SEAINT

 

INTRO

 

SEARCH
ARCHIVE

 

NEED
A BOOK?

 

2010
Jan-Mar
Apr-Jun
Jul-Sep

 

2009
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2008
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2007
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2006
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2005
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2004
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2003
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2002
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2001
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

2000
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1999
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1998
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

1997
Jan-Jun
Jul-Sep
Oct-Dec

1996
Jan-Jun
Jul-Dec

 

1995
Jul-Dec

 

HOME

Some recommendations...
 
 

 
 

---

SEAINT Mail Archive 2008 (Jan-Mar)

Civil and Structural Engineering discussions by author

www.seaintarchive.org

• About this archive / Index
• Messages sorted by: [Thread] [Subject] [Date]

Site Search: Need a book? Civil and Structural Engineering book recommendations...
 

---

Messages: 1592

• Alfred Müller
  • AW: Splicing of steel beam. Sat, 19 Jan 2008 10:11:25 -0700

• Chris Hewitt
  • Re: AISC eLearning Fri, 29 Feb 2008 16:04:03 -0700

• abdolnasir kiswani
  • subgrade modulus Tue, 25 Mar 2008 15:38:54 -0600

• Abolhassan Astaneh-Asl
  • [Fwd: Judge says Corps of Engineers is responsible for the New Orleans flooding!] Thu, 21 Feb 2008 12:43:20 -0700
  • What is 2t plastic hinge gusset plate design? Thu, 27 Mar 2008 20:08:28 -0600
  • DeSoto Bridge Gusset Plate Damage-Minnesota Fri, 28 Mar 2008 16:10:16 -0600
  • DeSoto Bridge Gusset Plate Damage-Minnesota Sun, 30 Mar 2008 15:42:42 -0600

• Acharya, Suresh
  • RE: what's wrong - Soil Investigation Requirements Wed, 16 Jan 2008 10:20:15 -0700
  • RE: spacing limits for concrete beam shear reinforcement Tue, 12 Feb 2008 11:23:52 -0700
  • RE: Earthquake (experiencing) Thu, 21 Feb 2008 15:38:54 -0700
  • RE: ASCE 7-05 Cantilevered Columns? Mon, 25 Feb 2008 14:08:39 -0700
  • RE: Pipe Wall Strength -- go for Galambos(?) Tue, 18 Mar 2008 09:48:18 -0600
  • RE: Hand-held Calculator Recommended -- HP -10C Tue, 18 Mar 2008 10:05:10 -0600
  • RE: Place of Public Assembly Mon, 24 Mar 2008 13:14:05 -0600
  • RE: Book/reference on tower foundations Wed, 26 Mar 2008 12:41:32 -0600

• Adam Vakiener
  • RE: basic lateral force question Fri, 8 Feb 2008 05:21:35 -0700

• Adjebli
  • Re: Local Aspen Colorado Structural Engineer Needed Wed, 13 Feb 2008 23:05:57 -0700

• Ahkam Syahril
  • Ahkam Syahril is out of the office. Mon, 17 Mar 2008 03:09:27 -0600

• Al Commins
  • Viewing the List with MIME Thu, 14 Feb 2008 09:55:45 -0700

• Alex C. Nacionales
  • Re: Debonding of precast plank topping Wed, 2 Jan 2008 18:29:42 -0700
  • Re: Nonlinear Pushover Analysis Fri, 18 Jan 2008 06:05:12 -0700
  • Re: Nonlinear Pushover Analysis Fri, 18 Jan 2008 12:12:58 -0700
  • Re: Splicing of steel beam. Fri, 18 Jan 2008 13:50:48 -0700
  • Estimating Software Sun, 20 Jan 2008 11:37:22 -0700
  • Re: Splicing of steel beam. Sun, 20 Jan 2008 12:03:19 -0700
  • Sony Ericcson P990(off topic) Sun, 20 Jan 2008 12:14:26 -0700
  • Re: Estimating Software [and privacy] Mon, 21 Jan 2008 10:10:49 -0700
  • Re: Rebar Weight Mon, 21 Jan 2008 20:15:57 -0700
  • Re: steel connection software Tue, 22 Jan 2008 13:22:15 -0700
  • Rigid End Zone Wed, 23 Jan 2008 09:31:01 -0700
  • CMU Infills Fri, 25 Jan 2008 15:15:51 -0700
  • Re: CMU Infills Mon, 28 Jan 2008 15:21:05 -0700
  • Re: Gross overturning Thu, 31 Jan 2008 13:48:12 -0700
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 19:23:59 -0600
  • Re: Hand-held Calculator Recommended Wed, 19 Mar 2008 01:56:06 -0600

• Alexander (Sasha) Itsekson
  • Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 11:32:12 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate & bad EN Wed, 23 Jan 2008 19:45:36 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 19:46:35 -0700
  • RE: ASCE 7-05 Cantilevered Columns Sun, 17 Feb 2008 15:23:03 -0700
  • Perforate shear wall design and combined shear and uplift on edge nails Fri, 22 Feb 2008 12:56:15 -0700
  • RE: Availability of 3.5", 5.5" Wide DF/HF Structural Glued Laminated Timber Mon, 25 Feb 2008 16:32:51 -0700

• Alexander Bausk
  • Re: Splicing of steel beam Sat, 19 Jan 2008 01:36:12 -0700
  • Re: Base Plate design Thu, 28 Feb 2008 09:03:32 -0700
  • Re: Danish Wind Turbine disintegrating - Feb.27,2008 Mon, 17 Mar 2008 05:23:23 -0600
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 09:01:22 -0600

• Andre Sidler
  • Concrete Strength Requirements for Residential Projects in SDC D or Higher Fri, 4 Jan 2008 09:50:16 -0700
  • LatPro Analysis Software Wed, 30 Jan 2008 08:11:32 -0700

