SEAINT

 

INTRO

 

SEARCH
ARCHIVE

 

NEED
A BOOK?

 

2010
Jan-Mar
Apr-Jun
Jul-Sep

 

2009
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2008
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2007
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2006
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2005
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2004
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2003
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2002
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2001
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

2000
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1999
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1998
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

1997
Jan-Jun
Jul-Sep
Oct-Dec

1996
Jan-Jun
Jul-Dec

 

1995
Jul-Dec

 

HOME

Some recommendations...
 
 

 
 

---

SEAINT Mail Archive 2007 (Oct-Dec)

Civil and Structural Engineering discussions by subject

www.seaintarchive.org

• Home / Site Index
• Messages sorted by: [Thread] [Author] [Date]

Need a book? Civil and Structural Engineering book recommendations...
 

---

Messages: 1389

• [no subject]
  • hossein mardanlo Sat, 10 Nov 2007 14:29:39 -0700
  • hossein mardanlo Sat, 10 Nov 2007 14:40:11 -0700

• Re: 11 x 17 copiers / scanners (was 12 x 18 printers)
  • jerold taylor Tue, 30 Oct 2007 19:33:30 -0600
  • Gary L. Hodgson and Assoc. Wed, 31 Oct 2007 06:01:34 -0600
  • jerold taylor Wed, 31 Oct 2007 06:38:07 -0600
  • Gary L. Hodgson and Assoc. Thu, 1 Nov 2007 05:36:23 -0600

• 12 x 18 printers
  • Jeff Smith Tue, 30 Oct 2007 11:49:36 -0600
  • FSRahbar Tue, 30 Oct 2007 12:16:13 -0600
  • Shaun Dustin Tue, 30 Oct 2007 17:27:36 -0600
  • Bill Allen Tue, 30 Oct 2007 18:18:11 -0600
  • Jeff Smith Tue, 30 Oct 2007 23:27:40 -0600
  • Shaun Dustin Tue, 30 Oct 2007 23:58:50 -0600
  • Gary L. Hodgson and Assoc. Wed, 31 Oct 2007 05:40:49 -0600
  • Jerry Coombs Wed, 31 Oct 2007 10:29:51 -0600
  • Daryl Richardson Wed, 31 Oct 2007 10:42:27 -0600
  • Gary L. Hodgson and Assoc. Thu, 1 Nov 2007 05:45:58 -0600

• 2006 IBC vs 2003 NEHRP
  • Mark Johnson Tue, 16 Oct 2007 13:28:07 -0600
  • Scott Maxwell Tue, 16 Oct 2007 15:42:20 -0600
  • Tom . Hunt Tue, 16 Oct 2007 15:58:27 -0600
  • Mark Johnson Tue, 16 Oct 2007 22:10:48 -0600
  • Harold Sprague Wed, 17 Oct 2007 14:02:13 -0600
  • Mark Johnson Thu, 18 Oct 2007 16:32:15 -0600

• 2006 IBC WIND ANALYSIS Question
  • Ed Najjarine, SE Fri, 16 Nov 2007 13:27:18 -0700
  • Jason Christensen Fri, 16 Nov 2007 13:36:07 -0700
  • Ed Najjarine, SE Sat, 17 Nov 2007 15:34:08 -0700
  • David Topete Mon, 19 Nov 2007 09:42:57 -0700

• 2008 Los Angeles Building Code
  • Paul Blomberg Wed, 26 Dec 2007 08:39:18 -0700
  • Paul Blomberg Wed, 26 Dec 2007 16:33:47 -0700
  • DA ENGINEERING Wed, 26 Dec 2007 16:47:27 -0700

• 3D model with metal deck diaphragm
  • William.Sherman Mon, 8 Oct 2007 13:28:38 -0600
  • Alex C. Nacionales Tue, 9 Oct 2007 19:10:29 -0600
  • SE California Tue, 16 Oct 2007 09:49:49 -0600
  • Stuart, Matthew Tue, 16 Oct 2007 10:05:53 -0600

• 64 bit computers systems
  • Jason Christensen Mon, 29 Oct 2007 10:19:40 -0600
  • Bill Polhemus Mon, 29 Oct 2007 12:58:57 -0600
  • Jason Christensen Mon, 29 Oct 2007 13:10:47 -0600
  • Scott Maxwell Mon, 29 Oct 2007 13:48:27 -0600
  • Jason Christensen Mon, 29 Oct 2007 14:11:04 -0600
  • Bill Allen Mon, 29 Oct 2007 15:37:20 -0600
  • Jason Christensen Mon, 29 Oct 2007 15:55:37 -0600
  • Bill Polhemus Mon, 29 Oct 2007 15:59:49 -0600
  • Bill Polhemus Mon, 29 Oct 2007 16:05:19 -0600
  • Bill Polhemus Mon, 29 Oct 2007 16:20:50 -0600
  • Scott Maxwell Mon, 29 Oct 2007 16:26:35 -0600
  • Jason Christensen Mon, 29 Oct 2007 16:42:35 -0600
  • Bill Polhemus Mon, 29 Oct 2007 18:31:05 -0600
  • Josh Plummer Mon, 29 Oct 2007 20:38:55 -0600
  • Bill Polhemus Mon, 29 Oct 2007 21:21:38 -0600
  • Josh Plummer Tue, 30 Oct 2007 08:51:00 -0600
  • Jason Christensen Tue, 30 Oct 2007 09:15:49 -0600
  • Bill Polhemus Tue, 30 Oct 2007 17:44:18 -0600
  • Truitt Vance Wed, 31 Oct 2007 09:21:08 -0600
  • Josh Plummer Thu, 1 Nov 2007 07:30:53 -0600
  • Bill Polhemus Tue, 20 Nov 2007 18:06:30 -0700

• 8" COLUMNS
  • refugio rochin Fri, 5 Oct 2007 08:32:55 -0600

• 8" Columns
  • refugio rochin Fri, 5 Oct 2007 08:35:14 -0600
  • Gerard Madden, SE Fri, 5 Oct 2007 10:49:19 -0600
  • refugio rochin Fri, 5 Oct 2007 11:20:42 -0600
  • David Fisher Fri, 5 Oct 2007 11:24:00 -0600
  • Scott Maxwell Fri, 5 Oct 2007 13:16:01 -0600
  • Alex C. Nacionales Fri, 5 Oct 2007 17:25:03 -0600
  • Alex C. Nacionales Fri, 5 Oct 2007 17:39:25 -0600
  • Gerard Madden, SE Sat, 6 Oct 2007 00:23:04 -0600
  • Daniel Popp Sat, 6 Oct 2007 02:30:28 -0600
  • Alex C. Nacionales Sat, 6 Oct 2007 11:09:34 -0600
  • refugio rochin Wed, 31 Oct 2007 08:21:26 -0600
  • Tom . Hunt Wed, 31 Oct 2007 08:38:07 -0600

• Re: Conventional Light Framed Construction Vs. Engineered Building  [Another View]
  • Rhkratzse Mon, 22 Oct 2007 09:55:33 -0600

• [Fwd: VisualAnalysis 6.0 FREE Training Sessions]
  • Bill Polhemus Tue, 16 Oct 2007 15:48:13 -0600

• RE: [SPAM] paid for release of CAD files to subs...
  • Donald Bruckman Mon, 22 Oct 2007 15:01:30 -0600

• A3 Laser printers
  • Shiraz Shahid Sun, 4 Nov 2007 09:46:57 -0700
  • Jordan Truesdell, PE Sun, 4 Nov 2007 12:03:53 -0700
  • Christopher Wright Sun, 4 Nov 2007 16:51:29 -0700
  • rowyz Sun, 4 Nov 2007 17:27:30 -0700
  • Shiraz Shahid Mon, 5 Nov 2007 11:11:44 -0700
  • Jordan Truesdell, PE Fri, 9 Nov 2007 17:04:29 -0700

• ADAPT or POSTEN ??
  • Stan Caldwell Fri, 16 Nov 2007 16:27:28 -0700
  • Daniel Popp Fri, 16 Nov 2007 18:27:30 -0700
  • Paul Feather Sat, 17 Nov 2007 11:55:14 -0700
  • Gil Brock Sun, 18 Nov 2007 16:57:51 -0700

• Adding Storefront to Existing CMU Wall
  • Rich Lewis Tue, 13 Nov 2007 21:15:55 -0700
  • Donald Bruckman Wed, 14 Nov 2007 09:36:54 -0700
  • Jerry Coombs Wed, 14 Nov 2007 11:02:28 -0700

• Address to Lat/Long Converter
  • Mark Johnson Thu, 20 Dec 2007 12:16:02 -0700
  • Thor Tandy Thu, 20 Dec 2007 12:23:07 -0700

• Ahkam Syahril is out of the office.
  • Ahkam Syahril Fri, 12 Oct 2007 03:02:30 -0600

• AISC Prequalified Connection Provisions
  • Mark Deardorff Wed, 31 Oct 2007 09:16:14 -0600
  • Tom . Hunt Wed, 31 Oct 2007 09:26:15 -0600
  • Mark Deardorff Wed, 31 Oct 2007 09:43:08 -0600
  • Tom . Hunt Wed, 31 Oct 2007 10:25:28 -0600

• AISC Seismic Provisions
  • Mark Deardorff Tue, 30 Oct 2007 16:42:04 -0600
  • Ben Yousefi Tue, 30 Oct 2007 17:02:28 -0600
  • Tom . Hunt Tue, 30 Oct 2007 17:15:28 -0600

• AISC Table X (9th Ed.) or Table 10-9a (13th Ed.)
  • Bill Allen Fri, 5 Oct 2007 13:14:12 -0600
  • Mark Deardorff Fri, 5 Oct 2007 16:19:39 -0600
  • Abolhassan Astaneh-Asl Sun, 7 Oct 2007 23:37:44 -0600
  • Bill Allen Mon, 8 Oct 2007 09:24:17 -0600
  • Gerard Madden, SE Mon, 8 Oct 2007 13:36:55 -0600
  • Gerard Madden, SE Mon, 8 Oct 2007 14:02:24 -0600
  • Kipp Martin Tue, 9 Oct 2007 08:28:55 -0600
  • Jim Persing Thu, 11 Oct 2007 15:26:19 -0600
  • Gerard Madden, SE Thu, 11 Oct 2007 15:37:52 -0600

• Alternate Braced Walls and SDC D
  • garyg Sat, 8 Dec 2007 17:08:54 -0700
  • Acharya, Suresh Mon, 10 Dec 2007 10:20:44 -0700
  • Ehrlich, Gary Tue, 18 Dec 2007 06:55:10 -0700

• alternative energy - non-political but off topic
  • Andrew Kester, P.E. Fri, 2 Nov 2007 12:40:37 -0600
  • Bill Polhemus Sun, 4 Nov 2007 20:16:11 -0700
  • Christopher Wright Sun, 4 Nov 2007 20:28:46 -0700
  • Bill Allen Sun, 4 Nov 2007 20:42:19 -0700

• Anchor Shear Shear Capacity in Reinforced Concrete
  • M. David Finley, P.E., P.A. Mon, 29 Oct 2007 14:42:34 -0600
  • Haan, Scott M POA Mon, 29 Oct 2007 15:22:03 -0600
  • Tom . Hunt Mon, 29 Oct 2007 15:26:48 -0600
  • Gary Loomis Mon, 29 Oct 2007 16:00:45 -0600
  • Tom . Hunt Mon, 29 Oct 2007 16:31:44 -0600
  • Scott Maxwell Mon, 29 Oct 2007 17:34:35 -0600

• Anchorage to concrete
  • John Buchanan Wed, 7 Nov 2007 10:15:13 -0700
  • Jim Persing Wed, 7 Nov 2007 23:25:35 -0700

• Announcement of a Seminar on Blast Protection of Bridges
  • Abolhassan Astaneh-Asl Mon, 1 Oct 2007 02:59:53 -0600

• Another Wind Question
  • Doug Mayer Tue, 27 Nov 2007 12:38:09 -0700
  • Mark Pemberton Tue, 27 Nov 2007 14:53:39 -0700

• Anyone have SAG10, or know someone?
  • Jordan Truesdell, PE Mon, 5 Nov 2007 06:28:22 -0700

• Architects!
  • Bill Allen Wed, 12 Dec 2007 08:04:11 -0700
  • David Fisher Wed, 12 Dec 2007 08:47:32 -0700
  • Donald Bruckman Wed, 12 Dec 2007 09:36:10 -0700
  • ASLCSE Wed, 12 Dec 2007 10:37:18 -0700
  • jascopac Wed, 12 Dec 2007 14:57:40 -0700
  • GRUPO CG Thu, 13 Dec 2007 11:29:16 -0700
  • David Fisher Thu, 13 Dec 2007 13:09:38 -0700

• ASCE and its New Orleans Levees Failure Investigation
  • Abolhassan Astaneh-Asl Fri, 14 Dec 2007 11:27:41 -0700

• ASCE 7-05
  • Mark Deardorff Fri, 19 Oct 2007 10:35:44 -0600
  • Mark Deardorff Fri, 19 Oct 2007 10:47:31 -0600
  • Garner, Robert Fri, 19 Oct 2007 11:55:21 -0600
  • Mark Deardorff Fri, 19 Oct 2007 12:13:35 -0600
  • Gary L. Hodgson and Assoc. Sat, 20 Oct 2007 07:24:26 -0600
  • Paul Ransom Sat, 20 Oct 2007 10:08:07 -0600
  • Christopher Wright Sat, 20 Oct 2007 10:19:25 -0600
  • Gary L. Hodgson and Assoc. Mon, 22 Oct 2007 06:03:34 -0600
  • Garner, Robert Mon, 22 Oct 2007 08:28:10 -0600
  • Christopher Wright Mon, 22 Oct 2007 09:01:01 -0600
  • Scott, William N Mon, 22 Oct 2007 09:54:51 -0600
  • Rhkratzse Mon, 22 Oct 2007 10:11:33 -0600
  • smaxwell Mon, 22 Oct 2007 16:34:02 -0600
  • smaxwell Mon, 22 Oct 2007 16:35:16 -0600
  • Haan, Scott M POA Mon, 22 Oct 2007 16:55:10 -0600
  • Scott Maxwell Mon, 22 Oct 2007 17:06:02 -0600
  • Haan, Scott M POA Mon, 22 Oct 2007 17:15:13 -0600
  • Charles R. Ashley Jr. Tue, 23 Oct 2007 09:16:13 -0600
  • refugio rochin Tue, 23 Oct 2007 09:25:29 -0600
  • Brian K. Smith Tue, 23 Oct 2007 09:47:02 -0600
  • Christopher Wright Tue, 23 Oct 2007 10:30:04 -0600
  • Haan, Scott M POA Tue, 23 Oct 2007 11:40:46 -0600
  • Scott, William N Tue, 23 Oct 2007 11:49:50 -0600
  • Haan, Scott M POA Tue, 23 Oct 2007 12:16:08 -0600
  • Mike Jones Tue, 23 Oct 2007 12:26:44 -0600
  • Scott, William N Tue, 23 Oct 2007 12:47:19 -0600
  • Freeman Tang Tue, 23 Oct 2007 13:20:57 -0600
  • Doug Mayer Tue, 23 Oct 2007 13:46:59 -0600
  • Haan, Scott M POA Tue, 23 Oct 2007 13:52:40 -0600
  • Scott Maxwell Tue, 23 Oct 2007 13:59:31 -0600
  • Drew Morris Tue, 23 Oct 2007 14:02:11 -0600
  • Freeman Tang Tue, 23 Oct 2007 14:10:57 -0600
  • Freeman Tang Tue, 23 Oct 2007 14:39:17 -0600
  • Gary L. Hodgson and Assoc. Wed, 24 Oct 2007 06:10:25 -0600
  • Ehrlich, Gary Thu, 25 Oct 2007 11:20:39 -0600
  • Ehrlich, Gary Thu, 25 Oct 2007 11:22:42 -0600
  • Ehrlich, Gary Thu, 25 Oct 2007 11:23:00 -0600
  • ndz28 Sun, 28 Oct 2007 23:15:57 -0600
  • Jerry Coombs Mon, 29 Oct 2007 06:26:37 -0600

