & A615 Reinfocement Wed, 12 Nov 2003 16:35:10 -0700 (MST)
  • RE: Paul Fratessa: GOOD RIDDANCE Thu, 13 Nov 2003 01:28:54 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Sun, 16 Nov 2003 04:15:55 -0700 (MST)
  • Re: 4" CMU walls with out-of-plane loads Sun, 16 Nov 2003 04:35:44 -0700 (MST)
  • RE: CMU Column Ties (horizontal) Sun, 16 Nov 2003 19:18:48 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Mon, 17 Nov 2003 12:09:08 -0700 (MST)
  • RE: Pennsylvania Commonwealth Court Clarifies the Title "Engineer" Mon, 17 Nov 2003 16:54:29 -0700 (MST)
  • Re: E/O Insurance Wed, 19 Nov 2003 21:49:21 -0700 (MST)
  • RE: 1930's Poured in Place Concrete Building Thu, 20 Nov 2003 08:33:26 -0700 (MST)
  • RE: cost of field drilling holes Thu, 20 Nov 2003 08:43:50 -0700 (MST)
  • Re: Archive Wind Load Help Thu, 20 Nov 2003 08:49:48 -0700 (MST)
  • Re: Shear wall Beam Design Tue, 25 Nov 2003 09:58:42 -0700 (MST)
  • Re: Shear wall Beam Design Tue, 25 Nov 2003 10:37:23 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 13:49:40 -0700 (MST)
  • Re: Connections Fri, 28 Nov 2003 11:44:47 -0700 (MST)
  • RE: Connections Mon, 1 Dec 2003 18:41:38 -0700 (MST)
  • Structural Drafting course (was RE: Connections) Mon, 1 Dec 2003 22:20:55 -0700 (MST)
  • RE: Structural Drafting course (was RE: Connections) Tue, 2 Dec 2003 06:10:50 -0700 (MST)
  • RE: Engineering Education Tue, 2 Dec 2003 19:37:04 -0700 (MST)
  • RE: Engineering Education Tue, 2 Dec 2003 19:48:35 -0700 (MST)
  • RE: Schooling (was Connections) Tue, 2 Dec 2003 20:35:14 -0700 (MST)
  • RE: Schooling (was Connections) Tue, 2 Dec 2003 20:43:23 -0700 (MST)
  • RE: Structural Drafting course (was RE: Connections) Tue, 2 Dec 2003 21:20:54 -0700 (MST)
  • RE: Schooling (was Connections) Tue, 2 Dec 2003 22:09:45 -0700 (MST)
  • RE: Schooling (was Connections) Wed, 3 Dec 2003 20:07:17 -0700 (MST)
  • Re: BS Degrees (emphasis on BS) Wed, 3 Dec 2003 21:26:18 -0700 (MST)
  • RE: Schooling (was Connections) Wed, 3 Dec 2003 21:35:56 -0700 (MST)
  • RE: Schooling Wed, 3 Dec 2003 21:54:54 -0700 (MST)
  • Re: Post-tensioning Software (was Connections) Wed, 3 Dec 2003 22:02:34 -0700 (MST)
  • Re: Where is CHRIS WRIGHT? Wed, 3 Dec 2003 22:04:41 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Wed, 3 Dec 2003 22:25:22 -0700 (MST)
  • Re: Schooling (was Connections) Wed, 3 Dec 2003 22:28:30 -0700 (MST)
  • Re: Schooling (was Connections) Wed, 3 Dec 2003 22:41:58 -0700 (MST)
  • Re: school, stuff Thu, 4 Dec 2003 10:19:05 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 10:32:36 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:25:01 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:33:34 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:42:30 -0700 (MST)
  • RE: Schooling (was Connections) Thu, 4 Dec 2003 11:51:11 -0700 (MST)
  • Re: Schooling (was Connections) Fri, 5 Dec 2003 12:59:48 -0700 (MST)
  • RE: Schooling (was Connections) Fri, 5 Dec 2003 14:34:25 -0700 (MST)
  • Re: Paper Space - was: Engineering Education Reply to Bill P. from Gerard Sat, 6 Dec 2003 11:57:02 -0700 (MST)
  • RE: Paper Space - was: Engineering Education Reply to Bill P. from Gerard Sun, 7 Dec 2003 01:24:27 -0700 (MST)
  • Re: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 13:59:51 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Tue, 9 Dec 2003 11:45:06 -0700 (MST)
  • RE: Keeping the American Spirit Alive Thu, 11 Dec 2003 22:28:16 -0700 (MST)
  • RE: Tell me what's really on your mind Mon, 15 Dec 2003 17:49:48 -0700 (MST)
  • RE: stone Veneer support Tue, 16 Dec 2003 07:26:52 -0700 (MST)
  • Re: ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 10:23:11 -0700 (MST)
  • Re: ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 11:24:33 -0700 (MST)
  • Re: ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 13:34:12 -0700 (MST)
  • Re: ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 15:19:45 -0700 (MST)
  • RE: SEII results - anyone Tue, 16 Dec 2003 15:27:25 -0700 (MST)
  • RE: SEII results - anyone Tue, 16 Dec 2003 18:06:41 -0700 (MST)
  • Re: SEII results - anyone (CA SE Exam) Tue, 16 Dec 2003 21:43:47 -0700 (MST)
  • Re: Vibration design practice for condominiums Tue, 16 Dec 2003 21:52:08 -0700 (MST)
  • RE: SEII results - anyone Wed, 17 Dec 2003 10:01:38 -0700 (MST)
  • Re: tests, job opening Wed, 17 Dec 2003 10:04:43 -0700 (MST)
  • Re: Spam generation by list Wed, 17 Dec 2003 18:31:05 -0700 (MST)
  • Re: Spam generation by list Wed, 17 Dec 2003 20:34:28 -0700 (MST)
  • Re: Spam generation by list Thu, 18 Dec 2003 12:33:45 -0700 (MST)
  • Re: Fwd: RE: Spam generation by list Thu, 18 Dec 2003 22:47:14 -0700 (MST)
  • Test Sat, 20 Dec 2003 14:20:47 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Sat, 20 Dec 2003 15:32:09 -0700 (MST)
  • RE: IRAN QUAKE/can we discuss this? Mon, 29 Dec 2003 06:54:34 -0700 (MST)
  • Re: Old ASTMS Tue, 30 Dec 2003 16:02:22 -0700 (MST)
  • Re: Misc Opinions Tue, 30 Dec 2003 16:10:21 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 23:22:54 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 23:58:38 -0700 (MST)
  • Re: Louisiana Engineers Thu, 1 Jan 2004 01:21:48 -0700 (MST)