• Andrew Kester, P.E.
  • strange bldg dept request Thu, 17 Jan 2008 07:33:09 -0700
  • steel connections, Fully Restrained vs Partially Restrained Thu, 17 Jan 2008 17:31:20 -0700
  • re: beam splice Tue, 22 Jan 2008 11:47:55 -0700
  • steel connection software Tue, 22 Jan 2008 12:21:36 -0700
  • re: alumn handrails from China Fri, 25 Jan 2008 08:19:26 -0700
  • re: retrofit existing roof Mon, 4 Feb 2008 07:22:15 -0700
  • re: canopy wind loads Wed, 6 Feb 2008 16:03:54 -0700
  • Annoying and Inane Building Dept Requests, IV Thu, 7 Feb 2008 14:40:18 -0700
  • basic lateral force question Thu, 7 Feb 2008 17:26:06 -0700
  • Pre-$%!#&#& metal buildings Mon, 11 Feb 2008 18:55:52 -0700
  • wind load on garages Tue, 12 Feb 2008 07:40:03 -0700
  • fibermesh rates Wed, 13 Feb 2008 08:17:44 -0700
  • SOG/fibers cont... Thu, 14 Feb 2008 13:00:04 -0700
  • wind codes... Fri, 15 Feb 2008 14:14:05 -0700
  • re: ASD- masonry question Fri, 14 Mar 2008 10:06:54 -0600
  • stainless steel pipe Tue, 18 Mar 2008 17:55:10 -0600
  • Stainless Steel - answering my own question Tue, 18 Mar 2008 18:07:39 -0600
  • review of another SE's design... Fri, 21 Mar 2008 15:30:00 -0600
  • ASCE 7-05 wind program Tue, 25 Mar 2008 15:43:30 -0600

• Andrew Kester, PE
  • steel studs on columns? Wed, 23 Jan 2008 10:28:12 -0700
  • re: precast flat slabs Sat, 23 Feb 2008 12:14:51 -0700
  • harold on retainer Tue, 11 Mar 2008 07:19:03 -0600

• Andy Heigley
  • Base Plate design Thu, 28 Feb 2008 06:23:27 -0700
  • Re: Base Plate design Thu, 28 Feb 2008 07:50:37 -0700
  • Re: Base Plate design Thu, 28 Feb 2008 09:18:20 -0700

• arme
  • precast flat slabs Fri, 22 Feb 2008 01:40:20 -0700
  • Re: precast flat slabs Mon, 25 Feb 2008 00:30:50 -0700
  • Re: precast flat slabs Mon, 25 Feb 2008 01:25:05 -0700
  • Re: precast flat slabs Mon, 25 Feb 2008 05:42:48 -0700

• arshad vali
  • Re: Seismic load on retaining wall Thu, 20 Mar 2008 09:35:07 -0600

• Arturo Martinez
  • Seismic load on retaining wall Wed, 19 Mar 2008 08:54:25 -0600
  • RE: Seismic load on retaining wall Tue, 25 Mar 2008 22:10:22 -0600

• ASC
  • CALCULATOR Wed, 19 Mar 2008 01:51:51 -0600

• Ashwin Ranga Swamy
  • Archiving Trade Magazines Wed, 26 Mar 2008 18:25:38 -0600

• ASLCSE
  • Re: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 16 Jan 2008 14:46:01 -0700
  • Re: Enercalc 6.0 Thu, 17 Jan 2008 12:55:37 -0700
  • Re: Enercalc 6.0 Thu, 17 Jan 2008 13:06:12 -0700
  • ICC ESR REPORT 1772 & ICC ER 4945 (S.S.T. Epoxy) Thu, 17 Jan 2008 13:08:42 -0700
  • Re: ICC ESR REPORT 1772 & ICC ER 4945 (S.S.T. Epoxy) Thu, 17 Jan 2008 14:49:27 -0700
  • Re: ICC ESR REPORT 1772 & ICC ER 4945 (S.S.T. Epoxy) Thu, 17 Jan 2008 14:51:57 -0700
  • ASCE 7-05 Wind Forces Sat, 26 Jan 2008 14:21:03 -0700
  • Re: ASCE 7-05 Wind Forces Sun, 27 Jan 2008 14:51:58 -0700
  • Re: ASCE 7-05 Wind Forces Sun, 27 Jan 2008 14:52:43 -0700
  • Re: LatPro Lateral analysis software Tue, 29 Jan 2008 17:29:48 -0700
  • Re: More wierd Bldg Dept. requests Mon, 4 Feb 2008 10:57:20 -0700
  • ASCE 7-05 Wind Loads (10psf min.) Mon, 4 Feb 2008 11:11:05 -0700
  • Re: Another wind question Tue, 5 Feb 2008 11:19:54 -0700
  • Re: Question about Shear wall aspect ratio Wed, 6 Feb 2008 13:33:19 -0700
  • CBO Sat, 9 Feb 2008 09:56:11 -0700
  • Re: CBO Mon, 11 Feb 2008 20:01:43 -0700
  • Re: CBO Tue, 12 Feb 2008 09:39:26 -0700
  • Re: ASCE 7-05 Errata - Caution: content contains whining Mon, 18 Feb 2008 14:04:15 -0700
  • Re: ASCE 7-05 Errata - Caution: content contains whining Mon, 18 Feb 2008 14:06:01 -0700
  • Re: Chapter 17- IBC Thu, 21 Feb 2008 13:33:33 -0700
  • LARUCP Amendments Mon, 25 Feb 2008 11:39:05 -0700
  • Re: LARUCP Amendments Mon, 25 Feb 2008 14:36:39 -0700
  • Re: LARUCP Amendments Mon, 25 Feb 2008 15:09:55 -0700
  • Re: Simplified Seismic Fa Thu, 28 Feb 2008 13:22:35 -0700
  • Re: Enforcement Question Mon, 10 Mar 2008 17:21:52 -0600
  • Re: Enforcement Question Tue, 11 Mar 2008 11:31:17 -0600
  • Re: Enforcement Question Tue, 11 Mar 2008 11:39:45 -0600
  • Re: Permit, EOR & Enforcement Question Tue, 11 Mar 2008 12:57:35 -0600
  • Re: Seismic load on retaining wall Tue, 25 Mar 2008 21:44:03 -0600

• atc769
  • www.seismicfactor.com Fri, 28 Mar 2008 14:21:22 -0600

• AWC Info
  • about load duration factor Tue, 15 Jan 2008 06:59:26 -0700
  • FW: 3x3 square sill plate washers Wed, 23 Jan 2008 09:20:24 -0700
  • RE: seaint Digest for 2 Feb 2008 Mon, 4 Feb 2008 08:06:44 -0700
  • Another Timber Connection Questio Tue, 5 Feb 2008 09:35:55 -0700
  • RE: Minimum edge distance OR back to the treated lumber question..... Fri, 8 Feb 2008 06:28:33 -0700
  • Adjustment Factor in NDS Appendix N (resistance factor) Tue, 19 Feb 2008 08:41:51 -0700
  • Flagstaff, AZ Fri, 22 Feb 2008 06:57:59 -0700
  • FW: Perforate shear wall design and combined shear and uplift on edge Mon, 25 Feb 2008 08:16:02 -0700
  • FW: Wood LEED Fri, 14 Mar 2008 10:35:32 -0600
  • RE: Wood LEED Mon, 24 Mar 2008 11:33:44 -0600