• ASCE 7-05 Wind
  • Doug Mayer Tue, 20 Nov 2007 19:42:25 -0700
  • Bill Polhemus Tue, 20 Nov 2007 20:10:58 -0700
  • WISH DENNIS Tue, 20 Nov 2007 20:51:16 -0700
  • WISH DENNIS Tue, 20 Nov 2007 20:52:17 -0700
  • Ralph Kratz Tue, 20 Nov 2007 21:31:52 -0700
  • Scott Maxwell Tue, 20 Nov 2007 22:18:50 -0700
  • Jordan Truesdell, PE Wed, 21 Nov 2007 10:16:27 -0700
  • WISH DENNIS Wed, 21 Nov 2007 14:55:41 -0700
  • Neil Moore Wed, 21 Nov 2007 16:30:44 -0700
  • WISH DENNIS Wed, 21 Nov 2007 18:00:04 -0700
  • Jordan Truesdell, PE Wed, 21 Nov 2007 18:30:02 -0700
  • Scott Maxwell Thu, 22 Nov 2007 10:00:01 -0700

• RE: ASCE 7-05 Wind (Regular & Orthogonal)
  • Christopher Banbury Mon, 26 Nov 2007 08:26:30 -0700

• RE: ASCE 7-05 Wind example
  • Neil Moore Thu, 29 Nov 2007 09:42:20 -0700

• ASCE7 Question
  • Alden Manipula Wed, 19 Dec 2007 14:02:59 -0700
  • Micayas, Julius Wed, 19 Dec 2007 14:27:34 -0700

• RE: ASCE7-05 redundancy factor and wall design for Out-of-plane f orces
  • Acharya, Suresh Thu, 13 Dec 2007 12:40:35 -0700

• ASCE7-05 redundancy factor and wall design for Out-of-plane forces
  • OSCAR HENRIQUEZ Thu, 13 Dec 2007 12:12:05 -0700
  • Paul Feather Thu, 13 Dec 2007 12:24:42 -0700

• Autocad Bold Chisel Hand Lettering Font
  • Dennis Wish Sat, 13 Oct 2007 18:09:11 -0600

• AVAILABILITY OF DISTANCE LEARNING COURSES
  • ASC Mon, 17 Dec 2007 03:49:30 -0700
  • Conrad Harrison Mon, 17 Dec 2007 18:07:22 -0700
  • Conrad Harrison Wed, 19 Dec 2007 21:58:34 -0700
  • AWC Info Thu, 20 Dec 2007 07:09:08 -0700

• AW: AW: footings look too big
  • alfred mueller Mon, 5 Nov 2007 01:24:52 -0700

• AW: Best Wishes
  • Alfred Müller Sun, 23 Dec 2007 04:14:58 -0700

• AW: Boring through GLBs
  • alfred mueller Sun, 9 Dec 2007 13:11:43 -0700
  • IRV FRUCHTMAN Sun, 9 Dec 2007 16:28:27 -0700

• AW: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top)
  • alfred mueller Tue, 9 Oct 2007 01:17:32 -0600

• AW: cold form steel truss fire damage
  • alfred mueller Thu, 1 Nov 2007 09:25:37 -0600

• AW: footings look too big
  • alfred mueller Sat, 3 Nov 2007 05:32:14 -0600
  • alfred mueller Sun, 4 Nov 2007 10:28:08 -0700
  • Christopher Wright Sun, 4 Nov 2007 18:48:41 -0700

• AW: Openings in concrete beams
  • alfred mueller Sat, 8 Dec 2007 02:01:42 -0700

• AW: question my authority???!
  • alfred mueller Mon, 5 Nov 2007 06:56:29 -0700

• Basic Roof Diaph. Question
  • Andrew Kester, P.E. Mon, 17 Dec 2007 15:25:49 -0700
  • Stuart, Matthew Mon, 17 Dec 2007 15:57:45 -0700
  • Gerard Madden, SE Mon, 17 Dec 2007 16:10:13 -0700
  • Kevin Below Mon, 17 Dec 2007 18:57:33 -0700
  • Haan, Scott M POA Mon, 17 Dec 2007 19:06:23 -0700
  • Conrad Harrison Mon, 17 Dec 2007 19:42:35 -0700
  • Dmitri Wright Tue, 18 Dec 2007 07:34:13 -0700

• Beam End Condition- When rests on Shear wall.
  • Samiappan Srinivasan Fri, 2 Nov 2007 22:47:19 -0600

• Best Wishes
  • Daryl Richardson Sat, 22 Dec 2007 12:10:50 -0700

• Bethlehem Steel Building Case Histories
  • Stuart, Matthew Wed, 12 Dec 2007 07:40:51 -0700
  • Stuart, Matthew Wed, 12 Dec 2007 08:02:37 -0700
  • Jim Wilson Mon, 17 Dec 2007 06:22:33 -0700
  • Stuart, Matthew Mon, 17 Dec 2007 06:28:39 -0700

• Bill Polhemus, that was a cheap shot
  • Shaun Dustin Wed, 31 Oct 2007 22:21:12 -0600
  • Michel Wed, 31 Oct 2007 22:28:27 -0600
  • Bill Polhemus Thu, 1 Nov 2007 05:17:16 -0600
  • Scott Maxwell Thu, 1 Nov 2007 08:45:48 -0600
  • Jimenez, Jorge A. Thu, 1 Nov 2007 08:55:33 -0600
  • Robert Kazanjy Thu, 1 Nov 2007 09:32:30 -0600
  • Daryl Richardson Thu, 1 Nov 2007 09:50:09 -0600
  • Bill Polhemus Thu, 1 Nov 2007 11:33:44 -0600
  • Truitt Vance Thu, 1 Nov 2007 11:46:29 -0600
  • Scott Maxwell Thu, 1 Nov 2007 12:06:14 -0600
  • Haan, Scott M POA Thu, 1 Nov 2007 12:16:47 -0600
  • David Fisher Thu, 1 Nov 2007 12:36:22 -0600
  • Robert Kazanjy Thu, 1 Nov 2007 12:51:19 -0600
  • Haan, Scott M POA Thu, 1 Nov 2007 13:17:03 -0600
  • Bill Polhemus Thu, 1 Nov 2007 13:24:50 -0600
  • David Fisher Thu, 1 Nov 2007 13:39:23 -0600
  • David Fisher Fri, 2 Nov 2007 08:25:56 -0600

• Biofuels
  • Shaun Dustin Thu, 1 Nov 2007 09:22:58 -0600
  • Christopher Wright Thu, 1 Nov 2007 10:26:49 -0600
  • Bill Polhemus Thu, 1 Nov 2007 11:56:34 -0600

• biofuels and further off-topic
  • Bob Freeman Thu, 1 Nov 2007 12:41:29 -0600
  • Haan, Scott M POA Thu, 1 Nov 2007 12:56:08 -0600
  • Drew Morris Thu, 1 Nov 2007 14:17:51 -0600
  • Bill Polhemus Thu, 1 Nov 2007 14:36:35 -0600
  • Haan, Scott M POA Thu, 1 Nov 2007 14:56:43 -0600
  • Haan, Scott M POA Thu, 1 Nov 2007 15:03:06 -0600
  • David Topete Thu, 1 Nov 2007 15:13:13 -0600
  • Scott Maxwell Thu, 1 Nov 2007 15:30:32 -0600
  • Haan, Scott M POA Thu, 1 Nov 2007 15:32:23 -0600
  • David Topete Thu, 1 Nov 2007 15:48:26 -0600
  • Larry Bryant Thu, 1 Nov 2007 17:03:08 -0600
  • Scott Maxwell Thu, 1 Nov 2007 18:52:26 -0600

• Re: biofuels and further offfffff-topic
  • Rhkratzse Thu, 1 Nov 2007 14:07:20 -0600
  • M. David Finley, P.E., P.A. Thu, 1 Nov 2007 14:23:14 -0600
  • Gerard Madden, SE Thu, 1 Nov 2007 14:24:24 -0600
  • Rhkratzse Thu, 1 Nov 2007 14:28:27 -0600
  • Bill Polhemus Thu, 1 Nov 2007 14:32:06 -0600
  • Bill Allen Thu, 1 Nov 2007 14:40:39 -0600

• biofuels and off-topic
  • Bob Freeman Thu, 1 Nov 2007 16:14:10 -0600

• BLACK BOX SUPPORTED STRUCTURE
  • ASC Sat, 24 Nov 2007 15:36:38 -0700
  • Nels Roselund Sat, 24 Nov 2007 19:00:11 -0700

• Boring through GLBs
  • Donald Bruckman Sat, 8 Dec 2007 10:02:07 -0700
  • Jeff Smith Sat, 8 Dec 2007 11:11:23 -0700
  • sscholl2(--nospam--at)juno.com Sun, 9 Dec 2007 15:54:17 -0700
  • Jerry Coombs Mon, 10 Dec 2007 06:55:18 -0700

• Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318)
  • Sanjay Verma Thu, 11 Oct 2007 12:03:28 -0600
  • Gerard Madden, SE Thu, 11 Oct 2007 12:33:14 -0600
  • Sanjay Verma Thu, 11 Oct 2007 12:54:45 -0600
  • bart Thu, 11 Oct 2007 14:52:43 -0600
  • Sanjay Verma Thu, 11 Oct 2007 17:03:16 -0600

• RE: Building codes in Dubai, UAE
  • Sunil Thengale Mon, 1 Oct 2007 01:45:55 -0600

• CA & WA SE reciprocity
  • Sushil Chauhan Fri, 23 Nov 2007 07:50:51 -0700
  • Jake Watson Fri, 23 Nov 2007 11:39:53 -0700
  • Scott Maxwell Sat, 24 Nov 2007 11:36:16 -0700
  • Jake Watson Sat, 24 Nov 2007 14:27:47 -0700
  • Scott Maxwell Sat, 24 Nov 2007 19:57:03 -0700
  • Garner, Robert Mon, 26 Nov 2007 08:24:59 -0700
  • Brad Connelly Mon, 26 Nov 2007 12:18:14 -0700
  • Scott Maxwell Mon, 26 Nov 2007 12:49:19 -0700
  • Kipp Martin Tue, 27 Nov 2007 14:28:34 -0700

• CA Licensure
  • Jeremy Salmon Thu, 6 Dec 2007 19:07:30 -0700
  • Gerard Madden, SE Thu, 6 Dec 2007 23:26:55 -0700
  • Scott Maxwell Fri, 7 Dec 2007 01:52:52 -0700
  • Scott, William N Fri, 7 Dec 2007 09:46:53 -0700

• RE: CAD files
  • Rick Stone Wed, 24 Oct 2007 10:28:10 -0600

• CAD: AutoCAD Revit Structure Suite 2008
  • Bill Polhemus Tue, 16 Oct 2007 15:51:39 -0600
  • Jeremy White Tue, 16 Oct 2007 17:16:43 -0600
  • Donald Bruckman Wed, 17 Oct 2007 11:30:25 -0600
  • Jeremy White Wed, 17 Oct 2007 11:54:23 -0600
  • t.w.allen Wed, 17 Oct 2007 12:26:18 -0600

• California Building Code and the 2006 IBC
  • Andre Sidler Tue, 6 Nov 2007 15:24:36 -0700
  • Donald Bruckman Tue, 6 Nov 2007 15:33:25 -0700
  • Tom . Hunt Tue, 6 Nov 2007 15:39:17 -0700
  • Jeff Smith Tue, 6 Nov 2007 15:46:43 -0700
  • Acharya, Suresh Tue, 6 Nov 2007 16:26:22 -0700
  • ASLCSE Fri, 16 Nov 2007 17:04:43 -0700

• California PE/SE References
  • Brian S Bossley Thu, 25 Oct 2007 10:48:40 -0600
  • Mark Deardorff Thu, 25 Oct 2007 11:01:54 -0600
  • Steve Gordin Thu, 25 Oct 2007 11:05:07 -0600
  • Scott Maxwell Thu, 25 Oct 2007 19:28:20 -0600
  • Brian S Bossley Sat, 27 Oct 2007 19:28:08 -0600

• Cantilevered Retaining Wall - Footings are Definately Too Big
  • Michel Tue, 6 Nov 2007 18:39:01 -0700
  • Jordan Truesdell, PE Tue, 6 Nov 2007 19:20:14 -0700

• Cantilevered Retaining Wall - Rule of Thumb
  • Michel Sun, 4 Nov 2007 20:55:22 -0700
  • Lakhani, Sid Sun, 4 Nov 2007 21:22:56 -0700
  • Jeff Smith Sun, 4 Nov 2007 21:24:17 -0700
  • Jordan Truesdell, PE Mon, 5 Nov 2007 05:53:32 -0700
  • Daryl Richardson Mon, 5 Nov 2007 10:06:05 -0700
  • Garner, Robert Mon, 5 Nov 2007 10:52:33 -0700
  • Roger Davis Mon, 26 Nov 2007 09:24:01 -0700
  • Bill Allen Mon, 26 Nov 2007 10:08:18 -0700
  • Jordan Truesdell, PE Mon, 26 Nov 2007 10:25:12 -0700
  • Roger Davis Mon, 26 Nov 2007 12:50:49 -0700
  • Christopher Wright Mon, 26 Nov 2007 21:38:31 -0700
  • Conrad Harrison Mon, 26 Nov 2007 21:51:27 -0700
  • Christopher Wright Mon, 26 Nov 2007 22:18:16 -0700
  • Conrad Harrison Mon, 26 Nov 2007 23:43:27 -0700
  • Christopher Wright Mon, 26 Nov 2007 23:57:02 -0700
  • Bill Allen Tue, 27 Nov 2007 08:18:35 -0700
  • Daryl Richardson Tue, 27 Nov 2007 11:53:36 -0700
  • Drew Morris Tue, 27 Nov 2007 12:25:32 -0700
  • Christopher Wright Tue, 27 Nov 2007 12:54:32 -0700
  • Roger Davis Thu, 29 Nov 2007 08:48:37 -0700

• CBC 2007 Seminar (free)
  • Joseph Harouni Mon, 3 Dec 2007 18:00:48 -0700

• CBC 2007 Wind Load
  • Gerard Madden, SE Tue, 18 Dec 2007 17:48:51 -0700
  • Conrad Harrison Tue, 18 Dec 2007 18:33:30 -0700
  • Scott Maxwell Tue, 18 Dec 2007 23:11:53 -0700
  • Gerard Madden, SE Wed, 19 Dec 2007 00:22:43 -0700
  • Scott Maxwell Wed, 19 Dec 2007 06:46:45 -0700
  • Jim Getaz Wed, 19 Dec 2007 07:37:39 -0700
  • Dmitri Wright Wed, 19 Dec 2007 10:15:15 -0700
  • Gerard Madden, SE Wed, 19 Dec 2007 10:55:56 -0700
  • Adam Vakiener Fri, 21 Dec 2007 13:50:05 -0700
  • David Topete Fri, 21 Dec 2007 14:02:14 -0700
  • Jerry Coombs Fri, 21 Dec 2007 14:23:28 -0700
  • Scott Maxwell Fri, 21 Dec 2007 16:45:48 -0700

• RE: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top)
  • Garner, Robert Mon, 8 Oct 2007 11:33:37 -0600

• Re: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top)
  • Christopher Wright Mon, 8 Oct 2007 12:32:15 -0600

• Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top)
  • Sanjay Verma Mon, 8 Oct 2007 11:00:55 -0600
  • Tom . Hunt Mon, 8 Oct 2007 11:21:39 -0600
  • Gary Loomis Mon, 8 Oct 2007 11:45:14 -0600
  • Christopher Wright Mon, 8 Oct 2007 12:30:24 -0600
  • G Vishwanath Tue, 9 Oct 2007 02:21:47 -0600
  • Gary L. Hodgson and Assoc. Tue, 9 Oct 2007 06:03:43 -0600

• RE: Choice between intermittent and continuous fillet weld in Crane girder( I beam with channel top)
  • William.Sherman Mon, 8 Oct 2007 11:52:54 -0600