• Scott, William N.
  • RE: Barn Structure Tue, 7 Oct 2003 18:20:07 -0600 (MDT)
  • RE: frost heave Mon, 13 Oct 2003 15:35:51 -0600 (MDT)
  • RE: frost heave Mon, 13 Oct 2003 17:06:19 -0600 (MDT)
  • RE: SE Tests Thu, 6 Nov 2003 11:38:18 -0700 (MST)
  • RE: SE Tests Fri, 7 Nov 2003 10:53:18 -0700 (MST)
  • RE: Outsourcing - Part I (was Sick Profession) a response to Stan Caldwell Mon, 10 Nov 2003 16:58:04 -0700 (MST)
  • RE: GOOD PROFESSION Tue, 11 Nov 2003 09:48:51 -0700 (MST)
  • RE: ACI Detailing Manual SP-66(94) Tue, 16 Dec 2003 11:18:57 -0700 (MST)
  • RE: Paso Robles and other earthquakes 2 Mon, 29 Dec 2003 13:39:33 -0700 (MST)
  • Question on ASCE 7-02 Load Combinations Mon, 29 Dec 2003 13:57:46 -0700 (MST)
  • RE: Paso Robles and other earthquakes 2 Mon, 29 Dec 2003 15:04:07 -0700 (MST)

• SE3949
  • A706 & A615 Reinfocement Wed, 12 Nov 2003 11:41:59 -0700 (MST)
  • Piping & Ducts supports Wed, 12 Nov 2003 11:48:55 -0700 (MST)

• Sen, Ying-Tzung
  • Is 'List Server' up or down Wed, 15 Oct 2003 14:11:28 -0600 (MDT)

• Seth W. Cutler
  • CA PE with regards to WA PE Fri, 7 Nov 2003 12:11:43 -0700 (MST)
  • Re: CA PE with regards to WA PE Fri, 7 Nov 2003 13:19:24 -0700 (MST)
  • Re: CA PE with regards to WA PE Mon, 10 Nov 2003 10:59:23 -0700 (MST)
  • Re: Shear Transfer from roof diaphragms.... Thu, 13 Nov 2003 09:59:11 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 09:59:01 -0700 (MST)
  • RE: Acceptable Level of Overstress Thu, 4 Dec 2003 11:22:30 -0700 (MST)
  • Re: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 10:05:41 -0700 (MST)

• Shafat Qazi
  • Re: SICK PROFESSION Mon, 10 Nov 2003 19:43:18 -0700 (MST)
  • RE: SICK PROFESSION Mon, 10 Nov 2003 22:56:43 -0700 (MST)
  • RE: SICK PROFESSION Tue, 11 Nov 2003 11:14:22 -0700 (MST)
  • [no subject] Fri, 14 Nov 2003 13:43:34 -0700 (MST)
  • Re: Spam generation by list Wed, 17 Dec 2003 18:47:18 -0700 (MST)
  • Re: Spam generation by list Thu, 18 Dec 2003 10:33:13 -0700 (MST)
  • Fwd: RE: Spam generation by list Thu, 18 Dec 2003 20:50:28 -0700 (MST)
  • MESSAGE FROM LIST ADMIN Wed, 31 Dec 2003 11:48:58 -0700 (MST)

• Shapton & Partners
  • Re: PCI Volume 5, since you brought up Avo Mon, 13 Oct 2003 18:35:30 -0600 (MDT)
  • Avo wrt ACI 318 Appendix D Fri, 17 Oct 2003 11:23:02 -0600 (MDT)
  • Re: Joist manufacturer Mon, 20 Oct 2003 10:27:23 -0600 (MDT)
  • Fw: Avo wrt ACI 318 Appendix D Mon, 20 Oct 2003 13:12:44 -0600 (MDT)
  • Re: Plan Check Tue, 21 Oct 2003 19:17:33 -0600 (MDT)
  • Re: Column located on 4" existing concrete slab (Balcony vs Deck) Thu, 30 Oct 2003 15:46:15 -0700 (MST)
  • Re: Aluminum Tue, 4 Nov 2003 12:31:10 -0700 (MST)
  • Re: Dowel brng strength (Fe) for ASTM A36 Stl in 2001 AF&PA NDS Thu, 6 Nov 2003 14:12:59 -0700 (MST)
  • Re: SE Tests Fri, 7 Nov 2003 11:08:03 -0700 (MST)
  • Re: CA PE with regards to WA PE Fri, 7 Nov 2003 12:53:33 -0700 (MST)
  • Re: SICK PROFESSION Wed, 12 Nov 2003 13:47:34 -0700 (MST)
  • Re: Shear tranfer from roof diaphragm to shearwalls with eaves? Wed, 12 Nov 2003 16:36:42 -0700 (MST)
  • Re: X-braces Wed, 19 Nov 2003 18:43:51 -0700 (MST)
  • Re: Perforated shear wall design Wed, 3 Dec 2003 20:04:08 -0700 (MST)
  • Re: Outsourcing - light commercial and h Fri, 19 Dec 2003 11:04:19 -0700 (MST)