• bart
  • Re: Glass guardrail support Fri, 4 Jan 2008 14:09:41 -0700
  • Re: Concrete exposed to seawater Sat, 1 Mar 2008 14:57:30 -0700

• Ben Yousefi
  • RE: Concrete Strength Requirements for Residential Projects in SDC D or Higher Fri, 4 Jan 2008 10:03:52 -0700
  • RE: Out of Line Building Official? Tue, 8 Jan 2008 16:52:45 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 12:03:51 -0700
  • RE: 3-D modeling - ASCE 7-05 12.7.3 needs an exception for light-frame timber Fri, 18 Jan 2008 15:26:56 -0700
  • RE: CBO Tue, 12 Feb 2008 09:04:38 -0700

• Benjamin Maxwell
  • Re: The More Things Change: NYT Article on Restoration of Utah State Capitol Building Wed, 23 Jan 2008 14:50:22 -0700
  • Re: CMU Infills Tue, 29 Jan 2008 10:20:05 -0700
  • Stainless Steel Washers... Tue, 29 Jan 2008 17:46:53 -0700
  • Re: ASTM Fri, 1 Feb 2008 13:44:46 -0700
  • Re: Stainless Steel Washers... Fri, 1 Feb 2008 14:08:00 -0700
  • RE: ASTM Fri, 1 Feb 2008 17:16:31 -0700
  • RE: DBAs and codes... Mon, 4 Feb 2008 12:31:20 -0700
  • Re: WARNING against using Staples in shear walls/diaphragms Wed, 6 Feb 2008 11:54:55 -0700
  • RE: WARNING against using Staples in shear walls/diaphragms Wed, 6 Feb 2008 14:14:29 -0700
  • Re: SDC C or D ... ? Wed, 6 Feb 2008 15:06:10 -0700
  • ASCE 3 Wed, 6 Feb 2008 17:59:08 -0700
  • RE: ASCE 3 Thu, 7 Feb 2008 09:36:39 -0700
  • Re: Fire wall/shear wall on property line Thu, 7 Feb 2008 09:42:57 -0700
  • Re: light gage steel framing Fri, 8 Feb 2008 10:09:38 -0700
  • Re: Shop Drawings Fri, 8 Feb 2008 10:24:55 -0700
  • Re: Fire wall/shear wall on property line Fri, 8 Feb 2008 10:40:06 -0700
  • RE: ASCE 3 follow up Fri, 8 Feb 2008 15:02:11 -0700
  • Re: Moving Walkway Seismic Restraint Mon, 11 Feb 2008 22:35:32 -0700
  • Re: Moving Walkway Seismic Restraint Tue, 12 Feb 2008 14:17:24 -0700
  • Re: fibermesh rates - Performance-Based Concrete... Wed, 13 Feb 2008 11:10:11 -0700
  • RE: fibermesh rates - Performance-Based Concrete... Wed, 13 Feb 2008 14:44:27 -0700
  • Steel Plate Engineering Data... Wed, 13 Feb 2008 16:21:09 -0700
  • Re: Steel Plate Engineering Data... Thu, 14 Feb 2008 00:13:38 -0700
  • Re: Alternate Wind Provision Fri, 15 Feb 2008 14:19:19 -0700
  • RE: SOG/fibers cont... Tue, 19 Feb 2008 10:06:43 -0700

• bill
  • RE: QUERY: Structural Clamps for Concrete Piles? Wed, 12 Mar 2008 08:36:35 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 08:36:01 -0600

• Bill Allen
  • RE: Small Job on the Westside (I think it's Beverly Hills, but I'm not sure) Tue, 1 Jan 2008 12:53:51 -0700
  • RE: Out of Line Building Official? Tue, 8 Jan 2008 17:01:51 -0700
  • RE: Out of Line Building Official? Tue, 8 Jan 2008 17:04:23 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 07:28:04 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 10:22:17 -0700
  • Flaw ID'd in MN Bridge Collapse Tue, 15 Jan 2008 14:45:44 -0700
  • RE: 3-D modeling Tue, 15 Jan 2008 19:09:52 -0700
  • RE: Flaw ID'd in MN Bridge Collapse Tue, 15 Jan 2008 19:39:09 -0700
  • RE: 3-D modeling Wed, 16 Jan 2008 08:58:57 -0700
  • RE: Anchors Thu, 17 Jan 2008 10:58:15 -0700
  • RE: Anchors Thu, 17 Jan 2008 12:30:35 -0700
  • RE: ICC ESR REPORT 1772 & ICC ER 4945 (S.S.T. Epoxy) Thu, 17 Jan 2008 13:20:25 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 13:46:01 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate & bad EN Wed, 23 Jan 2008 20:37:25 -0700
  • Slab On Grade STAAD Model Fri, 25 Jan 2008 11:06:09 -0700
  • RE: ASCE 7-05 Wind Forces Sun, 27 Jan 2008 09:15:04 -0700
  • RE: ASCE 7-05 Wind Forces Sun, 27 Jan 2008 15:19:08 -0700
  • Home Inspection Services in Orange County, CA? Thu, 31 Jan 2008 17:23:49 -0700
  • RE: More wierd Bldg Dept. requests Fri, 1 Feb 2008 09:46:18 -0700
  • RE: Steel shop drawings Fri, 1 Feb 2008 10:19:33 -0700
  • NDS 2005 Fe Sat, 2 Feb 2008 20:02:56 -0700
  • ASCE 7-05 Equivalent of CBC Section 1633.2.5 ?? Thu, 14 Feb 2008 17:08:01 -0700
  • RE: ASCE 7-05 Equivalent of CBC Section 1633.2.5 ?? Thu, 14 Feb 2008 17:13:03 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 17:34:25 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 18:54:04 -0700
  • RE: IBC 2007 Wind calcs. Mon, 18 Feb 2008 08:33:33 -0700
  • RE: IBC 2007 Wind calcs. Mon, 18 Feb 2008 08:34:11 -0700
  • ASCE 7-05 Errata - Caution: content contains whining Mon, 18 Feb 2008 13:23:21 -0700
  • RE: ASCE 7-05 Errata - Caution: content contains whining Mon, 18 Feb 2008 14:02:59 -0700
  • RE: Is a garage partially open, open or closed? Tue, 19 Feb 2008 09:46:56 -0700
  • Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 09:52:38 -0700
  • RE: Earthquake Thu, 21 Feb 2008 11:51:17 -0700
  • RE: Earthquake (experiencing) Thu, 21 Feb 2008 15:48:05 -0700
  • RE: Availability of 3.5", 5.5" Wide DF/HF Structural Glued Laminated Timber Sat, 23 Feb 2008 16:22:51 -0700
  • RE: ASD - Seismic Mon, 10 Mar 2008 11:30:39 -0600
  • ASCE 7-05 Cantilevered Column System vs. Inverted Pendulum-Type Structures Tue, 11 Mar 2008 12:59:08 -0600
  • RE: Wood LEED Fri, 14 Mar 2008 20:39:34 -0600
  • RE: Wood LEED Sat, 15 Mar 2008 08:37:48 -0600
  • RE: Wood LEED Sat, 15 Mar 2008 10:31:27 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 08:12:21 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 10:01:11 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 11:14:41 -0600
  • RE: approved epoxy anchor Mon, 24 Mar 2008 11:50:00 -0600
  • RE: Cantilever Column system Tue, 25 Mar 2008 11:33:23 -0600
  • Tremie Concrete Tue, 25 Mar 2008 12:31:37 -0600
  • RE: Tremie Concrete Tue, 25 Mar 2008 15:26:17 -0600