• Circa 80's Walmart construction
  • Rich Lewis Tue, 13 Nov 2007 21:16:32 -0700
  • Bill Polhemus Wed, 14 Nov 2007 04:48:00 -0700

• CO Snow Loads
  • Eric Tompos Sat, 3 Nov 2007 12:46:56 -0600
  • Adjebli Sat, 3 Nov 2007 13:52:27 -0600

• CODE: Wind Loading at Lower Wind Speeds?
  • Bill Polhemus Thu, 1 Nov 2007 10:52:54 -0600
  • Scott, William N Thu, 1 Nov 2007 11:02:51 -0600
  • ECVAl3 Fri, 2 Nov 2007 11:22:30 -0600

• Cofar metal decking
  • Drew Morris Tue, 13 Nov 2007 16:01:33 -0700
  • Harold Sprague Wed, 14 Nov 2007 15:22:17 -0700

• cold form steel truss fire damage
  • Christopher Banbury Mon, 29 Oct 2007 13:59:32 -0600

• concrete drop panels
  • refugio rochin Tue, 9 Oct 2007 07:54:42 -0600
  • Mark Deardorff Tue, 9 Oct 2007 08:26:58 -0600
  • refugio rochin Tue, 9 Oct 2007 09:05:08 -0600
  • Mark Deardorff Tue, 9 Oct 2007 09:14:32 -0600
  • bart Tue, 9 Oct 2007 13:00:32 -0600
  • bart Tue, 9 Oct 2007 14:18:43 -0600
  • Scott Maxwell Tue, 9 Oct 2007 14:31:25 -0600
  • refugio rochin Tue, 9 Oct 2007 14:44:55 -0600
  • Joseph R. Grill Tue, 9 Oct 2007 21:11:43 -0600

• Concrete seminar in southern California
  • Ben Yousefi Wed, 28 Nov 2007 16:48:57 -0700
  • Tom . Hunt Wed, 28 Nov 2007 17:16:16 -0700

• Connections between timber batterns/purlins with concrete slab
  • Murvin Ragaven Mon, 10 Dec 2007 21:29:46 -0700
  • Conrad Harrison Mon, 10 Dec 2007 22:48:58 -0700
  • Murvin Ragaven Tue, 11 Dec 2007 04:44:51 -0700

• Construction Per Square Foot Cost
  • Michel Blangy Mon, 12 Nov 2007 14:41:08 -0700
  • Mark Deardorff Mon, 12 Nov 2007 14:50:10 -0700
  • Michel Blangy Mon, 12 Nov 2007 14:54:01 -0700
  • Gerard Madden, SE Mon, 12 Nov 2007 15:05:05 -0700

• Contec AAC
  • Chris Slater Fri, 28 Dec 2007 10:33:45 -0700
  • Ralph Kratz Fri, 28 Dec 2007 10:57:42 -0700
  • Scott, William N Fri, 28 Dec 2007 11:00:35 -0700
  • Daryl Richardson Fri, 28 Dec 2007 11:56:56 -0700
  • Harold Sprague Fri, 28 Dec 2007 16:14:07 -0700
  • Nels Roselund Fri, 28 Dec 2007 16:26:36 -0700
  • Scott Maxwell Sat, 29 Dec 2007 10:43:58 -0700

• Re: Conventional Light Framed Construction ... an aside
  • Paul Ransom Tue, 23 Oct 2007 19:45:59 -0600

• Conventional Light Framed Construction Vs. Engineered Building
  • Guadalupe Rivera Fri, 19 Oct 2007 16:00:41 -0600
  • Andy Heigley Mon, 22 Oct 2007 06:07:25 -0600

• Re: Conventional Light Framed Construction Vs. Engineered Building [Another View]
  • Rhkratzse Mon, 22 Oct 2007 09:31:03 -0600
  • Christopher Wright Mon, 22 Oct 2007 09:49:35 -0600
  • Chuck Utzman Mon, 22 Oct 2007 11:04:39 -0600
  • Gary L. Hodgson and Assoc. Tue, 23 Oct 2007 05:43:30 -0600

• Re: Conventional Light Framed Construction Vs. Engineered Building [Another View]
  • Rhkratzse Mon, 22 Oct 2007 11:13:14 -0600

• Design Examples
  • Dave Adams Wed, 26 Dec 2007 09:53:07 -0700
  • Harold Sprague Wed, 26 Dec 2007 11:10:44 -0700
  • Jim Getaz Thu, 27 Dec 2007 05:54:44 -0700
  • Jordan Truesdell, PE Fri, 28 Dec 2007 05:34:00 -0700
  • Mark Johnson Fri, 28 Dec 2007 10:32:46 -0700
  • Ralph Kratz Fri, 28 Dec 2007 10:58:55 -0700
  • Mark Johnson Fri, 28 Dec 2007 15:14:38 -0700
  • Scott Maxwell Sat, 29 Dec 2007 10:13:59 -0700

• Design of Pavement Section
  • Bill Allen Thu, 20 Dec 2007 14:28:14 -0700
  • Jnapd Thu, 20 Dec 2007 14:34:41 -0700
  • Bill Allen Thu, 20 Dec 2007 14:48:12 -0700
  • Jnapd Thu, 20 Dec 2007 14:54:11 -0700
  • Tom . Hunt Thu, 20 Dec 2007 15:00:59 -0700
  • Gary Loomis Thu, 20 Dec 2007 15:14:18 -0700
  • Scott, William N Thu, 20 Dec 2007 15:15:41 -0700
  • sscholl2(--nospam--at)juno.com Thu, 20 Dec 2007 23:37:46 -0700
  • Bill Allen Fri, 21 Dec 2007 08:19:08 -0700
  • Lloyd Pack Fri, 21 Dec 2007 10:50:01 -0700
  • Henry Fairbairn Fri, 28 Dec 2007 16:14:49 -0700

• DESIGN PROGRAMS FOR NEW CODE
  • DA Tue, 30 Oct 2007 10:41:18 -0600
  • Bill Allen Tue, 30 Oct 2007 10:59:34 -0600
  • Bill Polhemus Tue, 30 Oct 2007 12:36:55 -0600
  • Scott Maxwell Tue, 30 Oct 2007 17:52:14 -0600
  • Robert Jonkman Wed, 31 Oct 2007 07:47:32 -0600
  • Michael Brooks Wed, 31 Oct 2007 11:56:03 -0600
  • Gerard Madden, SE Wed, 31 Oct 2007 12:17:37 -0600
  • erik gibbs Thu, 1 Nov 2007 20:34:42 -0600
  • Scott Maxwell Thu, 1 Nov 2007 21:44:57 -0600
  • ASLCSE Fri, 16 Nov 2007 16:38:31 -0700

• Detailing
  • Gdrafting gdrafting Mon, 5 Nov 2007 21:33:22 -0700

• DSTV and Peddimat
  • G Vishwanath Thu, 18 Oct 2007 07:55:46 -0600

• Dynamic earth pressure increment in a Concrete box Structure 40 ft below grade
  • Sanjay Verma Thu, 1 Nov 2007 15:26:01 -0600

• E-Defense Blind Analysis Contest Results
  • Harold Sprague Thu, 27 Dec 2007 11:06:47 -0700

• Earthquake-Proof Design
  • Donald Bruckman Fri, 2 Nov 2007 09:52:35 -0600
  • Rhkratzse Fri, 2 Nov 2007 10:04:07 -0600
  • Neil Moore Fri, 2 Nov 2007 10:17:10 -0600
  • Donald Bruckman Fri, 2 Nov 2007 10:39:35 -0600
  • Neil Moore Fri, 2 Nov 2007 10:54:34 -0600
  • Tom . Hunt Fri, 2 Nov 2007 11:12:43 -0600
  • Bill Allen Fri, 2 Nov 2007 11:15:15 -0600
  • Donald Bruckman Fri, 2 Nov 2007 11:25:28 -0600
  • Shaun Dustin Fri, 2 Nov 2007 11:39:19 -0600
  • Steve Gordin Fri, 2 Nov 2007 11:47:57 -0600
  • Bill Allen Fri, 2 Nov 2007 11:56:19 -0600
  • Donald Bruckman Fri, 2 Nov 2007 14:01:31 -0600
  • Donald Bruckman Fri, 2 Nov 2007 14:30:55 -0600
  • Mark Deardorff Fri, 2 Nov 2007 14:40:52 -0600
  • Tom . Hunt Fri, 2 Nov 2007 14:45:00 -0600

• earthquake-resistant design
  • Bob Freeman Fri, 2 Nov 2007 11:07:49 -0600

• Elongation of ASTM A496
  • 남윤호 Mon, 3 Dec 2007 12:44:24 -0700
  • Tom . Hunt Mon, 3 Dec 2007 12:46:26 -0700
  • Trib K Mittra Tue, 4 Dec 2007 09:50:02 -0700

• Embarrassingly dumb question
  • WISH DENNIS Tue, 20 Nov 2007 18:51:32 -0700
  • Jnapd Tue, 20 Nov 2007 19:41:30 -0700
  • WISH DENNIS Tue, 20 Nov 2007 19:59:39 -0700
  • Bill Polhemus Tue, 20 Nov 2007 20:07:52 -0700

• EnerCalc 6
  • Yi Yang Mon, 3 Dec 2007 15:11:13 -0700
  • Wesley Werner Mon, 3 Dec 2007 15:24:14 -0700
  • Haan, Scott M POA Mon, 3 Dec 2007 15:37:25 -0700
  • Gerard Madden, SE Mon, 3 Dec 2007 15:49:58 -0700

• ENERCALC 6
  • Michael Brooks Mon, 3 Dec 2007 17:33:16 -0700
  • HBAP Mon, 3 Dec 2007 19:04:55 -0700
  • erik gibbs Mon, 3 Dec 2007 21:33:08 -0700
  • David Topete Tue, 4 Dec 2007 09:24:54 -0700
  • HBAP Tue, 4 Dec 2007 12:59:43 -0700

• Re: EnerCalc 6
  • ASLCSE Wed, 5 Dec 2007 19:36:26 -0700

• Re: ENERCALC 6
  • ASLCSE Wed, 5 Dec 2007 19:49:15 -0700

• RE: EnerCalc 6
  • Haan, Scott M POA Tue, 18 Dec 2007 16:38:17 -0700
  • Jim Wilson Tue, 18 Dec 2007 18:47:37 -0700
  • Chuck Utzman Tue, 18 Dec 2007 22:15:15 -0700
  • Wesley Werner Wed, 19 Dec 2007 06:13:15 -0700
  • bpce Wed, 19 Dec 2007 07:15:22 -0700

• Equivallent Frame Method for RC shear walls
  • m.labafzadeh Fri, 9 Nov 2007 23:49:39 -0700
  • Casey K. Hemmatyar Mon, 12 Nov 2007 09:39:27 -0700

• Expansion Joint in Tunnel
  • Samiappan Srinivasan Mon, 19 Nov 2007 23:54:15 -0700
  • Bill Polhemus Tue, 20 Nov 2007 06:45:21 -0700
  • Daryl Richardson Tue, 20 Nov 2007 10:13:33 -0700
  • Gil Brock Tue, 20 Nov 2007 16:46:47 -0700
  • Harold Sprague Wed, 21 Nov 2007 10:36:35 -0700

• Expansive Foundation
  • Gautam Manandhar Fri, 12 Oct 2007 16:14:49 -0600
  • Chuck Utzman Fri, 12 Oct 2007 16:35:07 -0600
  • Adjebli Fri, 12 Oct 2007 16:35:55 -0600
  • Chuck Utzman Fri, 12 Oct 2007 19:19:19 -0600
  • Adjebli Fri, 12 Oct 2007 20:06:47 -0600
  • rowyz Fri, 12 Oct 2007 20:40:48 -0600
  • Harold Sprague Sat, 13 Oct 2007 10:47:03 -0600
  • Gautam Manandhar Tue, 16 Oct 2007 13:12:23 -0600
  • rowyz Tue, 16 Oct 2007 15:00:34 -0600
  • Garner, Robert Tue, 16 Oct 2007 15:26:44 -0600
  • Gerard Madden, SE Tue, 16 Oct 2007 22:17:31 -0600
  • bill Wed, 17 Oct 2007 07:53:28 -0600
  • Jerry Coombs Wed, 17 Oct 2007 08:36:54 -0600

• F1554 and Fatigue
  • Jake Watson Mon, 10 Dec 2007 13:26:44 -0700

• FAILURE
  • ASC Mon, 5 Nov 2007 01:33:03 -0700

• Fiber Reinforced slab
  • Jason Christensen Thu, 8 Nov 2007 10:49:13 -0700
  • Christopher Banbury Thu, 8 Nov 2007 11:13:23 -0700

• Fiber reinforced slab
  • Bob Freeman Thu, 8 Nov 2007 11:34:23 -0700

• Re: Fiber Reinforced slab
  • Jordan Truesdell, PE Thu, 8 Nov 2007 11:39:39 -0700
  • Jerry Coombs Thu, 8 Nov 2007 13:09:58 -0700

• Fire Rated Assembly Consultants >> One Hour Floor / Ceiling Assembly UL - G525 & G531
  • Jim Chatterley PE Thu, 15 Nov 2007 12:12:06 -0700
  • Ben Yousefi Thu, 15 Nov 2007 12:20:11 -0700
  • Tom . Hunt Thu, 15 Nov 2007 13:21:48 -0700

• footings look too big
  • Haan, Scott M POA Fri, 2 Nov 2007 17:34:46 -0600
  • David Topete Fri, 2 Nov 2007 17:39:29 -0600
  • Haan, Scott M POA Fri, 2 Nov 2007 17:48:58 -0600
  • David Topete Fri, 2 Nov 2007 17:55:22 -0600
  • Donald Bruckman Fri, 2 Nov 2007 18:23:17 -0600
  • Jason Emoto Fri, 2 Nov 2007 18:30:52 -0600
  • Haan, Scott M POA Fri, 2 Nov 2007 18:37:20 -0600
  • Bill Allen Fri, 2 Nov 2007 18:47:30 -0600
  • Michel Fri, 2 Nov 2007 18:54:10 -0600
  • Donald Bruckman Fri, 2 Nov 2007 18:57:47 -0600
  • Neil Moore Fri, 2 Nov 2007 20:35:59 -0600
  • Marlou Rodriguez Fri, 2 Nov 2007 20:40:16 -0600
  • Larry Hauer Sat, 3 Nov 2007 08:57:37 -0600
  • Paul Ransom Sat, 3 Nov 2007 09:11:39 -0600
  • ECVAl3 Sat, 3 Nov 2007 12:31:39 -0600
  • Bill Allen Sat, 3 Nov 2007 12:36:51 -0600
  • Gerard Madden, SE Sat, 3 Nov 2007 13:19:59 -0600
  • Drew Morris Sat, 3 Nov 2007 15:02:46 -0600
  • hadiprawira djohan Sat, 3 Nov 2007 17:14:15 -0600
  • Bill Polhemus Sun, 4 Nov 2007 05:35:09 -0700
  • Christopher Wright Sun, 4 Nov 2007 09:14:40 -0700
  • Jnapd Sun, 4 Nov 2007 10:12:27 -0700
  • Donald Bruckman Sun, 4 Nov 2007 16:24:50 -0700
  • Larry Hauer Mon, 5 Nov 2007 15:23:13 -0700
  • Scott Maxwell Mon, 5 Nov 2007 15:24:20 -0700
  • G Vishwanath Mon, 5 Nov 2007 23:58:50 -0700

• Foundation for large tanks
  • Padmanabhan Rajendran Mon, 22 Oct 2007 15:40:26 -0600
  • Richard L. Hess Mon, 22 Oct 2007 19:15:22 -0600
  • Rob Randig Tue, 23 Oct 2007 13:08:43 -0600