• Sherman, William
  • RE: Masonry lap Splice Fri, 31 Oct 2003 13:28:48 -0700 (MST)
  • RE: concrete tanks Tue, 4 Nov 2003 08:23:38 -0700 (MST)
  • FW: concrete tanks Tue, 4 Nov 2003 09:04:35 -0700 (MST)
  • RE: Aluminum Tue, 4 Nov 2003 13:32:22 -0700 (MST)
  • Building Code Complexity Thu, 6 Nov 2003 10:52:26 -0700 (MST)
  • RE: Peer Reviews & Value Engineering Reviews Thu, 6 Nov 2003 13:05:47 -0700 (MST)
  • Building Code Complexity Thu, 6 Nov 2003 13:58:32 -0700 (MST)
  • RE: IBC 2000 load combinations Tue, 11 Nov 2003 17:36:17 -0700 (MST)
  • RE: ASTM A 36 steel Wed, 12 Nov 2003 11:02:59 -0700 (MST)
  • RE: ASTM A 36 steel Wed, 12 Nov 2003 11:13:30 -0700 (MST)
  • RE: Galvanized Rebar Mon, 17 Nov 2003 12:59:45 -0700 (MST)
  • RE: Galvanized Rebar Mon, 17 Nov 2003 13:15:39 -0700 (MST)
  • RE: Galvanic corrosion Tue, 18 Nov 2003 12:27:43 -0700 (MST)
  • RE: Connections Tue, 2 Dec 2003 07:44:49 -0700 (MST)
  • RE: Schooling Wed, 3 Dec 2003 08:07:39 -0700 (MST)
  • RE: AISC Seismic for ASD Mon, 8 Dec 2003 08:12:55 -0700 (MST)
  • RE: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 12:05:32 -0700 (MST)
  • RE: Lateral Deflection of Masonry Wall Building Mon, 8 Dec 2003 14:32:54 -0700 (MST)
  • RE: Railing clearances Mon, 22 Dec 2003 11:54:43 -0700 (MST)

• Shival Tailor
  • Slab with Concrete Blocks Wed, 1 Oct 2003 13:17:08 -0600 (MDT)
  • Re: Slab with Concrete Blocks Thu, 2 Oct 2003 12:49:43 -0600 (MDT)

• Silenio Marciano de Paulo
  • Re: SEAINT Website Tue, 4 Nov 2003 05:57:15 -0700 (MST)
  • linear and non linear stability of medium and tall buildings Wed, 12 Nov 2003 13:27:22 -0700 (MST)

• Silverhill Co Silverhill Co LLC
  • Re: steel formdeck as shearwall? Fri, 31 Oct 2003 10:10:06 -0700 (MST)

• simina
  • Re: Connections Fri, 28 Nov 2003 23:18:30 -0700 (MST)

• Simon
  • Re: Concrete Text Books Tue, 21 Oct 2003 21:51:56 -0600 (MDT)
  • Re: CBC 1921.4 Frame Members Design Mon, 3 Nov 2003 13:45:26 -0700 (MST)

• SMO3
  • Re: SE Tests Thu, 6 Nov 2003 10:49:03 -0700 (MST)
  • Re: CMU Column Ties (horizontal) Sun, 16 Nov 2003 20:52:58 -0700 (MST)

• Sprague, Harold O.
  • RE: Slab with Concrete Blocks Wed, 1 Oct 2003 15:19:18 -0600 (MDT)
  • RE: Fibermesh Topping Slab Thu, 2 Oct 2003 11:47:26 -0600 (MDT)
  • RE: Fibermesh Topping Slab Fri, 3 Oct 2003 08:05:53 -0600 (MDT)
  • RE: Butt-welding a gap Fri, 3 Oct 2003 08:31:04 -0600 (MDT)
  • RE: Fibermesh Topping Slab Fri, 3 Oct 2003 08:36:48 -0600 (MDT)
  • RE: Butt-welding a gap Fri, 3 Oct 2003 10:41:07 -0600 (MDT)
  • RE: Butt-welding a gap Fri, 3 Oct 2003 10:45:06 -0600 (MDT)
  • RE: Rebar breaking Tue, 7 Oct 2003 11:31:16 -0600 (MDT)
  • RE: Thickened Floor Slabs Tue, 7 Oct 2003 12:27:45 -0600 (MDT)
  • RE: Contact loads from moving loads Wed, 8 Oct 2003 08:07:39 -0600 (MDT)
  • RE: Rebar breaking Wed, 8 Oct 2003 12:45:28 -0600 (MDT)
  • RE: Pipe Analysis Fri, 10 Oct 2003 08:36:36 -0600 (MDT)
  • RE: Water Proof Membrane Fri, 10 Oct 2003 14:23:14 -0600 (MDT)
  • RE: Mold Remediation Mon, 13 Oct 2003 09:11:23 -0600 (MDT)
  • RE: Water Proof Membrane Mon, 13 Oct 2003 11:18:49 -0600 (MDT)
  • RE: Flatness Tolerances for Residential Slab Fri, 17 Oct 2003 09:21:14 -0600 (MDT)
  • RE: Deflection limits for skylight support framing. Fri, 17 Oct 2003 12:18:52 -0600 (MDT)
  • RE: double nut anchor bolts Mon, 27 Oct 2003 15:14:36 -0700 (MST)
  • RE: Bolt question Tue, 28 Oct 2003 07:40:17 -0700 (MST)
  • RE: Beam Bearing Stiffeners Wed, 29 Oct 2003 10:13:46 -0700 (MST)
  • RE: Blind Fasteners for Structural Applications Wed, 29 Oct 2003 10:41:58 -0700 (MST)
  • RE: Army/Air Force Technical Documents Wed, 29 Oct 2003 12:34:46 -0700 (MST)
  • RE: steel formdeck as shearwall? Thu, 30 Oct 2003 09:32:08 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 08:26:42 -0700 (MST)
  • RE: steel formdeck as shearwall? Fri, 31 Oct 2003 08:41:25 -0700 (MST)
  • RE: Atlantic City Garage Collapse Fri, 31 Oct 2003 08:51:30 -0700 (MST)
  • RE: Special Inspection Fri, 31 Oct 2003 09:35:49 -0700 (MST)
  • RE: Unbraced Length for Stair Stringers? Fri, 7 Nov 2003 08:10:04 -0700 (MST)
  • RE: SE Test Fri, 7 Nov 2003 13:37:45 -0700 (MST)
  • A706 bar vs. A615 bar Thu, 13 Nov 2003 15:03:00 -0700 (MST)
  • RE: Mobile Crane Load on Concrete Flume/Bridge Fri, 14 Nov 2003 10:03:33 -0700 (MST)