• Bill Polhemus
  • "Those who can't do..." Mon, 7 Jan 2008 09:48:25 -0700
  • UFC 3-340-01 "Design and Analysis of Hardened Structures to Conventional Weapons Effects" Tue, 8 Jan 2008 12:53:33 -0700
  • Re: Engineering Video Game for Students Tue, 22 Jan 2008 07:08:23 -0700
  • RE: steel connection software Tue, 22 Jan 2008 12:35:04 -0700
  • RE: load combo and retaining walls Tue, 22 Jan 2008 12:38:11 -0700
  • The More Things Change: NYT Article on Restoration of Utah State Capitol Building Tue, 22 Jan 2008 14:30:15 -0700
  • Re: ASCE 7-08 Wed, 23 Jan 2008 06:50:32 -0700
  • Re: ASCE 7-05 Wind Forces Sun, 27 Jan 2008 08:03:27 -0700
  • Anyone Work (Now or Ever) For A Design-Build Firm? How'd You Handle Specs? Wed, 30 Jan 2008 09:34:10 -0700
  • Re: Time History Scaling Wed, 30 Jan 2008 09:49:31 -0700
  • CONCRETE: Hot Base Plate Bearing on Concrete Wed, 30 Jan 2008 13:15:34 -0700
  • Re: Bridges Thu, 31 Jan 2008 02:30:32 -0700
  • Re: Bridges Sat, 2 Feb 2008 07:02:23 -0700
  • Re: construction tolerances Wed, 6 Feb 2008 04:12:12 -0700
  • Re: CONCRETE: Hot Base Plate Bearing on Concrete Wed, 6 Feb 2008 08:27:18 -0700
  • Re: Bending Stress for Southern Pine #2, NDS Example 5 Sat, 9 Feb 2008 19:57:57 -0700
  • Re: PLEASE READ NOW - Real virus Wed, 13 Feb 2008 12:48:49 -0700
  • Re: PLEASE READ NOW - Real virus Thu, 14 Feb 2008 05:25:20 -0700
  • Re: ASCE 7-05 Errata - Caution: content contains whining Mon, 18 Feb 2008 19:00:59 -0700
  • QUERY: Structural Clamps for Concrete Piles? Tue, 11 Mar 2008 09:46:28 -0600
  • Re: QUERY: Structural Clamps for Concrete Piles? Tue, 11 Mar 2008 10:06:16 -0600
  • Re: harold on retainer Tue, 11 Mar 2008 16:07:02 -0600
  • Re: off-topic-was- Wood LEED Sat, 15 Mar 2008 18:48:02 -0600
  • Overcoming Friction Mon, 17 Mar 2008 11:56:19 -0600
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 20:42:33 -0600
  • Re: ASCE being attacked Wed, 26 Mar 2008 07:30:29 -0600
  • Re: ASCE being attacked Wed, 26 Mar 2008 18:51:44 -0600
  • House Leveling Sun, 30 Mar 2008 08:34:14 -0600
  • Re: What's happening? Sun, 30 Mar 2008 08:38:09 -0600

• Bob Freeman
  • Wood design program for lateral Wed, 9 Jan 2008 12:06:20 -0700
  • CA special Surveying exam Wed, 30 Jan 2008 10:38:34 -0700
  • Steel shop drawings Fri, 1 Feb 2008 09:44:09 -0700
  • re-roof 1950's building Fri, 1 Feb 2008 13:59:55 -0700
  • light gage steel framing Thu, 7 Feb 2008 15:13:42 -0700
  • J-bolts or headed studs Thu, 21 Feb 2008 15:40:58 -0700
  • anchor bolt testing Tue, 4 Mar 2008 11:22:02 -0700
  • off-topic-was- Wood LEED Sat, 15 Mar 2008 16:31:52 -0600
  • 3-hour roof-ceiling assembly Wed, 19 Mar 2008 08:42:53 -0600
  • soil improvements Tue, 25 Mar 2008 12:10:24 -0600
  • RE: subgrade modulus Tue, 25 Mar 2008 15:48:48 -0600

• Bob Immel
  • RE: A few useful resources Wed, 16 Jan 2008 07:49:37 -0700

• bpce
  • Re: Enercalc 6.0 Wed, 16 Jan 2008 17:33:57 -0700

• Brian Gerving
  • RE: Soils Reports under CBC 1802.2 Fri, 15 Feb 2008 09:19:52 -0700
  • RE: Soils Reports under CBC 1802.2 Fri, 15 Feb 2008 15:01:48 -0700

• Brian Harris
  • Re: Nonlinear Pushover Analysis Fri, 18 Jan 2008 11:17:00 -0700
  • Re: QUERY: Structural Clamps for Concrete Piles? Tue, 11 Mar 2008 09:56:29 -0600

• Brian S Bossley
  • RE: AISC eLearning Mon, 10 Mar 2008 08:52:49 -0600

• bruckmandesign
  • Re: strange bldg dept request Thu, 17 Jan 2008 08:19:57 -0700
  • More wierd Bldg Dept. requests Fri, 1 Feb 2008 09:25:45 -0700

• canitzcf
  • Re: Handrail Loads vs Short Term Fri, 4 Jan 2008 19:01:17 -0700
  • Re: Glass guardrail support Mon, 7 Jan 2008 12:17:58 -0700
  • Re: NDS 2005 Fe Sat, 2 Feb 2008 22:05:21 -0700