• Foundations for a 3-pinned arch stadium
  • Kevin Below Sun, 7 Oct 2007 20:27:51 -0600
  • Jordan Truesdell, PE Mon, 8 Oct 2007 06:42:40 -0600
  • Paul Ransom Mon, 8 Oct 2007 09:36:17 -0600
  • Kevin Below Mon, 8 Oct 2007 21:25:03 -0600
  • Harold Sprague Mon, 8 Oct 2007 22:07:27 -0600
  • Gary L. Hodgson and Assoc. Tue, 9 Oct 2007 05:43:00 -0600
  • Gary Loomis Tue, 9 Oct 2007 06:13:59 -0600
  • Paul Ransom Tue, 9 Oct 2007 07:28:03 -0600
  • David Topete Tue, 9 Oct 2007 10:27:11 -0600
  • Kevin Below Tue, 9 Oct 2007 18:41:14 -0600
  • Kevin Below Tue, 9 Oct 2007 18:42:00 -0600
  • Kevin Below Tue, 9 Oct 2007 18:54:14 -0600
  • Jerry Coombs Wed, 10 Oct 2007 06:40:41 -0600
  • Paul Ransom Thu, 11 Oct 2007 00:46:30 -0600
  • Paul Ransom Thu, 11 Oct 2007 19:01:30 -0600
  • Kevin Below Thu, 11 Oct 2007 19:35:53 -0600

• Free 2007 CBC code seminars including the LA regional amendments
  • Ben Yousefi Fri, 9 Nov 2007 15:15:26 -0700
  • raymond shreenan Fri, 9 Nov 2007 15:44:13 -0700
  • Tom . Hunt Mon, 12 Nov 2007 08:27:53 -0700
  • Ben Yousefi Mon, 12 Nov 2007 09:28:08 -0700
  • Tom . Hunt Mon, 12 Nov 2007 10:45:16 -0700
  • Steve Gordin Tue, 13 Nov 2007 11:17:26 -0700
  • Trib K Mittra Tue, 4 Dec 2007 10:09:48 -0700

• Freezer Building Roof Snow Load
  • Steve Mallett Wed, 28 Nov 2007 07:41:36 -0700
  • Stuart, Matthew Wed, 28 Nov 2007 08:02:28 -0700
  • Gary L. Hodgson and Assoc. Thu, 29 Nov 2007 05:27:57 -0700

• Frost footings - whats the big deal?
  • Jim Wilson Mon, 5 Nov 2007 08:39:18 -0700
  • Micayas, Julius Mon, 5 Nov 2007 09:38:28 -0700
  • David Fisher Mon, 5 Nov 2007 10:03:00 -0700
  • Daryl Richardson Mon, 5 Nov 2007 17:35:45 -0700
  • Harold Sprague Mon, 5 Nov 2007 21:13:04 -0700
  • Jim Wilson Tue, 6 Nov 2007 18:52:50 -0700
  • Richard L. Hess Tue, 6 Nov 2007 19:25:57 -0700
  • Jordan Truesdell, PE Tue, 6 Nov 2007 19:27:34 -0700
  • Daryl Richardson Wed, 7 Nov 2007 18:07:22 -0700

• Frost Line
  • Micayas, Julius Wed, 24 Oct 2007 10:46:43 -0600
  • Ralph Kratz Wed, 24 Oct 2007 11:00:43 -0600
  • Alexander Bausk Wed, 24 Oct 2007 11:06:25 -0600
  • Micayas, Julius Wed, 24 Oct 2007 11:07:44 -0600
  • Garner, Robert Wed, 24 Oct 2007 11:15:24 -0600
  • Alexander Bausk Wed, 24 Oct 2007 11:25:51 -0600
  • Alexander Bausk Wed, 24 Oct 2007 11:33:40 -0600
  • Harold Sprague Wed, 24 Oct 2007 12:43:39 -0600
  • Daryl Richardson Wed, 24 Oct 2007 17:31:59 -0600
  • Ehrlich, Gary Thu, 25 Oct 2007 11:13:20 -0600

• Fundamental period of tanks
  • Dave Adams Thu, 27 Dec 2007 13:05:33 -0700
  • Tom . Hunt Thu, 27 Dec 2007 13:44:43 -0700
  • Harold Sprague Thu, 27 Dec 2007 14:36:59 -0700
  • Dave Adams Thu, 27 Dec 2007 16:34:37 -0700
  • Dave Adams Fri, 28 Dec 2007 10:12:40 -0700
  • Kipp Martin Fri, 28 Dec 2007 10:49:54 -0700
  • Tom . Hunt Fri, 28 Dec 2007 12:20:49 -0700

• Good reference or explanatory notes/example on Seismic Load Calculation based on ASCE 7-05 for building as well as non building structures
  • Sanjay Verma Wed, 3 Oct 2007 15:26:51 -0600
  • Tom . Hunt Wed, 3 Oct 2007 15:39:23 -0600
  • Mark Deardorff Wed, 3 Oct 2007 15:40:33 -0600

• Great ASCE7 spreadsheet
  • Mark Johnson Mon, 3 Dec 2007 11:45:27 -0700
  • Wesley Werner Mon, 3 Dec 2007 13:25:36 -0700
  • Tom . Hunt Mon, 3 Dec 2007 14:09:11 -0700
  • Mark Johnson Tue, 4 Dec 2007 08:41:11 -0700
  • Conrad Harrison Tue, 4 Dec 2007 19:59:59 -0700
  • Bill Allen Tue, 4 Dec 2007 20:32:23 -0700
  • Dmitri Wright Wed, 5 Dec 2007 07:41:04 -0700
  • Bill Allen Wed, 5 Dec 2007 08:05:16 -0700

• RE: Great ASCE7 spreadsheet / ComboBoxes
  • Conrad Harrison Thu, 6 Dec 2007 21:13:40 -0700
  • Bill Allen Fri, 7 Dec 2007 08:50:33 -0700
  • Doug Mayer Fri, 7 Dec 2007 10:37:12 -0700
  • Bill Allen Fri, 7 Dec 2007 10:42:46 -0700
  • Padmanabhan Rajendran Sat, 8 Dec 2007 08:32:19 -0700
  • Conrad Harrison Sun, 9 Dec 2007 17:48:57 -0700
  • Bill Allen Tue, 11 Dec 2007 09:13:16 -0700
  • Padmanabhan Rajendran Tue, 11 Dec 2007 12:17:59 -0700

• gypsum suspended ceiling detail
  • Haan, Scott M POA Tue, 13 Nov 2007 16:01:37 -0700
  • Jeff Smith Tue, 13 Nov 2007 16:15:29 -0700
  • Donald Bruckman Tue, 13 Nov 2007 16:26:26 -0700
  • Jeff Smith Tue, 13 Nov 2007 16:37:50 -0700

• RE: Hand Lettering Font for Windows programs and for CAD programs that use True-Type fonts.
  • Garner, Robert Mon, 22 Oct 2007 08:26:24 -0600

• Hand Lettering Font for Windows programs and for CAD programs that use True-Type fonts.
  • Dennis Wish Sat, 20 Oct 2007 18:17:32 -0600
  • Larry Hauer Mon, 22 Oct 2007 08:06:09 -0600
  • Alexander Bausk Mon, 22 Oct 2007 08:39:33 -0600
  • Christopher Banbury Mon, 22 Oct 2007 09:10:04 -0600
  • Alexander Bausk Mon, 22 Oct 2007 09:26:45 -0600

• Happy New Year
  • Gary L. Hodgson and Assoc. Mon, 31 Dec 2007 06:13:06 -0700
  • Jnapd Mon, 31 Dec 2007 10:02:10 -0700

• Hay and Straw, was Re: sustainable companies
  • Jim Getaz Mon, 19 Nov 2007 06:51:26 -0700
  • Gary Loomis Mon, 19 Nov 2007 07:11:01 -0700
  • Conrad Harrison Mon, 19 Nov 2007 17:58:59 -0700
  • Jeff Smith Mon, 19 Nov 2007 19:28:16 -0700

• HIGH SEISMIC LOADS
  • ASC Mon, 31 Dec 2007 15:24:32 -0700
  • Christopher Wright Mon, 31 Dec 2007 22:32:28 -0700

• Hilti powder-actu fasteners
  • David Topete Fri, 9 Nov 2007 11:07:26 -0700
  • Michel Blangy Fri, 9 Nov 2007 11:38:24 -0700
  • David Topete Fri, 9 Nov 2007 11:42:30 -0700
  • Donald Bruckman Sat, 10 Nov 2007 10:25:23 -0700
  • James Getaz Sun, 11 Nov 2007 10:55:23 -0700
  • Jordan Truesdell, PE Sun, 11 Nov 2007 11:27:53 -0700

• Holiday wishes
  • Cummings, Thomas J. Fri, 14 Dec 2007 11:33:06 -0700

• horizontal roof bracing 2
  • Andrew Kester, PE Tue, 18 Dec 2007 11:28:20 -0700

• Hot Rolled Vs Cold formed steel properties
  • Lakshmana Nukala Fri, 26 Oct 2007 23:34:29 -0600
  • alfred mueller Sat, 27 Oct 2007 03:00:49 -0600

• HSS welds
  • Mark Johnson Sat, 22 Dec 2007 10:42:19 -0700
  • Gerard Madden, SE Sat, 22 Dec 2007 12:27:46 -0700

• re: HSS welds & HSS in general
  • Andrew Kester, P.E. Fri, 30 Nov 2007 13:36:24 -0700
  • Joseph R. Grill Fri, 30 Nov 2007 21:07:20 -0700
  • Paul Ransom Sat, 1 Dec 2007 08:42:54 -0700

• RE: I am unavailable to respond to your email. If you need immediate assistance or would like
  • Garner, Robert Tue, 23 Oct 2007 15:39:25 -0600

• I am unavailable to respond to your email. If you need immediate assistance or would like
  • Sheila Wray Tue, 23 Oct 2007 14:42:22 -0600
  • Sheila Wray Tue, 23 Oct 2007 14:54:36 -0600
  • Bill Allen Tue, 23 Oct 2007 15:12:00 -0600
  • Sheila Wray Tue, 23 Oct 2007 15:18:52 -0600
  • David Fisher Tue, 23 Oct 2007 15:51:59 -0600
  • Sheila Wray Tue, 23 Oct 2007 15:53:20 -0600
  • Sheila Wray Tue, 23 Oct 2007 15:53:47 -0600
  • Sheila Wray Tue, 23 Oct 2007 19:47:12 -0600
  • Jimenez, Jorge A. Wed, 24 Oct 2007 06:26:55 -0600

• RE: I may have made a huge mistake...
  • David Fisher Tue, 27 Nov 2007 13:16:30 -0700
  • Garner, Robert Tue, 27 Nov 2007 14:31:22 -0700
  • Bill Allen Tue, 27 Nov 2007 15:19:52 -0700
  • Jnapd Tue, 27 Nov 2007 16:25:08 -0700
  • Joseph Harouni Tue, 27 Nov 2007 16:59:11 -0700
  • Bill Allen Tue, 27 Nov 2007 17:05:11 -0700
  • Donald Bruckman Wed, 28 Nov 2007 09:45:19 -0700

• IBC Code Enforcement
  • raincat1 Mon, 17 Dec 2007 10:37:40 -0700
  • Chuck Utzman Mon, 17 Dec 2007 10:44:39 -0700
  • Mark Pemberton Mon, 17 Dec 2007 11:10:44 -0700
  • Rhkratzse Mon, 17 Dec 2007 11:33:50 -0700
  • Mark Pemberton Mon, 17 Dec 2007 12:37:05 -0700
  • Gerard Madden, SE Mon, 17 Dec 2007 13:17:45 -0700
  • Mark Pemberton Mon, 17 Dec 2007 14:49:48 -0700

• IBC Conventional Light Framed Construction
  • Andy Heigley Wed, 17 Oct 2007 08:45:01 -0600
  • Tom Skaggs Wed, 17 Oct 2007 08:53:52 -0600
  • Ehrlich, Gary Wed, 17 Oct 2007 09:16:26 -0600
  • Andy Heigley Wed, 17 Oct 2007 11:29:00 -0600
  • Guadalupe Rivera Wed, 17 Oct 2007 11:34:43 -0600
  • Tom Skaggs Wed, 17 Oct 2007 11:47:16 -0600
  • Ehrlich, Gary Wed, 17 Oct 2007 11:53:07 -0600

• IBC06 / CBC07 Stone veneer on metal studs
  • Yi Yang Mon, 22 Oct 2007 18:41:23 -0600
  • Ehrlich, Gary Fri, 26 Oct 2007 09:08:04 -0600
  • Yi Yang Mon, 29 Oct 2007 10:10:34 -0600
  • Casey K. Hemmatyar Mon, 29 Oct 2007 11:17:31 -0600

• Indiana Engineer
  • Brian K. Smith Wed, 24 Oct 2007 09:28:50 -0600
  • David Fisher Wed, 24 Oct 2007 09:31:48 -0600
  • Brian K. Smith Wed, 24 Oct 2007 09:39:21 -0600

• RE: Inexperienced engineers (was Structural Engineering Spreadsheets)
  • Casey K. Hemmatyar Tue, 6 Nov 2007 10:16:53 -0700

• Interior Door Forces
  • ENGRLAINES Sun, 7 Oct 2007 00:41:27 -0600
  • Alex C. Nacionales Sun, 7 Oct 2007 22:48:55 -0600
  • Jerry Coombs Mon, 8 Oct 2007 06:41:46 -0600
  • Alex C. Nacionales Mon, 8 Oct 2007 08:03:59 -0600

• INTERMITTENT VS CONTINUOUS WELDS
  • ASC Tue, 9 Oct 2007 02:29:41 -0600

• Invitation to Dr. Charles H. Thornton's Seminar on UC Campus-Oct 8-2007, 1:00-2:00 Sibley Aud.
  • Abolhassan Astaneh-Asl Fri, 5 Oct 2007 08:28:38 -0600

• Is ASCE desperate for cash flow?
  • Dennis Wish Wed, 31 Oct 2007 15:15:03 -0600
  • Gerard Madden, SE Wed, 31 Oct 2007 15:22:32 -0600
  • Jnapd Wed, 31 Oct 2007 15:30:25 -0600
  • Jason Christensen Wed, 31 Oct 2007 15:32:08 -0600
  • Shaun Dustin Wed, 31 Oct 2007 15:44:11 -0600
  • Mark Deardorff Wed, 31 Oct 2007 15:49:25 -0600
  • Drew Morris Wed, 31 Oct 2007 15:52:59 -0600
  • Christopher Wright Wed, 31 Oct 2007 16:12:29 -0600
  • Gerard Madden, SE Wed, 31 Oct 2007 16:17:52 -0600
  • David Fisher Wed, 31 Oct 2007 16:20:25 -0600
  • Christopher Wright Wed, 31 Oct 2007 16:28:25 -0600
  • Bill Polhemus Wed, 31 Oct 2007 21:47:08 -0600
  • Bill Polhemus Wed, 31 Oct 2007 21:49:40 -0600
  • Bill Polhemus Wed, 31 Oct 2007 21:52:13 -0600
  • David Topete Thu, 1 Nov 2007 09:01:22 -0600
  • sscholl2(--nospam--at)juno.com Wed, 7 Nov 2007 21:13:57 -0700

• Re: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appe...
  • Jnapd Wed, 12 Dec 2007 13:44:22 -0700
  • Freeman C. Tang Wed, 12 Dec 2007 14:35:09 -0700

• Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D)?
  • Freeman C. Tang Wed, 12 Dec 2007 12:43:33 -0700
  • Gerard Madden, SE Wed, 12 Dec 2007 13:04:48 -0700
  • Gaines, David Wed, 12 Dec 2007 13:14:54 -0700
  • Freeman Tang Wed, 12 Dec 2007 13:28:02 -0700
  • Freeman Tang Wed, 12 Dec 2007 13:52:17 -0700
  • Bill Allen Wed, 12 Dec 2007 16:27:32 -0700
  • Freeman Tang Wed, 12 Dec 2007 17:20:54 -0700