• Stanley E Scholl
  • Re: Mold Remediation Sat, 11 Oct 2003 08:34:17 -0600 (MDT)
  • Re: Hardy Frames Thu, 23 Oct 2003 19:30:39 -0600 (MDT)
  • Re: Thickened footings under interior braced walls (Was: RE Hardy Frames) Mon, 27 Oct 2003 11:49:40 -0700 (MST)
  • Re: Column located on 4" existing concrete slab Wed, 29 Oct 2003 20:07:35 -0700 (MST)
  • Re: SE Test Sat, 8 Nov 2003 09:23:05 -0700 (MST)
  • Re: GOOD PROFESSION Tue, 11 Nov 2003 09:07:22 -0700 (MST)
  • Re: Expected soil settlement. Fri, 14 Nov 2003 22:24:57 -0700 (MST)
  • Re: wind loading on fences in IBC land Wed, 19 Nov 2003 21:08:06 -0700 (MST)
  • Re: Raymond Step Tapered Piles Mon, 8 Dec 2003 18:59:16 -0700 (MST)
  • Re: Upgrading unreinforced quarry stone masonry building ... Sun, 14 Dec 2003 21:54:48 -0700 (MST)
  • Re: Outsourcing - light commercial and high end residential Mon, 22 Dec 2003 09:19:44 -0700 (MST)
  • Re: Fee for Custom Residence Wed, 24 Dec 2003 20:15:26 -0700 (MST)
  • Re: Paso Robles Earthquake /ref. to Santa Monica Thu, 25 Dec 2003 10:56:46 -0700 (MST)
  • Re: Paso Robles Earthquake/Hardship Fri, 26 Dec 2003 16:32:16 -0700 (MST)

• Steve Gordin
  • Re: AASHTO Pedestrian Bridge Railing Requirements Tue, 25 Nov 2003 08:54:44 -0700 (MST)
  • Re: E/O Insurance Tue, 25 Nov 2003 10:23:43 -0700 (MST)
  • Paso Robles and other earthquakes 2 Mon, 29 Dec 2003 12:48:36 -0700 (MST)
  • Paso Robles and other earthquakes 1 Mon, 29 Dec 2003 12:53:42 -0700 (MST)
  • Re: Paso Robles and other earthquakes 2 Mon, 29 Dec 2003 14:39:30 -0700 (MST)
  • seismic cracking of SOG Mon, 29 Dec 2003 15:34:41 -0700 (MST)
  • Re: seismic cracking of SOG Mon, 29 Dec 2003 16:31:46 -0700 (MST)
  • Re: Paso Robles and other earthquakes 1 Mon, 29 Dec 2003 17:02:31 -0700 (MST)
  • Re: seismic cracking of SOG Mon, 29 Dec 2003 17:48:33 -0700 (MST)
  • Re: Misc Opinions Tue, 30 Dec 2003 08:47:44 -0700 (MST)
  • Re: NYTimes.com Article: Halliburton Contracts in Iraq: The Struggle to Manage Costs Tue, 30 Dec 2003 08:50:01 -0700 (MST)

• Steve Privett
  • Re: Barn Structure Tue, 7 Oct 2003 21:49:53 -0600 (MDT)

• Steve Thompson
  • Re: Florida: High Velocity Hurricane Zone Wed, 10 Dec 2003 16:00:19 -0700 (MST)

• Steve Widmayer
  • RE: California's new Emergency Structural Amendments Fri, 5 Dec 2003 13:15:48 -0700 (MST)
  • RE: Keeping the American Spirit Alive Was: DC PE needed (drawing s review) Thu, 11 Dec 2003 13:13:41 -0700 (MST)
  • RE: CA & NFPA 5000 Thu, 11 Dec 2003 16:31:01 -0700 (MST)

• Structures Online
  • Re: Relative Rigity Calculations? Sat, 8 Nov 2003 08:29:38 -0700 (MST)