• cap'n ron
  • Re: Steel-Detail: What's happening? Sat, 29 Mar 2008 05:46:55 -0600
  • Re: Steel-Detail: What's happening? Sat, 29 Mar 2008 06:21:24 -0600

• Casey K. Hemmatyar
  • RE: Glass guardrail support [IBC 2006/CBC 2007; Chapter 24]] Sat, 5 Jan 2008 17:40:20 -0700

• Chance, Acie
  • RE: ASCE being attacked Wed, 26 Mar 2008 17:23:48 -0600

• Charles Kane
  • CA Special Surveying Exam Suggested References Wed, 30 Jan 2008 09:15:47 -0700
  • Re: residential bridge design loads Thu, 6 Mar 2008 10:02:55 -0700

• Chris Slater
  • Lighter Loads in IBC vs. UBC Wed, 9 Jan 2008 13:30:39 -0700
  • A few useful resources Tue, 15 Jan 2008 21:00:07 -0700
  • Re: A few useful resources Wed, 16 Jan 2008 07:56:30 -0700
  • R Values for Kneebraced Posts and Steel Columns Thu, 17 Jan 2008 11:58:12 -0700
  • Aspect Ratio of Light Framed Shearwalls Fri, 25 Jan 2008 14:06:01 -0700
  • Re: ASCE 7-05 Wind Forces Sun, 27 Jan 2008 17:58:01 -0700
  • Re: ASCE 7-05 Wind Loads (10psf min.) Mon, 4 Feb 2008 11:42:37 -0700
  • Re: Enercalc 6 Tue, 5 Feb 2008 11:51:32 -0700
  • Re: Moving Walkway Seismic Restraint Tue, 12 Feb 2008 18:14:46 -0700
  • Re: Viewing the List with MIME Thu, 14 Feb 2008 10:42:45 -0700
  • Re: IBC 2007 Wind calcs. Thu, 14 Feb 2008 16:48:00 -0700
  • Re: IBC 2007 Wind calcs. Thu, 14 Feb 2008 17:40:49 -0700
  • Re: Soils Reports under CBC 1802.2 Fri, 15 Feb 2008 12:49:06 -0700
  • Re: Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 10:32:23 -0700
  • Re: Strawbale ( use to be RE: Flagstaff, AZ) Mon, 25 Feb 2008 15:28:40 -0700
  • Wind Load Utility Fri, 21 Mar 2008 12:03:10 -0600
  • Re: ASCE 7-05 wind program Tue, 25 Mar 2008 16:43:00 -0600
  • Re: Archiving Trade Magazines Fri, 28 Mar 2008 09:59:16 -0600

• Christopher Banbury
  • drilling, driving near existing residence Thu, 24 Jan 2008 07:40:11 -0700
  • RE: drilling, driving near existing residence Thu, 24 Jan 2008 09:08:34 -0700
  • Angry Employee Deletes All of Company's Data Thu, 24 Jan 2008 11:13:23 -0700
  • RE: Yet another Wind question Thu, 7 Feb 2008 07:07:53 -0700
  • RE: Yet another Wind question Fri, 8 Feb 2008 09:26:25 -0700
  • RE: Shop Drawings & ADR Mon, 11 Feb 2008 14:03:32 -0700
  • RE: Shop Drawings Mon, 11 Feb 2008 14:07:18 -0700
  • spacing limits for concrete beam shear reinforcement Mon, 11 Feb 2008 15:59:27 -0700
  • RE: PEMB engineers Tue, 12 Feb 2008 08:28:56 -0700
  • RE: Is a garage partially open, open or closed? Tue, 12 Feb 2008 08:38:33 -0700
  • RE: spacing limits for concrete beam shear reinforcement Tue, 12 Feb 2008 14:01:49 -0700
  • RE: fibermesh rates Wed, 13 Feb 2008 10:28:30 -0700
  • ASCE 7 flood impact load inflation Wed, 13 Feb 2008 10:34:36 -0700
  • RE: Is a garage partially open, open or closed? Mon, 18 Feb 2008 07:48:34 -0700
  • RE: Earthquake Thu, 21 Feb 2008 08:38:34 -0700
  • RE: Enforcement Question Thu, 6 Mar 2008 15:43:37 -0700
  • RE: 1979 SBC Tue, 18 Mar 2008 10:07:02 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 20:37:43 -0600
  • Bent Gusset Plates on MN I-35W Bridge Tue, 25 Mar 2008 08:26:57 -0600
  • Exposure Categories: ASCE7, IBC Fri, 28 Mar 2008 12:25:34 -0600

• Christopher Wright
  • Re: steel studs on columns? Thu, 24 Jan 2008 12:14:51 -0700
  • Re: A Welding question Fri, 25 Jan 2008 10:09:33 -0700
  • Re: Stainless Steel Washers... Tue, 29 Jan 2008 19:24:40 -0700
  • Re: Time History Scaling Wed, 30 Jan 2008 11:33:14 -0700
  • Re: Crane rail weld/assembly papers Fri, 1 Feb 2008 11:34:59 -0700
  • Re: Enforcement Question Fri, 7 Mar 2008 11:04:36 -0700
  • Re: Wood LEED Sat, 15 Mar 2008 15:12:11 -0600
  • Re: off-topic-was- Wood LEED Sat, 15 Mar 2008 21:29:14 -0600
  • Re: Pipe Wall Strength Mon, 17 Mar 2008 14:37:09 -0600
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 10:58:52 -0600
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 11:37:39 -0600
  • Re: Stainless Steel Wed, 19 Mar 2008 09:16:29 -0600
  • Re: Hand-held Calculator Recommended Wed, 19 Mar 2008 12:54:36 -0600
  • Re: Hand-held Calculator Recommended Wed, 19 Mar 2008 14:37:20 -0600
  • Re: review of another SE's design... Fri, 21 Mar 2008 16:18:14 -0600
  • Re: Bent Gusset Plates on MN I-35W Bridge Tue, 25 Mar 2008 10:48:40 -0600
  • Re: ASCE being attacked Tue, 25 Mar 2008 21:15:47 -0600
  • Re: ASCE being attacked Wed, 26 Mar 2008 09:27:13 -0600
  • Re: Archiving Trade Magazines Fri, 28 Mar 2008 09:52:45 -0600
  • Re: Archiving Trade Magazines Fri, 28 Mar 2008 11:24:09 -0600