• jailbreak through CMU
  • Christopher Banbury Tue, 18 Dec 2007 09:01:36 -0700
  • Garner, Robert Tue, 18 Dec 2007 09:29:38 -0700
  • Jerry Coombs Tue, 18 Dec 2007 09:35:42 -0700
  • Paul Feather Tue, 18 Dec 2007 10:33:25 -0700
  • Gerard Madden, SE Tue, 18 Dec 2007 11:05:14 -0700
  • Haan, Scott M POA Tue, 18 Dec 2007 11:12:26 -0700
  • Christopher Banbury Tue, 18 Dec 2007 11:43:16 -0700
  • Jordan Truesdell, PE Tue, 18 Dec 2007 14:01:11 -0700
  • Josh Plummer Tue, 18 Dec 2007 18:46:41 -0700
  • Daryl Richardson Tue, 18 Dec 2007 19:22:18 -0700
  • Conrad Harrison Tue, 18 Dec 2007 19:34:54 -0700

• Jeff Giger/DAN/Minerals/METSO is out of the office.
  • jeff . giger Sat, 22 Dec 2007 01:13:45 -0700

• Job at The University of Sydney
  • Sandra Klinke Wed, 24 Oct 2007 19:05:12 -0600

• Job in the UAE
  • John Nader Thu, 1 Nov 2007 06:48:43 -0600
  • Micayas, Julius Thu, 1 Nov 2007 07:15:39 -0600
  • Christopher Wright Thu, 1 Nov 2007 09:56:45 -0600

• Kama Modular Systems
  • Thor Tandy Wed, 24 Oct 2007 11:17:40 -0600

• LGS Framing Details
  • Gerard Madden, SE Wed, 31 Oct 2007 12:14:00 -0600

• lifting preassemble structures
  • Rand W Holtham Thu, 8 Nov 2007 06:15:01 -0700
  • Tom . Hunt Thu, 8 Nov 2007 08:18:48 -0700
  • Jordan Truesdell, PE Thu, 8 Nov 2007 08:42:31 -0700
  • Christopher Wright Thu, 8 Nov 2007 09:39:23 -0700

• Light Framing Wood - Room Addition Lateral question
  • Dennis Wish Thu, 11 Oct 2007 22:29:52 -0600
  • ECVAl3 Sat, 13 Oct 2007 09:33:42 -0600
  • Dennis Wish Sat, 13 Oct 2007 18:35:10 -0600

• Live and Dead Load Spreadsheet
  • WISH DENNIS Fri, 7 Dec 2007 22:50:58 -0700
  • Bill Lehmer Sat, 8 Dec 2007 07:32:41 -0700
  • John Gobster Mon, 10 Dec 2007 10:49:43 -0700

• Live Load for residential home gym
  • David Topete Wed, 10 Oct 2007 17:05:18 -0600
  • Doug Mayer Wed, 10 Oct 2007 17:40:00 -0600
  • Jordan Truesdell, PE Wed, 10 Oct 2007 19:13:45 -0600
  • Micayas, Julius Thu, 11 Oct 2007 07:04:15 -0600
  • Jerry Coombs Thu, 11 Oct 2007 07:14:51 -0600
  • Jerry Coombs Thu, 11 Oct 2007 07:36:20 -0600
  • Jerry Coombs Thu, 11 Oct 2007 07:43:29 -0600
  • Micayas, Julius Thu, 11 Oct 2007 07:48:06 -0600
  • Mike Jones Thu, 11 Oct 2007 08:02:27 -0600
  • Michel Blangy Thu, 11 Oct 2007 09:43:06 -0600
  • Gerard Madden, SE Thu, 11 Oct 2007 10:27:54 -0600
  • David Topete Thu, 11 Oct 2007 10:35:36 -0600
  • Christopher Banbury Thu, 11 Oct 2007 11:21:24 -0600
  • Gerard Madden, SE Thu, 11 Oct 2007 12:30:05 -0600

• Los Angeles City 2007 building codes.
  • ndz28 Wed, 7 Nov 2007 12:23:06 -0700
  • David Topete Wed, 7 Nov 2007 12:34:56 -0700

• RE: Mathcad
  • Gautam Manandhar Thu, 1 Nov 2007 13:36:08 -0600
  • Alex C. Nacionales Thu, 1 Nov 2007 20:42:29 -0600
  • Acharya, Suresh Fri, 2 Nov 2007 09:43:09 -0600
  • William.Sherman Fri, 2 Nov 2007 09:49:18 -0600
  • Acharya, Suresh Fri, 2 Nov 2007 12:13:10 -0600
  • William.Sherman Fri, 2 Nov 2007 13:04:53 -0600

• RE: Mathcad - Converting Excel to Mathcad: Best Practices
  • Acharya, Suresh Fri, 2 Nov 2007 17:17:41 -0600

• Mathcad vs. Matlab
  • Haan, Scott M POA Thu, 1 Nov 2007 12:25:00 -0600
  • Mark Deardorff Thu, 1 Nov 2007 12:49:41 -0600
  • Micayas, Julius Thu, 1 Nov 2007 12:59:33 -0600
  • Alexander Bausk Thu, 1 Nov 2007 13:16:16 -0600
  • Scott Maxwell Thu, 1 Nov 2007 13:31:09 -0600
  • Kevin Below Thu, 1 Nov 2007 18:49:36 -0600

• Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC?
  • Jerry Coombs Thu, 8 Nov 2007 05:52:21 -0700

• RE: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PT C?
  • Acharya, Suresh Thu, 8 Nov 2007 18:41:14 -0700

• RE: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PT C?
  • Acharya, Suresh Thu, 8 Nov 2007 18:28:22 -0700

• Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PT C?
  • Bill Polhemus Thu, 8 Nov 2007 18:33:57 -0700

• MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC?
  • Bill Polhemus Sun, 4 Nov 2007 20:17:30 -0700
  • Bill Polhemus Wed, 7 Nov 2007 20:03:47 -0700
  • Christopher Wright Wed, 7 Nov 2007 20:32:10 -0700
  • Rhkratzse Wed, 7 Nov 2007 21:35:02 -0700
  • Christopher Wright Wed, 7 Nov 2007 22:43:32 -0700
  • Bill Polhemus Thu, 8 Nov 2007 18:00:33 -0700
  • Jordan Truesdell, PE Thu, 8 Nov 2007 18:29:12 -0700
  • Paul Ransom Thu, 8 Nov 2007 18:53:00 -0700
  • Donald Bruckman Fri, 9 Nov 2007 09:23:33 -0700
  • Scott Maxwell Sun, 11 Nov 2007 21:42:28 -0700
  • Christopher Wright Sun, 11 Nov 2007 22:03:07 -0700
  • Scott Maxwell Mon, 12 Nov 2007 04:27:59 -0700

• Merry Christmas
  • raymond shreenan Mon, 24 Dec 2007 17:29:11 -0700

• Metal Beam Guard Railing Section -Queation
  • Lakhani, Sid Sun, 4 Nov 2007 12:02:18 -0700
  • Bill Polhemus Sun, 4 Nov 2007 20:15:35 -0700

• metal siding
  • Bob Freeman Wed, 3 Oct 2007 19:05:51 -0600

• metal siding screwed to steel
  • Drew Morris Wed, 3 Oct 2007 18:36:34 -0600
  • Marlou Rodriguez Wed, 3 Oct 2007 21:13:18 -0600
  • Scott, William N Wed, 3 Oct 2007 21:16:17 -0600

• MFR home foundations
  • Andrew Kester, P.E. Wed, 10 Oct 2007 16:25:37 -0600
  • David Fisher Wed, 10 Oct 2007 16:38:25 -0600
  • Joseph R. Grill Wed, 10 Oct 2007 17:33:15 -0600

• Mfr home foundations
  • Bob Freeman Wed, 10 Oct 2007 17:46:30 -0600

• RE: MFR home foundations
  • Haan, Scott M POA Wed, 10 Oct 2007 17:59:08 -0600
  • Jordan Truesdell, PE Wed, 10 Oct 2007 19:10:47 -0600
  • Gary Loomis Wed, 10 Oct 2007 21:17:18 -0600
  • M. David Finley, P.E., P.A. Thu, 11 Oct 2007 06:36:28 -0600
  • Jerry Coombs Thu, 11 Oct 2007 06:59:42 -0600
  • Jeff Hedman Thu, 11 Oct 2007 10:25:39 -0600
  • Gary L. Hodgson and Assoc. Fri, 12 Oct 2007 05:40:30 -0600
  • Jeff Hedman Fri, 12 Oct 2007 10:48:12 -0600
  • Harold Sprague Fri, 12 Oct 2007 11:19:41 -0600
  • Gary L. Hodgson and Assoc. Sat, 13 Oct 2007 06:35:42 -0600
  • Jim Wilson Tue, 16 Oct 2007 19:49:06 -0600

• Modeling and results
  • refugio rochin Fri, 2 Nov 2007 14:04:47 -0600

• MODELING: Accounting for a 'Black Box' Supported Structure
  • Bill Polhemus Fri, 23 Nov 2007 12:40:03 -0700
  • Shaun Dustin Sat, 24 Nov 2007 22:27:48 -0700

• New and hopefully useful web site
  • Chris Slater Wed, 12 Dec 2007 12:09:18 -0700
  • Garner, Robert Wed, 12 Dec 2007 12:22:05 -0700
  • Mark Johnson Thu, 13 Dec 2007 09:40:14 -0700
  • Joseph R. Grill Thu, 13 Dec 2007 09:48:10 -0700
  • Chris Slater Thu, 13 Dec 2007 10:20:22 -0700
  • Casey K. Hemmatyar Thu, 13 Dec 2007 11:48:44 -0700
  • Micayas, Julius Thu, 13 Dec 2007 12:50:54 -0700
  • Richard L. Hess Thu, 13 Dec 2007 15:33:37 -0700
  • Bill Allen Thu, 13 Dec 2007 16:06:01 -0700
  • Jerry Coombs Fri, 14 Dec 2007 06:45:49 -0700
  • Chris Slater Fri, 14 Dec 2007 07:38:11 -0700
  • Gaines, David Fri, 14 Dec 2007 11:24:18 -0700
  • Bill Allen Fri, 14 Dec 2007 12:19:00 -0700

• RE: New and hopefully useful website
  • Jerry Coombs Fri, 14 Dec 2007 07:01:32 -0700
  • Mark Johnson Fri, 14 Dec 2007 09:35:48 -0700

• New IBC conversion and Structural notes
  • erik gibbs Mon, 19 Nov 2007 13:24:13 -0700

• New IBC Structural Notes
  • erik gibbs Fri, 16 Nov 2007 14:09:34 -0700

• October Structural Engineer " Resisting Lateral Forces Cumulative overturning design"
  • Haan, Scott M POA Tue, 6 Nov 2007 13:42:07 -0700
  • Jeff Smith Tue, 6 Nov 2007 14:20:53 -0700
  • Jeff Smith Tue, 6 Nov 2007 14:27:54 -0700
  • Mark Deardorff Tue, 6 Nov 2007 14:29:22 -0700
  • Marlou Rodriguez Tue, 6 Nov 2007 15:40:11 -0700
  • Robert Kazanjy Tue, 6 Nov 2007 23:40:33 -0700
  • Jordan Truesdell, PE Wed, 7 Nov 2007 08:17:13 -0700

• Off Topic: Wimax in Bangalore
  • G Vishwanath Sat, 29 Dec 2007 01:25:02 -0700
  • Bill Polhemus Sun, 30 Dec 2007 07:32:24 -0700

• Offer to the SEAINT List
  • Bill Allen Sun, 25 Nov 2007 10:13:10 -0700

• Online archive of old Uniform Building Codes?
  • Gould, Diane Thu, 15 Nov 2007 11:42:50 -0700
  • Harold Sprague Thu, 15 Nov 2007 12:45:22 -0700

• OOP Wall Anchorage - min. size of wood framing member
  • sutej Mon, 26 Nov 2007 13:46:12 -0700
  • WISH DENNIS Mon, 26 Nov 2007 15:18:22 -0700
  • Gerard Madden, SE Mon, 26 Nov 2007 21:04:15 -0700

• Openings in concrete beams
  • Gaines, David Fri, 7 Dec 2007 12:57:52 -0700
  • Stuart, Matthew Fri, 7 Dec 2007 13:09:41 -0700
  • Casey K. Hemmatyar Fri, 7 Dec 2007 13:24:02 -0700
  • Gil Brock Fri, 7 Dec 2007 23:00:20 -0700
  • Scott, William N Sat, 8 Dec 2007 15:58:16 -0700
  • JC Wish L Wed, 12 Dec 2007 07:51:33 -0700

• RE:OT- Scanners
  • Gautam Manandhar Fri, 2 Nov 2007 13:11:25 -0600
  • Rhkratzse Fri, 2 Nov 2007 13:30:10 -0600
  • Christopher Banbury Fri, 2 Nov 2007 13:33:58 -0600
  • Paul Ransom Sat, 3 Nov 2007 09:01:31 -0600

• paid for release of CAD files to subs...
  • David Fisher Mon, 22 Oct 2007 12:29:51 -0600
  • Adam Vakiener Tue, 23 Oct 2007 05:35:20 -0600
  • Gary L. Hodgson and Assoc. Tue, 23 Oct 2007 05:46:36 -0600
  • Jerry Coombs Tue, 23 Oct 2007 06:27:04 -0600
  • Bill Allen Tue, 23 Oct 2007 07:48:48 -0600
  • Jerry Coombs Tue, 23 Oct 2007 07:59:00 -0600
  • Bill Allen Tue, 23 Oct 2007 09:21:05 -0600

• PEMB Foundation - Foundation Resistance to Uplift
  • mail Wed, 31 Oct 2007 06:04:06 -0600

• PEMB foundation uplift
  • Truitt Vance Wed, 21 Nov 2007 18:26:56 -0700
  • Jordan Truesdell, PE Wed, 21 Nov 2007 18:38:38 -0700
  • Jim Persing Wed, 21 Nov 2007 21:43:27 -0700
  • Gary L. Hodgson and Assoc. Thu, 22 Nov 2007 05:58:44 -0700

• Perforated shear walls
  • Jeff Smith Thu, 6 Dec 2007 17:10:57 -0700
  • Doug Mayer Thu, 6 Dec 2007 17:23:46 -0700
  • Bill Allen Thu, 6 Dec 2007 17:36:52 -0700
  • Jason Christensen Thu, 6 Dec 2007 17:43:25 -0700
  • Jnapd Thu, 6 Dec 2007 17:56:06 -0700
  • Doug Mayer Thu, 6 Dec 2007 17:56:42 -0700
  • Jeff Smith Thu, 6 Dec 2007 17:58:00 -0700
  • Jeff Smith Thu, 6 Dec 2007 18:08:26 -0700
  • Truitt Vance Thu, 6 Dec 2007 18:10:52 -0700
  • Bill Allen Thu, 6 Dec 2007 18:10:54 -0700
  • Doug Mayer Thu, 6 Dec 2007 18:19:51 -0700
  • Chuck Utzman Thu, 6 Dec 2007 19:04:31 -0700
  • Gerard Madden, SE Thu, 6 Dec 2007 23:25:57 -0700
  • Jeff Hedman Fri, 7 Dec 2007 08:48:08 -0700
  • Jason Christensen Fri, 7 Dec 2007 09:08:17 -0700
  • Jeff Hedman Fri, 7 Dec 2007 10:28:45 -0700
  • Jason Christensen Fri, 7 Dec 2007 10:38:40 -0700
  • Jason Christensen Fri, 7 Dec 2007 10:58:06 -0700
  • Jason Christensen Fri, 7 Dec 2007 11:17:07 -0700
  • Chuck Utzman Fri, 7 Dec 2007 11:19:44 -0700
  • Jeff Hedman Fri, 7 Dec 2007 11:43:48 -0700
  • Jeff Hedman Fri, 7 Dec 2007 12:19:55 -0700
  • Jason Christensen Fri, 7 Dec 2007 13:32:28 -0700
  • Jason Christensen Fri, 7 Dec 2007 13:37:08 -0700
  • Chuck Utzman Fri, 7 Dec 2007 16:36:26 -0700