• Stuart, Matthew
  • RE: Fibermesh Topping Slab Thu, 2 Oct 2003 11:20:50 -0600 (MDT)
  • RE: Off Topic - Charity Mon, 6 Oct 2003 14:39:29 -0600 (MDT)
  • RE: Rigid Diaphragm for a L Shaped Building Mon, 13 Oct 2003 09:16:28 -0600 (MDT)
  • TEST Wed, 15 Oct 2003 13:55:18 -0600 (MDT)
  • TEST Wed, 15 Oct 2003 14:07:12 -0600 (MDT)
  • Test Wed, 15 Oct 2003 14:13:00 -0600 (MDT)
  • RE: Hyatt Regency Collapse (was:E: Plan Check (was Re: Rigid Wood Diaphragm?) Thu, 16 Oct 2003 07:20:03 -0600 (MDT)
  • TEST Thu, 16 Oct 2003 12:35:57 -0600 (MDT)
  • TEST - Fri, 17 Oct 2003 10:19:24 -0600 (MDT)
  • List Server Problem Fri, 17 Oct 2003 11:01:56 -0600 (MDT)
  • List Server Problem: On most of the emails that I get the only th ing that shows up is (see below): Fri, 17 Oct 2003 11:03:34 -0600 (MDT)
  • Testing Mon, 20 Oct 2003 06:29:19 -0600 (MDT)
  • RE: Building Code Complexity Thu, 6 Nov 2003 14:54:37 -0700 (MST)
  • RE: Seals and signatures Thu, 6 Nov 2003 17:16:46 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 15:31:20 -0700 (MST)
  • RE: foreigners... gotta love them Wed, 12 Nov 2003 15:33:34 -0700 (MST)
  • RE: Interaction diagram for a pile Tue, 18 Nov 2003 11:13:13 -0700 (MST)
  • RE: SE job opportunities - Chicago Wed, 26 Nov 2003 20:07:59 -0700 (MST)
  • RE: DC PE needed (drawings review) Thu, 11 Dec 2003 07:19:17 -0700 (MST)
  • RE: DC PE needed (drawings review) Thu, 11 Dec 2003 07:20:52 -0700 (MST)
  • RE: Advice on hydraulic failure to EC7 needed Thu, 11 Dec 2003 09:59:45 -0700 (MST)
  • RE: Spam generation by list Thu, 18 Dec 2003 11:53:21 -0700 (MST)

• Suresh Acharya
  • Re: Plan Check vs Peer Review Thu, 16 Oct 2003 10:18:07 -0600 (MDT)
  • Re: Hardy Frames Thu, 23 Oct 2003 21:17:50 -0600 (MDT)
  • Re: Rock Anchors - any recommendations Sat, 15 Nov 2003 11:43:16 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 14:30:07 -0700 (MST)
  • Re: Acceptable Level of Overstress Thu, 4 Dec 2003 16:02:19 -0700 (MST)

• Syed Faiz
  • RE: Thickened Floor Slabs Tue, 7 Oct 2003 10:20:46 -0600 (MDT)
  • RE: Thickened Floor Slabs Tue, 7 Oct 2003 10:59:36 -0600 (MDT)
  • RE: Thickened Floor Slabs 2 Wed, 8 Oct 2003 01:31:14 -0600 (MDT)
  • RE: Mold Remediation Thu, 9 Oct 2003 01:38:27 -0600 (MDT)
  • RE: Water Proof Membrane Thu, 16 Oct 2003 00:51:26 -0600 (MDT)
  • RE: Reinforcing vs welded wire fabric Thu, 16 Oct 2003 01:43:21 -0600 (MDT)
  • RE: For the Record Sat, 18 Oct 2003 04:58:26 -0600 (MDT)
  • RE: Welded Wire Reinforcement Mon, 20 Oct 2003 09:18:37 -0600 (MDT)
  • RE: Concrete Text Books Tue, 21 Oct 2003 09:26:11 -0600 (MDT)
  • RE: Concrete Text Books Wed, 22 Oct 2003 01:37:59 -0600 (MDT)
  • RE: Concrete Text Books Wed, 22 Oct 2003 23:48:21 -0600 (MDT)
  • RE: Concrete Text Books Wed, 22 Oct 2003 23:54:03 -0600 (MDT)
  • RE: Rebar Strengths Thu, 23 Oct 2003 01:52:11 -0600 (MDT)
  • RE: Concrete Text Books Sat, 25 Oct 2003 02:37:27 -0600 (MDT)
  • RE: Expansion Joints in concrete slab Tue, 28 Oct 2003 00:51:15 -0700 (MST)
  • RE: concrete tanks Wed, 5 Nov 2003 11:14:29 -0700 (MST)
  • RE: Joints in Slabs on Ground Sat, 15 Nov 2003 03:12:18 -0700 (MST)
  • RE: Rock Anchors - any recommendations Sat, 15 Nov 2003 04:41:00 -0700 (MST)
  • RE: Joints in Slabs on Ground Sun, 16 Nov 2003 02:18:27 -0700 (MST)
  • RE: Joints in Slabs on Ground Wed, 19 Nov 2003 04:21:14 -0700 (MST)
  • RE: Flag-Pole Foundations for light framing Thu, 20 Nov 2003 00:52:26 -0700 (MST)
  • RE: Tall light pole foundation Tue, 2 Dec 2003 00:31:59 -0700 (MST)
  • Where is CHRIS WRIGHT? Tue, 2 Dec 2003 01:57:37 -0700 (MST)
  • RE: Where is CHRIS WRIGHT? Wed, 3 Dec 2003 22:57:47 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Thu, 4 Dec 2003 03:50:26 -0700 (MST)
  • RE: Engineering Education Reply to Bill P. Sat, 6 Dec 2003 12:02:58 -0700 (MST)
  • RE: Keeping the American Spirit Alive Fri, 12 Dec 2003 23:40:58 -0700 (MST)
  • RE: Ontario Pre-Start Health & Safety Review - storage racking Mon, 15 Dec 2003 06:54:33 -0700 (MST)
  • RE: Spam from bcinc Sun, 21 Dec 2003 07:41:50 -0700 (MST)
  • RE: Thoughts on Outsourcing Mon, 22 Dec 2003 08:40:44 -0700 (MST)
  • RE: Secular Holiday Humor [Way Off Topic] Mon, 22 Dec 2003 23:38:58 -0700 (MST)
  • RE: Secular Holiday Humor [Way Off Topic] Tue, 23 Dec 2003 10:05:39 -0700 (MST)
  • RE: cowboys and Indians Wed, 24 Dec 2003 02:18:54 -0700 (MST)
  • IRAN QUAKE/can we discuss ths? Sat, 27 Dec 2003 01:43:57 -0700 (MST)
  • RE: IRAN QUAKE/can we discuss this? Mon, 29 Dec 2003 00:21:08 -0700 (MST)
  • RE: (Correction on ) Info on Bam Quake, and how to help Mon, 29 Dec 2003 02:02:53 -0700 (MST)
  • RE: IRAN QUAKE/can we discuss this? Mon, 29 Dec 2003 07:05:43 -0700 (MST)
  • RE: Paso Robles and other earthquakes 1 Mon, 29 Dec 2003 23:33:30 -0700 (MST)
  • FW: Agree//fantastic!! Tue, 30 Dec 2003 10:11:15 -0700 (MST)
  • RE: Misc Opinions Tue, 30 Dec 2003 10:26:16 -0700 (MST)
  • RE: IRAN QUAKE/can we discuss ths? Wed, 31 Dec 2003 03:01:53 -0700 (MST)
  • RE: Old ASTMS Wed, 31 Dec 2003 12:44:40 -0700 (MST)
  • RE: San Simeon and Iran Earthquakes Thu, 1 Jan 2004 02:09:55 -0700 (MST)