• Chuck Utzman
  • Re: what's wrong? Tue, 15 Jan 2008 11:09:42 -0700
  • Re: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 16 Jan 2008 15:01:44 -0700
  • Re: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 16 Jan 2008 15:47:03 -0700
  • Re: Enercalc 6.0 Wed, 16 Jan 2008 17:59:43 -0700
  • enercalc V6 Thu, 17 Jan 2008 16:29:02 -0700
  • Re: enercalc V6 Thu, 17 Jan 2008 17:11:27 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate & bad EN Wed, 23 Jan 2008 14:18:53 -0700
  • Re: Retaining Wall Problem Thu, 24 Jan 2008 11:22:14 -0700
  • Re: Use 8d nails or 10d nails for Structural Panel Shear Walls Sun, 3 Feb 2008 20:36:16 -0700
  • Re: Soils Reports (continued) Tue, 5 Feb 2008 18:17:37 -0700
  • Re: Soils Reports (continued) Wed, 6 Feb 2008 10:56:05 -0700
  • Re: WARNING against using Staples in shear walls/diaphragms Wed, 6 Feb 2008 15:46:50 -0700
  • Re: Soils Reports under CBC 1802.2 Fri, 15 Feb 2008 13:23:09 -0700
  • Re: Soils Reports under CBC 1802.2 Sat, 16 Feb 2008 16:26:32 -0700
  • residential bridge design loads Tue, 4 Mar 2008 14:03:00 -0700

• Cindy Chabot
  • Re: Shamefully Off-Topic: Carbon Christmas Wed, 20 Feb 2008 12:21:23 -0700

• coengineer
  • Re: Source for long drill bits in S.F. Bay Area ? Thu, 24 Jan 2008 19:50:33 -0700

• Collier, Randy
  • Re: 26H8 joists Wed, 19 Mar 2008 17:56:05 -0600
  • Re: 26H8 joists Wed, 19 Mar 2008 18:00:57 -0600

• Conrad Harrison
  • RE: about load duration factor Mon, 14 Jan 2008 23:37:11 -0700
  • RE: 3-D modeling Tue, 15 Jan 2008 21:13:13 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 23:30:27 -0700
  • RE: Timber design software Wed, 16 Jan 2008 22:36:06 -0700
  • RE: RAM Structural System Thu, 24 Jan 2008 17:17:56 -0700
  • RE: DELETE THIS EMAIL TO YOUR MAILING LIST Mon, 28 Jan 2008 20:27:35 -0700
  • RE: Database For Controlling Engineering Drawings Tue, 5 Feb 2008 17:44:25 -0700
  • RE: Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 17:27:11 -0700
  • RE: Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 23:50:57 -0700
  • RE: Topographic Effects Thu, 28 Feb 2008 21:39:12 -0700
  • RE: AISC 341-05 Section 7.1 bolt shear strength a ductile limit state? Mon, 3 Mar 2008 20:28:29 -0700
  • RE: 3x studs in (E) stud wall (Remodel) Wed, 5 Mar 2008 22:59:04 -0700
  • RE: Post-its with scales printed on them? Thu, 6 Mar 2008 20:39:32 -0700
  • RE: Email being blocked? maybe Thu, 13 Mar 2008 00:31:56 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 20:22:40 -0600
  • RE: Stainless Steel - answering my own question Tue, 18 Mar 2008 22:45:50 -0600
  • RE: Stainless Steel Wed, 19 Mar 2008 18:42:35 -0600
  • RE: Structural Observation Contract Clause Wed, 26 Mar 2008 22:42:02 -0600

• Cummings, Thomas J.
  • RE: AASHTO Plate Girders Tue, 5 Feb 2008 10:49:19 -0700
  • RE: construction tolerances Tue, 5 Feb 2008 11:08:59 -0700
  • RE: Book/reference on tower foundations Wed, 26 Mar 2008 08:38:58 -0600

• DA ENGINEERING
  • resisting moment Fri, 11 Jan 2008 13:43:01 -0700
  • approved epoxy anchor Mon, 24 Mar 2008 11:40:16 -0600

• Daniel Popp
  • Re: CMU Infills Mon, 28 Jan 2008 17:03:28 -0700
  • Moving Walkway Seismic Restraint Mon, 11 Feb 2008 15:36:35 -0700
  • Re: Moving Walkway Seismic Restraint Tue, 12 Feb 2008 10:56:58 -0700
  • Re: Moving Walkway Seismic Restraint Tue, 12 Feb 2008 17:34:35 -0700
  • Re: Earthquake Thu, 21 Feb 2008 11:33:38 -0700

• Daryl Richardson
  • Re: wood floor system for a Pool table Thu, 3 Jan 2008 14:02:52 -0700
  • Re: Frost Line Mon, 7 Jan 2008 16:09:53 -0700
  • Re: 3-D modeling Wed, 16 Jan 2008 12:38:57 -0700
  • Re: Splicing of steel beam. Fri, 18 Jan 2008 12:06:50 -0700
  • Re: Rebar Weight Mon, 21 Jan 2008 10:45:01 -0700
  • Re: Rebar Weight Mon, 21 Jan 2008 16:42:48 -0700
  • Re: Failure Modes for Split Ring Connections in Heavy Timber Trusses Tue, 22 Jan 2008 11:01:21 -0700
  • Re: ASCE 7-08 Wed, 23 Jan 2008 08:20:22 -0700
  • Re: Angry Employee Deletes All of Company's Data Thu, 24 Jan 2008 17:51:57 -0700
  • Re: Soils Reports (again) Tue, 5 Feb 2008 12:48:39 -0700
  • Re: Moving Walkway Seismic Restraint Tue, 12 Feb 2008 12:14:06 -0700
  • Re: Enforcement Question Fri, 7 Mar 2008 10:26:18 -0700
  • Re: Enforcement Question Fri, 7 Mar 2008 11:18:38 -0700
  • Re: Enforcement Question Sat, 8 Mar 2008 11:41:05 -0700
  • Re: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 11:28:00 -0600
  • Re: Structural Concrete subject to sub zero temp. conditions Sun, 16 Mar 2008 13:36:53 -0600
  • Re: Emergency Opening from a concrete tunnel Mon, 17 Mar 2008 10:52:39 -0600
  • Re: review of another SE's design... Fri, 21 Mar 2008 20:06:42 -0600
  • Re: Soil improvement methods Tue, 25 Mar 2008 13:32:06 -0600
  • Re: ASCE being attacked Thu, 27 Mar 2008 11:20:36 -0600
  • Re: Archiving Trade Magazines Fri, 28 Mar 2008 16:50:47 -0600