• Post-tensioned or reinforced ?
  • Kevin Below Fri, 16 Nov 2007 19:53:00 -0700
  • Daniel Popp Fri, 16 Nov 2007 22:29:27 -0700

• Pre-Engr. Mtl Bldg. W/ Tilt-up Wall
  • seaint04 Mon, 1 Oct 2007 10:45:25 -0600
  • Brian K. Smith Mon, 1 Oct 2007 11:12:40 -0600
  • Mark Remmetter Mon, 1 Oct 2007 13:05:06 -0600
  • Tom . Hunt Mon, 1 Oct 2007 13:52:52 -0600
  • A. J. Young Wed, 24 Oct 2007 22:27:02 -0600
  • Tom . Hunt Thu, 25 Oct 2007 07:53:42 -0600

• Precast manhole design
  • Sanjay Verma Fri, 2 Nov 2007 10:05:39 -0600
  • Mark Deardorff Fri, 2 Nov 2007 14:43:37 -0600
  • Rhkratzse Fri, 2 Nov 2007 14:54:45 -0600

• Prestressing strands 1958...
  • David Fisher Fri, 30 Nov 2007 14:16:37 -0700
  • Bill Polhemus Sun, 2 Dec 2007 22:26:08 -0700

• printers/ wood software
  • Andrew Kester, P.E. Wed, 31 Oct 2007 10:49:26 -0600
  • Paul Ransom Sat, 3 Nov 2007 09:19:19 -0600

• Procedures
  • Gary Loomis Thu, 27 Dec 2007 14:36:02 -0700
  • Donald Bruckman Thu, 27 Dec 2007 17:02:29 -0700
  • Mark Gilligan Thu, 27 Dec 2007 17:55:59 -0700
  • Bill Allen Thu, 27 Dec 2007 17:56:33 -0700
  • Jordan Truesdell, PE Fri, 28 Dec 2007 05:06:13 -0700
  • Jim Getaz Fri, 28 Dec 2007 06:28:17 -0700
  • Daryl Richardson Fri, 28 Dec 2007 11:39:38 -0700
  • Gerard Madden, SE Fri, 28 Dec 2007 14:48:21 -0700
  • Gary Loomis Fri, 28 Dec 2007 15:35:35 -0700

• RE: Profis Software
  • Christopher Banbury Wed, 12 Dec 2007 08:40:23 -0700
  • Bill Allen Wed, 12 Dec 2007 09:35:08 -0700
  • Jeff Smith Wed, 12 Dec 2007 13:46:31 -0700

• Profis Software was RE: Great ASCE7 spreadsheet / ComboBoxes
  • Jeff Smith Tue, 11 Dec 2007 13:29:27 -0700
  • Padmanabhan Rajendran Wed, 12 Dec 2007 10:51:23 -0700

• FW: Purdue University Co-Op Days Gift Donations
  • David Fisher Tue, 18 Dec 2007 09:28:04 -0700

• question my authority???!
  • Andrew Kester, PE Sat, 3 Nov 2007 11:44:55 -0600
  • Donald Bruckman Sun, 4 Nov 2007 16:58:27 -0700
  • Gary L. Hodgson and Assoc. Mon, 5 Nov 2007 05:44:43 -0700
  • Gary Loomis Mon, 5 Nov 2007 07:05:57 -0700
  • David Fisher Mon, 5 Nov 2007 09:36:34 -0700
  • Drew Morris Mon, 5 Nov 2007 13:38:06 -0700
  • David Topete Mon, 5 Nov 2007 14:23:53 -0700
  • Bill Polhemus Mon, 5 Nov 2007 19:30:26 -0700
  • Gerard Madden, SE Mon, 5 Nov 2007 21:52:25 -0700
  • Gary L. Hodgson and Assoc. Tue, 6 Nov 2007 05:36:13 -0700

• Re: question my authority???! (AKA Who is Eric Cartman?)
  • Rhkratzse Mon, 5 Nov 2007 20:26:26 -0700

• Re: question my authority???! (AKA Who is Eric Cartman?)
  • Robert Kazanjy Mon, 5 Nov 2007 20:37:30 -0700
  • Rhkratzse Mon, 5 Nov 2007 21:12:20 -0700
  • Jerry Coombs Tue, 6 Nov 2007 07:04:39 -0700
  • Robert Kazanjy Tue, 6 Nov 2007 23:41:24 -0700

• Re: question my authority???! Getting way OT
  • Jim Getaz Tue, 6 Nov 2007 06:32:27 -0700
  • Bill Polhemus Tue, 6 Nov 2007 12:31:24 -0700

• QUESTION REGARDING GLB REINFORCING?
  • Mike Hokama Thu, 15 Nov 2007 10:01:29 -0700
  • Tarek Mokhtar Thu, 15 Nov 2007 14:34:23 -0700
  • Bill Allen Thu, 15 Nov 2007 14:37:16 -0700
  • Donald Bruckman Fri, 16 Nov 2007 12:10:04 -0700

• R value UBC97
  • Jeff Smith Thu, 29 Nov 2007 12:17:17 -0700
  • David Topete Thu, 29 Nov 2007 14:58:56 -0700
  • Jeff Smith Mon, 3 Dec 2007 11:57:11 -0700
  • Paul Feather Mon, 3 Dec 2007 12:36:52 -0700

• Radiused angle ledger
  • Gerard Madden, SE Thu, 4 Oct 2007 15:33:18 -0600
  • Conrad Harrison Thu, 4 Oct 2007 18:37:47 -0600
  • Gary L. Hodgson and Assoc. Fri, 5 Oct 2007 05:49:36 -0600
  • Gerard Madden, SE Fri, 5 Oct 2007 11:02:39 -0600

• Reclaim Concrete Tunnel
  • Micayas, Julius Thu, 15 Nov 2007 09:50:32 -0700
  • Harold Sprague Thu, 15 Nov 2007 13:04:04 -0700

• Removing yourself as EOR
  • Lloyd Pack Wed, 12 Dec 2007 09:00:09 -0700
  • Daryl Richardson Wed, 12 Dec 2007 11:36:04 -0700
  • Garner, Robert Wed, 12 Dec 2007 11:44:44 -0700
  • Chuck Utzman Wed, 12 Dec 2007 12:01:26 -0700
  • David Fisher Wed, 12 Dec 2007 12:03:54 -0700
  • Rhkratzse Wed, 12 Dec 2007 12:37:44 -0700
  • Jeff Smith Wed, 12 Dec 2007 14:31:08 -0700
  • Jnapd Wed, 12 Dec 2007 14:41:41 -0700
  • Lloyd Pack Wed, 12 Dec 2007 19:22:15 -0700
  • Bill Allen Wed, 12 Dec 2007 20:39:42 -0700

• Responsiblity for local conditions
  • WISH DENNIS Tue, 20 Nov 2007 21:07:17 -0700
  • sscholl2(--nospam--at)juno.com Tue, 20 Nov 2007 21:45:00 -0700
  • Scott Maxwell Tue, 20 Nov 2007 22:04:15 -0700
  • Marlou Rodriguez Tue, 20 Nov 2007 22:09:45 -0700
  • David Topete Wed, 21 Nov 2007 09:44:55 -0700
  • Scott Maxwell Wed, 21 Nov 2007 10:18:29 -0700
  • Jordan Truesdell, PE Wed, 21 Nov 2007 10:59:25 -0700
  • WISH DENNIS Wed, 21 Nov 2007 13:49:20 -0700
  • WISH DENNIS Wed, 21 Nov 2007 14:34:34 -0700
  • WISH DENNIS Wed, 21 Nov 2007 14:42:57 -0700
  • Daryl Richardson Wed, 21 Nov 2007 18:27:55 -0700
  • sscholl2(--nospam--at)juno.com Sun, 25 Nov 2007 20:47:31 -0700

• Revit Structural
  • Rick Thu, 15 Nov 2007 09:24:35 -0700
  • David Fisher Thu, 15 Nov 2007 09:38:04 -0700
  • Rick Thu, 15 Nov 2007 10:24:17 -0700
  • Bill Allen Thu, 15 Nov 2007 12:40:13 -0700
  • Christopher Wright Thu, 15 Nov 2007 12:54:28 -0700
  • Mark Deardorff Thu, 15 Nov 2007 13:32:37 -0700
  • domdean Thu, 15 Nov 2007 13:44:29 -0700
  • Bill Allen Thu, 15 Nov 2007 13:47:43 -0700
  • Mark Deardorff Thu, 15 Nov 2007 13:59:02 -0700
  • Bill Polhemus Thu, 15 Nov 2007 14:16:03 -0700
  • Garner, Robert Thu, 15 Nov 2007 14:23:01 -0700
  • Bill Polhemus Sat, 17 Nov 2007 22:54:27 -0700
  • Scott Maxwell Sun, 18 Nov 2007 04:24:26 -0700
  • Bill Polhemus Sun, 18 Nov 2007 17:07:17 -0700
  • Scott Maxwell Mon, 19 Nov 2007 18:53:28 -0700

• Re: Revit Structural (vista/xp)
  • Jordan Truesdell, PE Sun, 18 Nov 2007 07:15:14 -0700

• Roof Diaphragm Analysis
  • mail Wed, 5 Dec 2007 07:38:59 -0700

• S1 and Ss by address
  • Mark Deardorff Thu, 4 Oct 2007 12:24:39 -0600
  • Paul Blomberg Thu, 4 Oct 2007 12:28:46 -0600
  • John Atilano Thu, 4 Oct 2007 12:35:30 -0600
  • Scott Maxwell Thu, 4 Oct 2007 13:52:21 -0600

• RE: S1 and Ss by address (handy-dandy link)
  • Casey K. Hemmatyar Thu, 4 Oct 2007 12:33:48 -0600

• Santa Monica Seminar
  • Steve Gordin Sat, 15 Dec 2007 06:37:18 -0700
  • ndz28 Sat, 15 Dec 2007 21:11:20 -0700
  • Abolhassan Astaneh-Asl Sun, 16 Dec 2007 05:21:20 -0700
  • Paul Blomberg Mon, 17 Dec 2007 09:04:18 -0700
  • Yi Yang Mon, 17 Dec 2007 18:07:27 -0700
  • Ben Yousefi Tue, 18 Dec 2007 13:38:01 -0700
  • Tom . Hunt Tue, 18 Dec 2007 13:40:36 -0700
  • Casey K. Hemmatyar Tue, 18 Dec 2007 15:44:03 -0700
  • ASLCSE Thu, 20 Dec 2007 11:02:29 -0700

• Scott Threewitt is out of the office.
  • SThreewitt Sat, 22 Dec 2007 03:02:04 -0700

• SE books/references available
  • SE California Tue, 16 Oct 2007 10:13:13 -0600

• SE Practice Act
  • Jake Watson Thu, 1 Nov 2007 19:55:21 -0600
  • Scott Maxwell Thu, 1 Nov 2007 21:43:28 -0600
  • Jerry Coombs Fri, 2 Nov 2007 07:39:46 -0600
  • Scott Maxwell Fri, 2 Nov 2007 09:23:58 -0600
  • Tom Skaggs Fri, 2 Nov 2007 11:23:40 -0600
  • Jnapd Fri, 2 Nov 2007 11:50:17 -0600

• Re: seaint Digest for 2 Nov 2007
  • Paul Ransom Sat, 3 Nov 2007 09:25:48 -0600

• RE: seaint Digest for 30 Sep 2007
  • ZhangMichael Mon, 1 Oct 2007 07:32:35 -0600

• SEAW's Handbook of a Rapid-Solutions Methodology for Wind Design
  • WISH DENNIS Tue, 20 Nov 2007 15:47:57 -0700

• SEISMIC: Seismic Factors for Qatar
  • bill Mon, 1 Oct 2007 14:34:15 -0600
  • Neil Moore Mon, 1 Oct 2007 14:47:35 -0600
  • bill Mon, 1 Oct 2007 14:56:03 -0600
  • David Topete Mon, 1 Oct 2007 14:58:05 -0600
  • Micayas, Julius Mon, 1 Oct 2007 15:05:45 -0600

• Self-straining Force
  • Mark Deardorff Tue, 6 Nov 2007 14:39:48 -0700
  • Acharya, Suresh Tue, 6 Nov 2007 14:47:01 -0700
  • Mark Deardorff Tue, 6 Nov 2007 15:03:45 -0700

• Seminar on Blast Protection of Bridges
  • Abolhassan Astaneh-Asl Mon, 1 Oct 2007 20:48:19 -0600

• Shamefully Off-Topic: Carbon Christmas
  • Stan Caldwell Fri, 14 Dec 2007 11:12:52 -0700
  • Cummings, Thomas J. Fri, 14 Dec 2007 11:25:34 -0700
  • Christopher Wright Fri, 14 Dec 2007 11:42:56 -0700
  • Garner, Robert Fri, 14 Dec 2007 11:51:42 -0700
  • Jeff Smith Fri, 14 Dec 2007 19:09:06 -0700
  • Michel Fri, 21 Dec 2007 18:00:42 -0700

• Shear Connector Design in Precast Sandwich Panel.
  • Wontae Kim Thu, 18 Oct 2007 06:57:06 -0600

• slabs on grade...
  • David Fisher Mon, 29 Oct 2007 09:47:04 -0600
  • Jerry Coombs Mon, 29 Oct 2007 09:58:39 -0600
  • Rhkratzse Mon, 29 Oct 2007 10:00:19 -0600
  • Scott Maxwell Mon, 29 Oct 2007 11:11:52 -0600
  • Jerry Coombs Mon, 29 Oct 2007 12:06:08 -0600
  • Richard L. Hess Mon, 29 Oct 2007 14:07:03 -0600
  • Mark L. Puccio Tue, 30 Oct 2007 07:39:02 -0600
  • Richard L. Hess Tue, 30 Oct 2007 11:02:44 -0600
  • Mark Deardorff Tue, 30 Oct 2007 12:16:04 -0600

• RE: Slide Rule Era
  • Larry Bryant Wed, 14 Nov 2007 17:25:21 -0700

• RE: Slide Rule Era (Cofar metal decking )
  • Casey K. Hemmatyar Wed, 14 Nov 2007 16:16:56 -0700
  • Harold Sprague Thu, 15 Nov 2007 09:40:00 -0700

• Sloped Rafter Bearing
  • Doug Mayer Tue, 4 Dec 2007 10:24:04 -0700
  • Rhkratzse Tue, 4 Dec 2007 10:27:27 -0700
  • Doug Mayer Tue, 4 Dec 2007 10:35:33 -0700
  • Rhkratzse Tue, 4 Dec 2007 11:05:19 -0700
  • Jnapd Tue, 4 Dec 2007 13:06:52 -0700
  • Doug Mayer Tue, 4 Dec 2007 18:08:53 -0700
  • Jnapd Tue, 4 Dec 2007 18:35:54 -0700
  • Doug Mayer Tue, 4 Dec 2007 20:33:19 -0700
  • Conrad Harrison Tue, 4 Dec 2007 20:51:53 -0700
  • Jnapd Wed, 5 Dec 2007 10:47:24 -0700

• Small Job on the Westside (I think it's Beverly Hills, but I'm not sure)
  • Bill Allen Mon, 31 Dec 2007 16:58:14 -0700

• Snow drift
  • Wesley Werner Tue, 18 Dec 2007 08:04:20 -0700
  • Stuart, Matthew Tue, 18 Dec 2007 09:21:13 -0700
  • Wesley Werner Tue, 18 Dec 2007 09:32:57 -0700
  • Jason Christensen Tue, 18 Dec 2007 10:10:42 -0700
  • Drew Morris Tue, 18 Dec 2007 13:06:08 -0700
  • Harold Sprague Tue, 18 Dec 2007 15:56:54 -0700
  • Dmitri Wright Wed, 19 Dec 2007 10:31:15 -0700

• snow drift and adjacent buildings
  • Alden Manipula Thu, 8 Nov 2007 14:36:20 -0700
  • Martin Li Thu, 8 Nov 2007 15:03:35 -0700
  • Alden Manipula Fri, 9 Nov 2007 09:04:23 -0700
  • Alden Manipula Mon, 12 Nov 2007 08:24:56 -0700