• Tarek Mokhtar
  • Re: Proposed roof design Wed, 1 Oct 2003 17:15:19 -0600 (MDT)
  • out of plane anchorage Question Tue, 11 Nov 2003 16:27:15 -0700 (MST)
  • Re: out of plane anchorage Question Wed, 12 Nov 2003 09:52:01 -0700 (MST)
  • Re: out of plane anchorage Question Fri, 14 Nov 2003 10:18:17 -0700 (MST)
  • Bolt edge distance-steel Wed, 19 Nov 2003 12:34:21 -0700 (MST)
  • stone Veneer support Sat, 13 Dec 2003 13:35:13 -0700 (MST)
  • Re: stone Veneer support Mon, 15 Dec 2003 14:43:01 -0700 (MST)

• TBCoull
  • Re: Raymond Step Tapered Piles Mon, 8 Dec 2003 18:44:36 -0700 (MST)

• Terry Triest
  • RE: off topic: AutoCAD drawing presentation in powerpoint Wed, 22 Oct 2003 06:03:19 -0600 (MDT)
  • RE: IS IT JUST ME OR ARE OTHERS GETTING EMAILS WITH NO TEXT IN THEM OTHER THAN BELOW Wed, 22 Oct 2003 08:28:16 -0600 (MDT)
  • Fire Rating for Canopy - IBC 2000 Tue, 11 Nov 2003 13:44:16 -0700 (MST)
  • RE: Fire Rating for Canopy - IBC 2000 Wed, 12 Nov 2003 13:07:00 -0700 (MST)
  • RE: A706 & A615 Reinfocement Wed, 12 Nov 2003 13:07:56 -0700 (MST)

• Thor Matteson, SE
  • Thickened footings under interior braced walls (Was: RE Hardy Frames) Fri, 24 Oct 2003 20:58:27 -0600 (MDT)
  • Re: Thickened footings under interior braced walls (Was: RE Hardy Frames) Sun, 26 Oct 2003 07:50:00 -0700 (MST)
  • Re: Nail Embedments & Stapled shear panels Wed, 29 Oct 2003 00:11:17 -0700 (MST)
  • Residential truss bracing Tue, 9 Dec 2003 23:31:05 -0700 (MST)
  • Re: Sheathing Requirements Wed, 17 Dec 2003 23:32:29 -0700 (MST)
  • Re: Masonry Structural Notes and Specifications Wed, 24 Dec 2003 00:02:05 -0700 (MST)
  • Outsourcing/world politics/meaning of life Wed, 24 Dec 2003 00:03:24 -0700 (MST)

• Thor Tandy
  • Re: Spam Alert: Re: Proposed roof design Wed, 1 Oct 2003 15:30:19 -0600 (MDT)
  • Re: Viruses (again) Mon, 13 Oct 2003 21:04:31 -0600 (MDT)
  • Re: is it working Wed, 15 Oct 2003 21:38:33 -0600 (MDT)
  • Re: Canadian Concrete Code Question Sun, 16 Nov 2003 00:08:28 -0700 (MST)
  • Re: oh canada! Tue, 16 Dec 2003 16:49:48 -0700 (MST)
  • Civil engineering 900 years ago Wed, 17 Dec 2003 08:01:53 -0700 (MST)

• Thuan Cao
  • Re: seaint Digest for 1 Nov 2003 Sun, 2 Nov 2003 10:57:17 -0700 (MST)