• Dave Adams
  • RE: Handrail Loads vs Short Term Fri, 4 Jan 2008 11:48:25 -0700
  • RE: Out of Line Building Official? Tue, 8 Jan 2008 16:04:13 -0700
  • More "plan check" stuff ... Tue, 8 Jan 2008 16:55:46 -0700
  • RE: More "plan check" stuff ... Wed, 9 Jan 2008 07:36:08 -0700
  • RE: More "plan check" stuff ... Wed, 9 Jan 2008 10:12:08 -0700
  • RE: More "plan check" stuff ... Wed, 9 Jan 2008 10:23:38 -0700
  • RE: More "plan check" stuff ... Wed, 9 Jan 2008 11:44:35 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 08:32:24 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 09:29:12 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 09:39:07 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 11:23:25 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 11:59:39 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 12:30:58 -0700
  • RE: what's wrong - Soil Investigation Requirements Wed, 16 Jan 2008 12:07:10 -0700
  • RE: Anchors Wed, 16 Jan 2008 14:26:25 -0700
  • RE: Anchors Wed, 16 Jan 2008 15:53:23 -0700
  • SDC C or D ... ? Mon, 4 Feb 2008 18:10:09 -0700
  • Soils Reports (again) Tue, 5 Feb 2008 11:03:11 -0700
  • Soils Reports (continued) Tue, 5 Feb 2008 11:36:57 -0700
  • RE: Soils Reports (continued) Wed, 6 Feb 2008 09:15:35 -0700
  • AISC 341 - NonBuilding Mon, 11 Feb 2008 11:31:48 -0700
  • RE: AISC 341 - NonBuilding Mon, 11 Feb 2008 12:37:20 -0700
  • RE: AISC 341 - NonBuilding (FOLLOW UP) Mon, 11 Feb 2008 12:43:14 -0700
  • Drilled-in anchors for ungrouted masonry? Thu, 14 Feb 2008 09:03:09 -0700
  • RE: Drilled-in anchors for ungrouted masonry? Thu, 14 Feb 2008 11:12:00 -0700
  • RE: Drilled-in anchors for ungrouted masonry? Thu, 14 Feb 2008 17:11:35 -0700
  • RE: Drilled-in anchors for ungrouted masonry? Fri, 15 Feb 2008 08:46:32 -0700
  • RE: Strawbale methods Tue, 26 Feb 2008 10:52:12 -0700
  • RE: Strawbale methods Tue, 26 Feb 2008 16:41:11 -0700
  • Torsional Wind Load Cases Fri, 29 Feb 2008 12:53:22 -0700
  • RE: Using Wood-Framed Conventional Construction as a Lateral Shear Resisting Method for Design Thu, 6 Mar 2008 12:45:13 -0700

• David Fisher
  • RE: More wierd Bldg Dept. requests Fri, 1 Feb 2008 09:38:48 -0700
  • RE: Shop Drawings Thu, 7 Feb 2008 14:29:22 -0700
  • RE: Fw: PLEASE READ NOW - Real virus [OT: not really about viruses] Tue, 12 Feb 2008 13:22:00 -0700
  • Tempe, AZ Wed, 27 Feb 2008 10:24:48 -0700
  • RE: Employment opportunity Fri, 7 Mar 2008 12:16:01 -0700
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 08:38:27 -0600
  • excellent article... Tue, 18 Mar 2008 09:07:26 -0600
  • RE: Place of Public Assembly Mon, 24 Mar 2008 12:40:32 -0600
  • RE: ASCE being attacked Wed, 26 Mar 2008 11:29:21 -0600

• David Francis Caballero
  • Redundancy factor and Omega rho Thu, 17 Jan 2008 05:41:54 -0700
  • Nonlinear Pushover Analysis Fri, 18 Jan 2008 04:49:36 -0700
  • Re: Nonlinear Pushover Analysis Tue, 22 Jan 2008 19:14:28 -0700
  • Time History Scaling Wed, 30 Jan 2008 06:02:25 -0700
  • FEMA, ASCE, IBC2006 Wed, 30 Jan 2008 06:03:32 -0700
  • Nonlinear property Wed, 6 Feb 2008 06:10:18 -0700
  • Force-controlled and displacement controlled Wed, 6 Feb 2008 06:11:32 -0700
  • ASD - Seismic Mon, 10 Mar 2008 07:20:39 -0600

• David Merrick
  • RE: Retaining Wall Problem Fri, 25 Jan 2008 10:19:30 -0700
  • Re: Rigid diaph. analysis with diagonal walls Thu, 13 Mar 2008 10:16:35 -0600

• David Topete
  • Re: Glass guardrail support Fri, 4 Jan 2008 16:48:37 -0700
  • Re: Lighter Loads in IBC vs. UBC Wed, 9 Jan 2008 16:22:58 -0700
  • Re: UFC 3-340-01 "Design and Analysis of Hardened Structures to Conventional Weapons Effects" Wed, 9 Jan 2008 16:35:35 -0700
  • Re: Hollow Core Plank Recommendation Fri, 11 Jan 2008 15:45:06 -0700
  • Re: Difference between SCBF OCBF Fri, 11 Jan 2008 15:52:10 -0700
  • Re: More wierd Bldg Dept. requests Fri, 1 Feb 2008 09:40:51 -0700
  • Re: Another Timber Connection Question Mon, 4 Feb 2008 10:59:57 -0700
  • Re: Another wind question Mon, 4 Feb 2008 14:23:49 -0700
  • Re: WARNING against using Staples in shear walls/diaphragms Wed, 6 Feb 2008 11:05:00 -0700
  • Re: Simpson Titen HD not approved for use in concrete Fri, 8 Feb 2008 14:28:13 -0700
  • Re: Earthquake Thu, 21 Feb 2008 12:47:08 -0700
  • Re: Earthquake Fri, 22 Feb 2008 08:57:18 -0700
  • Re: RE: ASCE 7-05 Cantilevered Columns‏ Mon, 25 Feb 2008 14:24:06 -0700
  • Re: Topographic Effects Wed, 27 Feb 2008 17:52:51 -0700
  • Re: Topographic Effects Thu, 28 Feb 2008 10:45:31 -0700
  • Re: Topographic Effects Thu, 28 Feb 2008 11:02:56 -0700
  • Re: Topographic Effects Thu, 28 Feb 2008 14:50:18 -0700
  • Re: Topographic Effects Thu, 28 Feb 2008 16:40:26 -0700
  • Re: Sign Structures Fri, 29 Feb 2008 10:16:17 -0700
  • Re: Sign Structures Fri, 29 Feb 2008 16:13:47 -0700
  • Re: Concrete exposed to seawater Fri, 29 Feb 2008 16:21:38 -0700