• Snow load in Stowe VT?
  • Rhkratzse Thu, 15 Nov 2007 15:43:36 -0700

• Special CMU walls
  • Jason Christensen Wed, 19 Dec 2007 21:30:21 -0700
  • Jeff Hedman Thu, 20 Dec 2007 11:09:31 -0700
  • Jnapd Thu, 20 Dec 2007 11:56:01 -0700

• Stability of highrise buildings for seismic loads
  • Brijbhushan J. Gupta Sun, 30 Dec 2007 09:29:22 -0700
  • Scott Maxwell Mon, 31 Dec 2007 23:41:54 -0700

• Staggered Plywood roof sheathing
  • WISH DENNIS Wed, 5 Dec 2007 16:42:07 -0700
  • David Topete Wed, 5 Dec 2007 16:56:08 -0700
  • ASLCSE Wed, 5 Dec 2007 19:37:15 -0700

• Stair stringer design for continuous kinked stringer
  • Jim Wilson Mon, 10 Dec 2007 08:38:19 -0700
  • Conrad Harrison Mon, 10 Dec 2007 21:57:35 -0700
  • Gary L. Hodgson and Assoc. Tue, 11 Dec 2007 05:54:05 -0700
  • Jim Wilson Tue, 11 Dec 2007 06:35:59 -0700
  • Bill Allen Tue, 11 Dec 2007 09:13:27 -0700

• re: steel flitch plate
  • Andrew Kester, P.E. Wed, 17 Oct 2007 13:16:03 -0600
  • Scott Maxwell Thu, 18 Oct 2007 02:50:37 -0600

• Steel Plate Shear Walls
  • David Merrick Tue, 23 Oct 2007 13:15:18 -0600
  • Gerard Madden, SE Tue, 23 Oct 2007 14:52:34 -0600
  • Abolhassan Astaneh-Asl Wed, 24 Oct 2007 23:02:23 -0600

• Steel Shape Availability
  • Gerard Madden, SE Thu, 18 Oct 2007 14:01:36 -0600
  • Alexander Bausk Thu, 18 Oct 2007 14:17:48 -0600
  • Charles R. Ashley Jr. Fri, 19 Oct 2007 15:38:28 -0600

• Steel Shapes Booklet
  • Joseph R. Grill Tue, 9 Oct 2007 07:41:16 -0600
  • Tom . Hunt Tue, 9 Oct 2007 07:57:17 -0600
  • Joseph R. Grill Wed, 10 Oct 2007 08:15:46 -0600
  • ASLCSE Thu, 11 Oct 2007 10:16:35 -0600
  • Scott, William N Thu, 11 Oct 2007 10:30:57 -0600
  • Alexander Bausk Thu, 11 Oct 2007 10:37:47 -0600

• Steel SMRF beam connection
  • OSCAR HENRIQUEZ Wed, 21 Nov 2007 17:46:50 -0700
  • Shaun Dustin Sat, 24 Nov 2007 22:37:33 -0700
  • Jeff Smith Sun, 25 Nov 2007 13:40:25 -0700
  • Gerard Madden, SE Sun, 25 Nov 2007 16:16:20 -0700
  • Shaun Dustin Sun, 25 Nov 2007 21:21:00 -0700

• Strap and Tie-Down Systems Part 2 by Alfred Commins
  • WISH DENNIS Tue, 20 Nov 2007 16:01:41 -0700
  • Donald Bruckman Thu, 22 Nov 2007 10:51:05 -0700
  • Chuck Utzman Thu, 22 Nov 2007 11:28:18 -0700
  • Donald Bruckman Thu, 22 Nov 2007 11:55:06 -0700

• re: straw bale homes
  • Andrew Kester, P.E. Fri, 16 Nov 2007 16:04:10 -0700
  • Andrew Kester, PE Mon, 19 Nov 2007 09:31:07 -0700
  • Daryl Richardson Mon, 19 Nov 2007 11:01:44 -0700

• Re: Strawbale engineering
  • Gary L. Hodgson and Assoc. Mon, 19 Nov 2007 05:38:21 -0700
  • Thor Matteson, SE Tue, 20 Nov 2007 11:14:09 -0700
  • sscholl2(--nospam--at)juno.com Tue, 20 Nov 2007 22:01:53 -0700

• Strawbale engineering (was: sust. engr)
  • Jordan Truesdell, PE Sat, 17 Nov 2007 09:26:41 -0700
  • sscholl2(--nospam--at)juno.com Sun, 18 Nov 2007 19:13:52 -0700

• Strenth and Stiffness of 1x diagonal floor sheathing??
  • Bill Allen Tue, 2 Oct 2007 21:13:48 -0600
  • Robert Kazanjy Tue, 2 Oct 2007 21:58:26 -0600
  • Chuck Utzman Tue, 2 Oct 2007 23:49:17 -0600
  • Ehrlich, Gary Wed, 3 Oct 2007 06:53:36 -0600
  • Bill Allen Wed, 3 Oct 2007 06:55:44 -0600
  • IRV FRUCHTMAN Wed, 3 Oct 2007 07:38:08 -0600
  • AWC Info Wed, 3 Oct 2007 13:11:34 -0600
  • Bill Allen Wed, 3 Oct 2007 17:21:47 -0600

• Stresscore
  • James Cohen Tue, 2 Oct 2007 12:00:51 -0600
  • Tom . Hunt Tue, 2 Oct 2007 12:04:41 -0600
  • arshad vali Tue, 2 Oct 2007 16:35:44 -0600

• Structural Engineering Spreadsheets
  • Andre Sidler Fri, 2 Nov 2007 08:01:36 -0600
  • Christopher Banbury Fri, 2 Nov 2007 08:45:59 -0600
  • Shaun Dustin Fri, 2 Nov 2007 10:28:04 -0600
  • Jnapd Fri, 2 Nov 2007 12:13:37 -0600
  • Harouni Joseph Fri, 2 Nov 2007 12:26:26 -0600
  • Alexander Bausk Fri, 2 Nov 2007 12:27:44 -0600
  • Jnapd Fri, 2 Nov 2007 13:18:18 -0600
  • Garner, Robert Mon, 5 Nov 2007 08:10:22 -0700
  • Shaun Dustin Mon, 5 Nov 2007 08:26:21 -0700
  • Christopher Banbury Mon, 5 Nov 2007 08:32:33 -0700
  • Alexander Bausk Mon, 5 Nov 2007 11:34:43 -0700
  • Gary L. Hodgson and Assoc. Tue, 6 Nov 2007 05:41:35 -0700
  • Alexander Bausk Tue, 6 Nov 2007 07:01:56 -0700
  • Drew Morris Tue, 6 Nov 2007 11:58:51 -0700
  • David Merrick Tue, 6 Nov 2007 14:42:38 -0700
  • Gary L. Hodgson and Assoc. Mon, 12 Nov 2007 05:53:36 -0700
  • ASLCSE Fri, 16 Nov 2007 16:46:08 -0700

• RE: Structural Engineering Spreadsheets - new Excel Version with XLSX!
  • Neil Moore Tue, 6 Nov 2007 09:44:51 -0700

• RE: Structural Engineering Spreadsheets - new Excel Version with XLSX!
  • Neil Moore Tue, 6 Nov 2007 09:08:56 -0700
  • Wesley Werner Tue, 6 Nov 2007 09:20:42 -0700
  • Douglas Boyd Tue, 6 Nov 2007 09:43:00 -0700

• Re: Structural Engineering Spreadsheets - new Excel Version with XLSX!
  • Neil Moore Tue, 6 Nov 2007 08:19:36 -0700
  • Tom Skaggs Tue, 6 Nov 2007 08:36:21 -0700

• RE: Structural Engineering Spreadsheets - new Excel Version with XLSX! - thanks Microsoft
  • Haan, Scott M POA Tue, 6 Nov 2007 13:22:39 -0700
  • David Fisher Tue, 6 Nov 2007 13:24:29 -0700

• Structural Failure
  • Gary Loomis Sun, 4 Nov 2007 17:55:07 -0700
  • Jordan Truesdell, PE Sun, 4 Nov 2007 18:15:12 -0700
  • Bill Polhemus Sun, 4 Nov 2007 20:16:49 -0700
  • Gary Loomis Sun, 4 Nov 2007 23:02:37 -0700
  • Gary L. Hodgson and Assoc. Mon, 5 Nov 2007 06:01:05 -0700

• Subject: re: straw bale homes
  • Pinyon Engineering Fri, 16 Nov 2007 18:54:41 -0700

• Subject: Re: sustainable companies
  • Pinyon Engineering Thu, 15 Nov 2007 18:31:44 -0700
  • Jnapd Thu, 15 Nov 2007 18:58:29 -0700
  • Richard L. Hess Fri, 16 Nov 2007 12:52:28 -0700
  • Conrad Harrison Sun, 18 Nov 2007 17:57:08 -0700

• Sustainable companies
  • erik gibbs Fri, 9 Nov 2007 20:36:50 -0700
  • Christopher Wright Fri, 9 Nov 2007 21:35:04 -0700
  • Gerard Madden, SE Sat, 10 Nov 2007 01:17:42 -0700
  • Jordan Truesdell, PE Sat, 10 Nov 2007 05:23:17 -0700
  • Robert Jonkman Sat, 10 Nov 2007 07:34:03 -0700
  • Bill Polhemus Sun, 11 Nov 2007 06:33:29 -0700
  • Bill Polhemus Sun, 11 Nov 2007 06:34:18 -0700
  • erik gibbs Sun, 11 Nov 2007 11:11:45 -0700
  • Jordan Truesdell, PE Sun, 11 Nov 2007 11:38:01 -0700
  • Bill Polhemus Sun, 11 Nov 2007 11:45:55 -0700
  • Bill Polhemus Sun, 11 Nov 2007 11:48:12 -0700
  • erik gibbs Sun, 11 Nov 2007 18:21:52 -0700
  • Gary L. Hodgson and Assoc. Mon, 12 Nov 2007 05:37:54 -0700
  • Bill Polhemus Mon, 12 Nov 2007 05:38:51 -0700
  • Bill Polhemus Mon, 12 Nov 2007 05:39:35 -0700
  • Micayas, Julius Mon, 12 Nov 2007 07:23:49 -0700
  • Michel Blangy Mon, 12 Nov 2007 09:56:38 -0700
  • Shaun Dustin Mon, 12 Nov 2007 10:56:50 -0700
  • Rhkratzse Mon, 12 Nov 2007 11:39:56 -0700

• re: sustainable companies
  • Andrew Kester, P.E. Mon, 12 Nov 2007 13:10:25 -0700

• Re: Sustainable companies
  • erik gibbs Mon, 12 Nov 2007 13:34:04 -0700

• Re: sustainable companies
  • erik gibbs Mon, 12 Nov 2007 13:36:16 -0700
  • David Topete Mon, 12 Nov 2007 13:56:36 -0700
  • Gerard Madden, SE Mon, 12 Nov 2007 14:04:45 -0700
  • Mark Deardorff Mon, 12 Nov 2007 14:11:00 -0700
  • erik gibbs Mon, 12 Nov 2007 14:17:37 -0700
  • Scott Maxwell Mon, 12 Nov 2007 14:30:21 -0700
  • Bill Polhemus Mon, 12 Nov 2007 20:11:44 -0700

• Re: Sustainable companies
  • Bill Polhemus Mon, 12 Nov 2007 20:12:24 -0700
  • Mark D. Webster Tue, 13 Nov 2007 07:12:23 -0700

• Re: sustainable companies
  • Drew Morris Tue, 13 Nov 2007 11:15:22 -0700
  • Andrew Kester, P.E. Tue, 13 Nov 2007 11:20:23 -0700
  • Rhkratzse Fri, 7 Dec 2007 14:04:45 -0700

• Re: Sustainable companies/global warming
  • Michel Sun, 11 Nov 2007 13:10:27 -0700

• technical References and Advice of CMU Wall Cracking
  • jerold taylor Fri, 21 Dec 2007 13:11:51 -0700
  • Richard L. Hess Fri, 21 Dec 2007 14:32:49 -0700
  • Scott Maxwell Fri, 21 Dec 2007 16:46:26 -0700
  • jerold taylor Fri, 21 Dec 2007 20:48:46 -0700
  • jerold taylor Fri, 21 Dec 2007 20:50:55 -0700
  • Scott Maxwell Fri, 21 Dec 2007 23:34:16 -0700
  • Richard Hess Sat, 22 Dec 2007 11:12:28 -0700
  • sscholl2(--nospam--at)juno.com Sat, 22 Dec 2007 12:43:54 -0700
  • jerold taylor Sat, 22 Dec 2007 13:01:31 -0700

• TEDDS Software
  • Garner, Robert Mon, 22 Oct 2007 13:54:27 -0600
  • Brian K. Smith Mon, 22 Oct 2007 14:06:46 -0600
  • Shaun Dustin Mon, 22 Oct 2007 14:29:22 -0600
  • Brian K. Smith Mon, 22 Oct 2007 14:37:27 -0600
  • Gary L. Hodgson and Assoc. Tue, 23 Oct 2007 05:53:16 -0600
  • Gary L. Hodgson and Assoc. Tue, 23 Oct 2007 06:00:16 -0600
  • Marlou Rodriguez Tue, 23 Oct 2007 10:35:08 -0600
  • Brian K. Smith Tue, 23 Oct 2007 11:17:40 -0600
  • Micayas, Julius Tue, 23 Oct 2007 12:11:07 -0600
  • Micayas, Julius Tue, 23 Oct 2007 12:20:58 -0600
  • Brian K. Smith Tue, 23 Oct 2007 12:32:31 -0600
  • Bill Allen Tue, 23 Oct 2007 12:33:14 -0600
  • Brian K. Smith Tue, 23 Oct 2007 13:39:46 -0600

• threaded rod couplers
  • Christopher Banbury Thu, 29 Nov 2007 09:53:47 -0700
  • Tom . Hunt Thu, 29 Nov 2007 10:44:45 -0700
  • Robert Kazanjy Thu, 29 Nov 2007 11:11:41 -0700

• re: tilt-up + PEMB
  • Andrew Kester, PE Tue, 2 Oct 2007 10:15:51 -0600
  • Paul Ransom Wed, 3 Oct 2007 20:08:28 -0600

• Tilt-Up Wall Submittal Review
  • Rich Lewis Thu, 13 Dec 2007 20:00:11 -0700
  • Jake Watson Thu, 13 Dec 2007 21:17:36 -0700
  • Jerry Coombs Fri, 14 Dec 2007 06:55:01 -0700
  • Bill Allen Fri, 14 Dec 2007 08:45:17 -0700
  • Christopher Banbury Fri, 14 Dec 2007 09:26:20 -0700
  • Mark Gilligan Fri, 14 Dec 2007 10:04:07 -0700

• timber pedestrian bridge
  • Christopher Banbury Thu, 20 Dec 2007 15:18:20 -0700
  • Scott Maxwell Thu, 20 Dec 2007 19:01:17 -0700
  • AWC Info Fri, 21 Dec 2007 06:40:16 -0700

• Tongue & Groove Deck Diaphragm Capacities using horizontal Steel Spikes
  • Stuart, Matthew Wed, 17 Oct 2007 06:28:39 -0600

• RE: Tool for calculation of Sesimic Design Categoty (SDC) per 200 6 IBC / ASCE7-05
  • Acharya, Suresh Mon, 29 Oct 2007 12:50:54 -0600

• Tool for calculation of Sesimic Design Categoty (SDC) per 2006 IB C / ASCE7-05
  • Acharya, Suresh Thu, 25 Oct 2007 13:20:30 -0600

• RE: Tool for calculation of Sesimic Design Categoty (SDC) per 2006 IBC / ASCE7-05
  • Casey K. Hemmatyar Thu, 25 Oct 2007 15:20:03 -0600
  • Bill Allen Mon, 29 Oct 2007 13:17:53 -0600