• THunt
  • Re: FEMA 310 Replacement? Thu, 2 Oct 2003 15:24:39 -0600 (MDT)
  • Re: Fibermesh Topping Slab Thu, 2 Oct 2003 17:03:32 -0600 (MDT)
  • Re: Butt-welding a gap Thu, 2 Oct 2003 17:46:50 -0600 (MDT)
  • Re: Butt-welding a gap Thu, 2 Oct 2003 18:00:11 -0600 (MDT)
  • RE: Butt-welding a gap Fri, 3 Oct 2003 14:44:24 -0600 (MDT)
  • ASD One Third Factor Thu, 9 Oct 2003 09:07:36 -0600 (MDT)
  • Concrete Text Books Tue, 21 Oct 2003 08:15:15 -0600 (MDT)
  • Re: double nut anchor bolts Mon, 27 Oct 2003 15:26:16 -0700 (MST)
  • Re: Special Inspection Mon, 3 Nov 2003 08:11:45 -0700 (MST)
  • Re: Weld bolts Tue, 4 Nov 2003 09:07:37 -0700 (MST)
  • Re: Relative Rigidity Calculations? Fri, 7 Nov 2003 08:12:24 -0700 (MST)
  • Re: ASTM A 36 steel Wed, 12 Nov 2003 11:00:55 -0700 (MST)
  • Re: ASTM A 36 steel Wed, 12 Nov 2003 11:28:09 -0700 (MST)
  • Re: A706 & A615 Reinfocement Wed, 12 Nov 2003 12:46:32 -0700 (MST)
  • Re: ASTM A 36 steel Wed, 12 Nov 2003 13:39:13 -0700 (MST)
  • Re: A706 & A615 Reinfocement Wed, 12 Nov 2003 15:46:31 -0700 (MST)
  • Re: Galvanized Rebar Mon, 17 Nov 2003 08:16:42 -0700 (MST)
  • Re: Connections Wed, 26 Nov 2003 12:32:02 -0700 (MST)
  • Re: Connections Mon, 1 Dec 2003 08:17:10 -0700 (MST)
  • Re: Seismic design of walls Wed, 3 Dec 2003 15:33:15 -0700 (MST)
  • Re: Effective length of columns Fri, 5 Dec 2003 08:18:06 -0700 (MST)
  • Re: Q: Hot-Dip Galvanizing of A 307 Bolts and Related Nuts Mon, 8 Dec 2003 12:39:52 -0700 (MST)
  • Raymond Step Tapered Piles Mon, 8 Dec 2003 14:01:48 -0700 (MST)
  • Re: Raymond Step Tapered Piles Tue, 9 Dec 2003 17:19:31 -0700 (MST)
  • RE: Unbraced Length Wed, 10 Dec 2003 14:11:35 -0700 (MST)
  • Re: Side Pressure on Foundation Thu, 11 Dec 2003 16:38:07 -0700 (MST)
  • Re: Liquefaction and Slabs-on-grade Tue, 16 Dec 2003 16:07:07 -0700 (MST)
  • Re: Liquefaction and Slabs-on-grade Fri, 19 Dec 2003 08:37:54 -0700 (MST)
  • Re: Masonry Structural Notes and Specifications Tue, 23 Dec 2003 08:13:30 -0700 (MST)
  • Re: Structural observation Wed, 24 Dec 2003 11:14:59 -0700 (MST)
  • Re: Paso Robles Earthquake Wed, 24 Dec 2003 14:20:36 -0700 (MST)

• Tim Allison
  • Re: Wood density Wed, 1 Oct 2003 07:06:38 -0600 (MDT)
  • RE: Fibermesh Topping Slab Fri, 3 Oct 2003 08:19:59 -0600 (MDT)
  • RE: Concrete Text Books Tue, 21 Oct 2003 13:59:01 -0600 (MDT)

• TJ_Fu
  • Re: W Shape Question Thu, 16 Oct 2003 07:55:52 -0600 (MDT)
  • Re: Bolt question Wed, 5 Nov 2003 11:04:52 -0700 (MST)
  • RE: Galvanized Rebar Mon, 17 Nov 2003 13:19:05 -0700 (MST)
  • Re: AASHTO Pedestrian Bridge Railing Requirements Tue, 25 Nov 2003 09:40:49 -0700 (MST)

• tm
  • Plated wood truss failures? Thu, 4 Dec 2003 11:55:31 -0700 (MST)
  • [no subject] Fri, 5 Dec 2003 10:04:01 -0700 (MST)

• Tom Higgins
  • Vibration design practice for condominiums Tue, 16 Dec 2003 19:06:02 -0700 (MST)

• Tom Skaggs
  • RE: CA PE with regards to WA PE Fri, 7 Nov 2003 14:22:08 -0700 (MST)
  • RE: CA PE with regards to WA PE Fri, 7 Nov 2003 14:49:27 -0700 (MST)
  • RE: NO TRIP TO LINCOLN or WHAT HAPPENED TO THE "WESTERN STATES EXAM"? Mon, 17 Nov 2003 13:01:51 -0700 (MST)
  • RE: Perforated shear wall design Wed, 3 Dec 2003 20:02:54 -0700 (MST)
  • Florida: High Velocity Hurricane Zone Wed, 10 Dec 2003 12:56:57 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) Thu, 11 Dec 2003 11:12:23 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) STAGGERING Wed, 17 Dec 2003 10:45:35 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) STA Fri, 19 Dec 2003 08:03:36 -0700 (MST)
  • RE: Shear Walls and 3x Framing (UBC) STA Fri, 19 Dec 2003 10:15:46 -0700 (MST)
  • RE: Old ASTMS Tue, 30 Dec 2003 10:55:01 -0700 (MST)