• Transfer force of large tie beam
  • Rich Lewis Sun, 11 Nov 2007 21:14:59 -0700
  • Jordan Truesdell, PE Mon, 12 Nov 2007 07:07:05 -0700
  • seaint04 Mon, 12 Nov 2007 08:36:00 -0700
  • Jordan Truesdell, PE Mon, 12 Nov 2007 08:46:58 -0700
  • seaint04 Mon, 12 Nov 2007 09:51:30 -0700
  • Andrew Kester, P.E. Mon, 12 Nov 2007 12:45:08 -0700
  • seaint04 Mon, 12 Nov 2007 12:55:40 -0700
  • Harold Sprague Mon, 12 Nov 2007 20:45:41 -0700
  • James Hannah Mon, 12 Nov 2007 22:01:33 -0700
  • Donald Bruckman Tue, 13 Nov 2007 10:07:03 -0700
  • Harold Sprague Tue, 13 Nov 2007 17:43:13 -0700
  • Bill Polhemus Wed, 14 Nov 2007 04:51:21 -0700

• Transfer Girder Design having more Depth
  • Samiappan Srinivasan Tue, 13 Nov 2007 23:53:00 -0700
  • Scott Maxwell Wed, 14 Nov 2007 08:18:41 -0700
  • Josh Plummer Wed, 14 Nov 2007 18:56:03 -0700
  • Gil Brock Wed, 14 Nov 2007 19:09:29 -0700
  • Josh Plummer Thu, 15 Nov 2007 09:48:25 -0700

• Try to archive SEAINT mail at Google Groups
  • A. J. Young Wed, 24 Oct 2007 20:58:12 -0600
  • A. J. Young Wed, 24 Oct 2007 23:37:10 -0600
  • Tom . Hunt Thu, 25 Oct 2007 07:50:52 -0600
  • Tom . Hunt Thu, 25 Oct 2007 07:51:27 -0600
  • Trib K Mittra Thu, 25 Oct 2007 13:30:57 -0600

• UBC 1630.8.2.2.1.7 Bracing Load
  • Bill Allen Wed, 3 Oct 2007 18:37:16 -0600
  • Conrad Harrison Wed, 3 Oct 2007 18:47:50 -0600
  • David Topete Wed, 3 Oct 2007 19:01:19 -0600
  • Ed Najjarine, SE Thu, 4 Oct 2007 01:56:58 -0600
  • Wesley Werner Thu, 4 Oct 2007 06:06:47 -0600
  • Jim Lutz Thu, 4 Oct 2007 09:18:36 -0600
  • Bill Allen Thu, 4 Oct 2007 12:06:23 -0600
  • Paul Blomberg Thu, 4 Oct 2007 12:21:41 -0600
  • Jim Persing Mon, 8 Oct 2007 09:08:21 -0600
  • Reza Dashti Asl Tue, 9 Oct 2007 14:23:13 -0600
  • Kevin Below Tue, 9 Oct 2007 19:07:40 -0600
  • Paul Ransom Wed, 10 Oct 2007 22:05:13 -0600
  • Jim Persing Thu, 11 Oct 2007 16:22:54 -0600
  • Reza Dashti Asl Thu, 11 Oct 2007 20:09:15 -0600
  • Kevin Below Thu, 11 Oct 2007 20:21:49 -0600
  • Jim Persing Fri, 12 Oct 2007 14:22:11 -0600

• UBC Wind Uplift on Fabric Shade Cover
  • Bill Allen Wed, 31 Oct 2007 12:26:01 -0600
  • Acharya, Suresh Wed, 31 Oct 2007 12:38:32 -0600
  • DRPFLY Wed, 31 Oct 2007 13:05:37 -0600
  • Jeff Coronado Thu, 15 Nov 2007 10:20:59 -0700

• underground house
  • Christopher Banbury Thu, 29 Nov 2007 07:54:24 -0700
  • Rhkratzse Thu, 29 Nov 2007 08:01:14 -0700
  • Jerry Coombs Thu, 29 Nov 2007 10:47:43 -0700
  • Jerry Coombs Thu, 29 Nov 2007 10:50:03 -0700
  • Rhkratzse Thu, 29 Nov 2007 10:57:50 -0700
  • Jerry Coombs Thu, 29 Nov 2007 11:03:25 -0700
  • Jeff Smith Thu, 29 Nov 2007 12:33:13 -0700
  • Richard L. Hess Thu, 29 Nov 2007 14:59:54 -0700
  • Bill Allen Thu, 29 Nov 2007 15:59:02 -0700
  • Jordan Truesdell, PE Fri, 30 Nov 2007 10:50:34 -0700
  • Chuck Utzman Fri, 30 Nov 2007 11:37:31 -0700
  • Garner, Robert Fri, 30 Nov 2007 11:52:39 -0700
  • Jeff Smith Fri, 30 Nov 2007 12:12:06 -0700
  • Richard L. Hess Fri, 30 Nov 2007 14:50:49 -0700
  • Donald Bruckman Fri, 30 Nov 2007 16:07:41 -0700
  • sscholl2(--nospam--at)juno.com Sun, 2 Dec 2007 21:08:18 -0700
  • Chuck Utzman Sun, 2 Dec 2007 21:36:50 -0700
  • Richard L. Hess Mon, 3 Dec 2007 12:46:57 -0700

• Re: underground house [gettin' pretty OT now]
  • Rhkratzse Thu, 29 Nov 2007 15:26:03 -0700
  • Chuck Utzman Thu, 29 Nov 2007 16:38:03 -0700
  • Richard L. Hess Thu, 29 Nov 2007 19:07:41 -0700
  • Jeff Smith Thu, 29 Nov 2007 19:19:54 -0700

• Uplift on Footings: Superior Foundation Walls
  • Eric Tompos Wed, 21 Nov 2007 07:06:35 -0700
  • Jordan Truesdell, PE Wed, 21 Nov 2007 11:05:39 -0700

• Uplift on Roof Sheathing - "Pull Through" Resistance
  • jerold taylor Wed, 12 Dec 2007 09:58:10 -0700
  • Gaines, David Wed, 12 Dec 2007 10:29:10 -0700
  • Daryl Richardson Wed, 12 Dec 2007 10:47:25 -0700
  • Donald Bruckman Wed, 12 Dec 2007 11:32:55 -0700
  • Tom Skaggs Wed, 12 Dec 2007 11:37:39 -0700
  • Thor Matteson Thu, 13 Dec 2007 23:11:42 -0700

• USGS Web address for determining IBC SDC and Base Shear
  • WISH DENNIS Tue, 13 Nov 2007 21:29:26 -0700
  • DA Tue, 13 Nov 2007 21:56:28 -0700
  • Mark Gilligan Tue, 13 Nov 2007 23:51:17 -0700
  • Bill Polhemus Wed, 14 Nov 2007 04:45:51 -0700
  • Garner, Robert Wed, 14 Nov 2007 07:53:16 -0700
  • David Topete Wed, 14 Nov 2007 09:36:43 -0700
  • Mark Deardorff Wed, 14 Nov 2007 11:19:53 -0700
  • Jason Emoto Wed, 14 Nov 2007 11:24:59 -0700
  • WISH DENNIS Thu, 15 Nov 2007 20:53:03 -0700
  • Larry Hauer Fri, 16 Nov 2007 07:31:21 -0700
  • Paul Blomberg Fri, 16 Nov 2007 10:06:53 -0700

• re: variable pitch connectors
  • Andrew Kester, P.E. Wed, 5 Dec 2007 06:24:46 -0700

• virus found in SE files
  • David Merrick Sat, 10 Nov 2007 06:59:25 -0700

• water proof
  • DA ENGINEERING Mon, 5 Nov 2007 14:52:55 -0700
  • Gerard Madden, SE Mon, 5 Nov 2007 21:59:51 -0700
  • Jerry Coombs Tue, 6 Nov 2007 06:37:51 -0700
  • Martin Li Tue, 6 Nov 2007 08:28:53 -0700
  • Chuck Utzman Tue, 6 Nov 2007 09:47:14 -0700

• waterproofing
  • Bob Freeman Tue, 6 Nov 2007 12:03:14 -0700

• waterproofing retaining wall at the beach and scouring
  • Bob Freeman Tue, 6 Nov 2007 10:01:50 -0700
  • DA ENGINEERING Tue, 6 Nov 2007 11:20:08 -0700

• re: waterproofing, etc
  • Andrew Kester, P.E. Fri, 30 Nov 2007 13:51:02 -0700

• weld symbols
  • Jerry Coombs Thu, 29 Nov 2007 11:50:05 -0700
  • Doug Mayer Thu, 29 Nov 2007 11:54:50 -0700
  • Tom . Hunt Thu, 29 Nov 2007 12:04:48 -0700
  • Conrad Harrison Thu, 29 Nov 2007 20:16:47 -0700
  • Gary L. Hodgson and Assoc. Fri, 30 Nov 2007 09:24:10 -0700

• welded wire fabric for columns
  • David Topete Mon, 10 Dec 2007 16:31:58 -0700
  • Jim Getaz Tue, 11 Dec 2007 05:46:05 -0700
  • David Topete Tue, 11 Dec 2007 09:54:21 -0700
  • Jnapd Tue, 11 Dec 2007 13:25:03 -0700
  • David Topete Tue, 11 Dec 2007 14:48:59 -0700
  • Jnapd Tue, 11 Dec 2007 15:29:38 -0700
  • Jim Getaz Wed, 12 Dec 2007 06:09:50 -0700
  • Jnapd Wed, 12 Dec 2007 09:49:51 -0700

• WG: footings look too big
  • alfred mueller Tue, 6 Nov 2007 00:31:43 -0700

• Why 0.2 and 1 sec for Ss and S1?
  • Wontae Kim Wed, 5 Dec 2007 06:02:36 -0700
  • Harold Sprague Thu, 6 Dec 2007 15:05:49 -0700

• Why are my messages showing up twice?
  • Jeff Smith Sun, 25 Nov 2007 13:49:39 -0700
  • Gerard Madden, SE Sun, 25 Nov 2007 16:21:30 -0700
  • Thor Tandy Sun, 25 Nov 2007 18:58:13 -0700

• RE: wide flange beam to jst girder
  • Andrew Kester, P.E. Wed, 28 Nov 2007 09:53:53 -0700
  • Gary Loomis Wed, 28 Nov 2007 11:18:42 -0700

• Wide flange bearing connection
  • Jason Christensen Mon, 26 Nov 2007 15:04:55 -0700
  • Paul Feather Mon, 26 Nov 2007 16:49:09 -0700
  • Jason Christensen Mon, 26 Nov 2007 17:02:53 -0700
  • Stuart, Matthew Mon, 26 Nov 2007 17:16:00 -0700
  • Jeremy White Mon, 26 Nov 2007 17:30:23 -0700
  • Jason Christensen Tue, 27 Nov 2007 08:47:06 -0700
  • Jason Christensen Tue, 27 Nov 2007 08:49:12 -0700

• Wind drift
  • Mark Deardorff Thu, 1 Nov 2007 16:51:45 -0600
  • Drew Morris Thu, 1 Nov 2007 16:58:41 -0600
  • Jeff Smith Thu, 1 Nov 2007 17:29:20 -0600
  • Haan, Scott M POA Thu, 1 Nov 2007 17:36:33 -0600
  • Casey K. Hemmatyar Thu, 1 Nov 2007 17:50:05 -0600
  • Scott Maxwell Thu, 1 Nov 2007 18:55:55 -0600
  • Jerry Coombs Fri, 2 Nov 2007 06:25:17 -0600
  • Brian K. Smith Fri, 2 Nov 2007 08:13:43 -0600
  • Charles R. Ashley Jr. Wed, 7 Nov 2007 09:09:20 -0700
  • Rhkratzse Wed, 7 Nov 2007 11:23:25 -0700
  • Scott Maxwell Wed, 7 Nov 2007 14:50:50 -0700
  • Rhkratzse Wed, 7 Nov 2007 15:16:56 -0700
  • Scott Maxwell Wed, 7 Nov 2007 16:31:54 -0700
  • Harold Sprague Thu, 8 Nov 2007 09:44:38 -0700

• wind load calc's progrm
  • DA ENGINEERING Mon, 24 Dec 2007 10:51:14 -0700
  • Rich Lewis Tue, 25 Dec 2007 13:20:14 -0700

• Wind Speeds in California
  • Mark Gilligan Wed, 21 Nov 2007 00:39:59 -0700
  • Paul Feather Wed, 21 Nov 2007 11:53:20 -0700

• Wind tower design
  • Kevin Below Fri, 16 Nov 2007 20:02:52 -0700
  • Harold Sprague Mon, 19 Nov 2007 10:17:32 -0700
  • Kevin Below Mon, 19 Nov 2007 10:54:55 -0700
  • Daryl Richardson Mon, 19 Nov 2007 11:54:02 -0700
  • Daryl Richardson Mon, 19 Nov 2007 11:58:25 -0700
  • Kevin Below Mon, 19 Nov 2007 18:12:23 -0700
  • Ashraf Manjappara Tue, 20 Nov 2007 02:10:42 -0700
  • Harold Sprague Wed, 21 Nov 2007 10:01:48 -0700
  • Kevin Below Wed, 21 Nov 2007 21:06:04 -0700
  • Conrad Harrison Wed, 21 Nov 2007 21:20:08 -0700
  • Kevin Below Wed, 21 Nov 2007 21:49:29 -0700
  • Gary L. Hodgson and Assoc. Thu, 22 Nov 2007 06:13:18 -0700
  • Harold Sprague Sat, 24 Nov 2007 12:51:45 -0700
  • Robert Kazanjy Sat, 24 Nov 2007 18:10:18 -0700
  • Harold Sprague Sun, 25 Nov 2007 20:27:12 -0700
  • Conrad Harrison Sun, 25 Nov 2007 20:38:31 -0700
  • Robert Kazanjy Sun, 25 Nov 2007 21:24:08 -0700

• wind uplift + lateral loads
  • Andrew Kester, P.E. Wed, 24 Oct 2007 10:17:30 -0600
  • Brian K. Smith Wed, 24 Oct 2007 10:34:21 -0600
  • Mark Deardorff Wed, 24 Oct 2007 11:30:02 -0600

• Wind Uplift on Footings
  • Bill Allen Tue, 20 Nov 2007 13:57:43 -0700
  • Steve Gordin Tue, 20 Nov 2007 14:23:53 -0700
  • Neil Moore Tue, 20 Nov 2007 14:24:56 -0700
  • Garner, Robert Tue, 20 Nov 2007 14:31:02 -0700
  • Bill Allen Tue, 20 Nov 2007 18:05:07 -0700
  • WISH DENNIS Tue, 20 Nov 2007 18:54:40 -0700
  • Bill Allen Tue, 20 Nov 2007 19:38:08 -0700
  • Marlou Rodriguez Tue, 20 Nov 2007 21:58:41 -0700
  • Mark Gilligan Wed, 21 Nov 2007 00:26:28 -0700
  • Harold Sprague Wed, 21 Nov 2007 14:10:16 -0700
  • Javier Encinas Wed, 21 Nov 2007 14:22:42 -0700
  • Bill Allen Wed, 21 Nov 2007 14:30:47 -0700
  • Drew Morris Wed, 21 Nov 2007 14:56:37 -0700
  • James Hannah Wed, 21 Nov 2007 21:50:14 -0700

• Wood column with steel flitch plate
  • Scott Maxwell Tue, 16 Oct 2007 01:25:45 -0600
  • Jerry Coombs Tue, 16 Oct 2007 05:30:13 -0600
  • Gary L. Hodgson and Assoc. Tue, 16 Oct 2007 05:56:59 -0600
  • Jordan Truesdell, PE Tue, 16 Oct 2007 07:21:10 -0600
  • Bill Allen Tue, 16 Oct 2007 08:13:01 -0600
  • Scott Maxwell Tue, 16 Oct 2007 08:13:27 -0600

• Wood Framed 2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D Requirements ?
  • Freeman C. Tang Wed, 12 Dec 2007 23:19:20 -0700
  • Jeff Smith Thu, 13 Dec 2007 12:13:21 -0700

---

Mail converted by MHonArc