• Tripp Howard
  • IBC 2003 and 9th Ed. ASD Thu, 9 Oct 2003 11:04:09 -0600 (MDT)
  • Re: Plan review? Fri, 17 Oct 2003 04:49:01 -0600 (MDT)
  • Re: Army/Air Force Technical Documents Wed, 29 Oct 2003 12:46:13 -0700 (MST)
  • Re: Army/Air Force Technical Documents Wed, 29 Oct 2003 12:56:11 -0700 (MST)
  • Re: Army/Air Force Technical Documents Wed, 29 Oct 2003 14:13:19 -0700 (MST)
  • Creosote Ban? Thu, 4 Dec 2003 14:05:59 -0700 (MST)
  • Re: Creosote Ban? Mon, 8 Dec 2003 06:54:10 -0700 (MST)
  • Liquefaction and Slabs-on-grade Tue, 16 Dec 2003 13:37:06 -0700 (MST)
  • Re: Liquefaction and Slabs-on-grade Tue, 16 Dec 2003 15:46:47 -0700 (MST)
  • Re: Liquefaction and Slabs-on-grade Thu, 18 Dec 2003 15:09:53 -0700 (MST)

• Troy Madlem
  • RE: Proposed roof design Wed, 1 Oct 2003 14:52:57 -0600 (MDT)
  • RE: Proposed roof design Fri, 3 Oct 2003 08:15:16 -0600 (MDT)
  • AASHTO Pedestrian Bridge Railing Requirements Tue, 25 Nov 2003 08:00:15 -0700 (MST)

• Udall, Jeffrey D
  • Unbraced Length Wed, 10 Dec 2003 09:37:02 -0700 (MST)
  • RE: Unbraced Length Thu, 11 Dec 2003 08:35:39 -0700 (MST)
  • RE: Keeping the American Spirit Alive Thu, 11 Dec 2003 13:05:49 -0700 (MST)
  • RE: Keeping the American Spirit Alive Thu, 11 Dec 2003 13:52:40 -0700 (MST)
  • RE: oh canada! Fri, 12 Dec 2003 09:54:00 -0700 (MST)
  • RE: Theatre Roof Tue, 16 Dec 2003 11:25:01 -0700 (MST)
  • RE: Philosophical Differences Mon, 29 Dec 2003 12:08:16 -0700 (MST)
  • RE: Philosophical Differences Mon, 29 Dec 2003 12:43:00 -0700 (MST)
  • RE: Philosophical Differences Mon, 29 Dec 2003 13:15:13 -0700 (MST)

• utej
  • Re: IBC 2003 and 9th Ed. ASD Fri, 10 Oct 2003 14:36:10 -0600 (MDT)
  • Allowable thickness variance for steel plates per AISC Tue, 21 Oct 2003 16:39:40 -0600 (MDT)
  • Dowel brng strength (Fe) for ASTM A36 Stl in 2001 AF&PA NDS Thu, 6 Nov 2003 13:09:50 -0700 (MST)

• v . t . eskelsen
  • [no subject] Tue, 25 Nov 2003 06:40:59 -0700 (MST)

• Walt Sawruk
  • Re: Contact loads from moving loads Fri, 10 Oct 2003 06:11:56 -0600 (MDT)

• Whistle Blower
  • NO TRIP TO LINCOLN or WHAT HAPPENED TO THE "WESTERN STATES EXAM"? Sun, 16 Nov 2003 21:22:30 -0700 (MST)

• William Hoskins
  • Harlen Metal Products Product info Sat, 22 Nov 2003 22:40:13 -0700 (MST)

• William Pulyer
  • seismic design of stairs Wed, 12 Nov 2003 18:11:18 -0700 (MST)

• Wilson L Ching
  • Re: Unbraced Length for Stair Stringers? Sat, 8 Nov 2003 03:42:44 -0700 (MST)

• Wong, Waider
  • CMU software Tue, 18 Nov 2003 21:12:54 -0700 (MST)
  • CMU software Wed, 19 Nov 2003 06:56:03 -0700 (MST)

• Wontae Kim
  • Hanger Reinforcements Mon, 3 Nov 2003 06:29:41 -0700 (MST)
  • Hanger Reinforcement - Precast Spandrels Fri, 7 Nov 2003 06:18:21 -0700 (MST)
  • How to reduce angle size? Wed, 19 Nov 2003 14:44:52 -0700 (MST)
  • Precast Concrete Spandrel Drawings-Parking Garage Wed, 3 Dec 2003 21:59:21 -0700 (MST)
  • 2nd Request::parking garage load-bearing spandrel drawings Fri, 5 Dec 2003 08:15:49 -0700 (MST)

• wsp
  • New Materials Sat, 1 Nov 2003 09:39:25 -0700 (MST)

• Yavuz Seymen
  • RE: Liquefaction and Slabs-on-grade Wed, 17 Dec 2003 00:37:34 -0700 (MST)

• YI
  • Ram Concept Tue, 25 Nov 2003 12:37:21 -0700 (MST)
  • Angle in Bending Thu, 4 Dec 2003 12:56:28 -0700 (MST)
  • RE: Angle in Bending Thu, 4 Dec 2003 13:05:02 -0700 (MST)
  • RE: Angle in Bending Thu, 4 Dec 2003 13:15:51 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 11:32:17 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Mon, 8 Dec 2003 12:22:07 -0700 (MST)
  • RE: Looking for a Wi-Fi PDA Tue, 9 Dec 2003 11:19:21 -0700 (MST)

• yilmaz yuva
  • fema 356 foundation acceptability Sat, 8 Nov 2003 03:05:12 -0700 (MST)

• Zhoub002
  • Re[2]: Rebar Welding Tue, 4 Nov 2003 11:44:54 -0700 (MST)

---

Mail converted by MHonArc