• Dennis Wish
  • CBC 2304.11.2.2 - 8-inch Clearance from exposed earth to wood framing members including wood sheathing. Wed, 6 Feb 2008 19:53:21 -0700
  • Is it factual that continuous (2) #4 rebar has been eliminated in the code for the foundations and slab turn-down edges? Wed, 6 Feb 2008 19:57:24 -0700
  • RE: CBC 2304.11.2.2 - 8-inch Clearance from exposed earth to wood framing members including wood sheathing. Thu, 7 Feb 2008 14:07:39 -0700
  • Minimum edge distance OR back to the treated lumber question..... Thu, 7 Feb 2008 17:32:27 -0700
  • RE: Minimum edge distance OR back to the treated lumber question..... Thu, 7 Feb 2008 19:11:53 -0700
  • RE: Annoying and Inane Building Dept Requests, IV Thu, 7 Feb 2008 19:22:47 -0700
  • RE: Minimum edge distance OR back to the treated lumber question..... Fri, 8 Feb 2008 09:44:17 -0700
  • MultiLat(tm) 2008 - Lateral design spreadsheet ; update Fri, 8 Feb 2008 09:51:04 -0700
  • RE: SEAW Wind Procedure Tue, 12 Feb 2008 00:12:24 -0700
  • Is a garage partially open, open or closed? Tue, 12 Feb 2008 00:14:25 -0700
  • OpenOffice.org Calc - Spreadsheet question Tue, 12 Feb 2008 00:30:35 -0700
  • RE: Is a garage partially open, open or closed? Sat, 23 Feb 2008 21:35:17 -0700
  • The Structuralist.Net Website is under Construction Sun, 24 Feb 2008 16:59:37 -0700
  • RE: Rigid diaph. analysis with diagonal walls Tue, 18 Mar 2008 14:50:30 -0600
  • Current SEAOSC Newsletter - President's Editorial in current issue. Wed, 19 Mar 2008 02:35:59 -0600
  • Fundamental Period Question ASCE 7-05 12.8.2 Sat, 29 Mar 2008 19:08:59 -0600
  • RE: Fundamental Period Question ASCE 7-05 12.8.2 Sun, 30 Mar 2008 15:43:25 -0600

• dfisher
  • RE: Shrinkage of flowable fill against a stone wall Tue, 5 Feb 2008 16:51:11 -0700
  • Re: review of another SE's design... Sat, 22 Mar 2008 09:18:12 -0600

• Dick_Roberts
  • RE: PLEASE READ NOW - Real virus Wed, 13 Feb 2008 13:31:05 -0700

• Dmitri Wright
  • RE: Sign Structures Mon, 3 Mar 2008 07:40:36 -0700
  • Re: Sign Structures Tue, 4 Mar 2008 14:57:59 -0700

• dmstuart1
  • Reply Test Thu, 7 Feb 2008 08:46:43 -0700

• domdean
  • pre-fabricated building Mon, 4 Feb 2008 06:06:26 -0700
  • Re: pre-fabricated building Mon, 4 Feb 2008 07:02:17 -0700
  • Shop Drawings Thu, 7 Feb 2008 14:17:22 -0700
  • Re: fibermesh rates Wed, 13 Feb 2008 08:58:58 -0700
  • Re: Structural Observation Contract Clause Thu, 27 Mar 2008 03:33:55 -0600

• Donald Bruckman
  • RE: Slabs on grade at garage and people doors Tue, 8 Jan 2008 12:30:43 -0700
  • RE: Out of Line Building Official? Tue, 8 Jan 2008 16:13:48 -0700
  • RE: More "plan check" stuff ... Wed, 9 Jan 2008 08:37:37 -0700
  • RE: More "plan check" stuff ... Wed, 9 Jan 2008 11:08:07 -0700
  • RE: [SPAM] Re: Source for long drill bits in S.F. Bay Area ? Fri, 25 Jan 2008 09:00:17 -0700
  • RE: Shop Drawings Mon, 11 Feb 2008 13:08:52 -0700
  • RE: SOG/fibers cont... Thu, 14 Feb 2008 16:02:08 -0700
  • RE: ASCE 7-05 Errata - Caution: content contains whining Mon, 18 Feb 2008 13:50:28 -0700
  • RE: Hand-held Calculator Recommended Wed, 19 Mar 2008 12:39:10 -0600
  • RE: Hand-held Calculator Recommended Wed, 19 Mar 2008 13:51:10 -0600

• Doug Mayer
  • RE: Place of Public Assembly Mon, 24 Mar 2008 11:53:31 -0600
  • RE: Live load under mechanical and solar units at roofs Fri, 28 Mar 2008 17:32:11 -0600

• Douglas Boyd
  • RE: Test Thu, 7 Feb 2008 07:01:07 -0700
  • [no subject] Fri, 7 Mar 2008 13:40:36 -0700
  • [no subject] Fri, 21 Mar 2008 09:32:13 -0600
  • RE: ASCE being attacked Wed, 26 Mar 2008 12:47:53 -0600

• Drew Morris
  • Re: Anchors Thu, 17 Jan 2008 13:30:49 -0700
  • Re: Anchors Thu, 17 Jan 2008 17:00:33 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 11:47:01 -0700
  • Re: SCBF Wed, 23 Jan 2008 13:19:15 -0700
  • Re: Gross overturning Thu, 31 Jan 2008 11:49:06 -0700
  • Re: Re-roof on 1950's building Fri, 1 Feb 2008 15:46:18 -0700
  • Re: Use 8d nails or 10d nails for Structural Panel Shear Walls Mon, 4 Feb 2008 11:58:31 -0700
  • Re: Canopy Mon, 4 Feb 2008 14:06:23 -0700
  • Re: SDC C or D ... ? Mon, 4 Feb 2008 19:02:07 -0700
  • Re: Shop Drawings Thu, 7 Feb 2008 14:27:58 -0700
  • Re: Shamefully Off-Topic: Carbon Christmas Wed, 20 Feb 2008 12:32:52 -0700
  • Re: Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 18:03:23 -0700
  • Re: J-bolts or headed studs Thu, 21 Feb 2008 15:48:43 -0700
  • Safety factors for attaching screws to OSB Fri, 29 Feb 2008 14:59:14 -0700
  • Re: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 12:19:47 -0600
  • Wood LEED Thu, 13 Mar 2008 13:09:52 -0600
  • Re: Hand-held Calculator Recommended Wed, 19 Mar 2008 11:33:51 -0600
  • 26H8 joists Wed, 19 Mar 2008 17:27:51 -0600
  • Re: Exposure Categories: ASCE7, IBC Fri, 28 Mar 2008 12:36:18 -0600

• ECVAl3
  • Re: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 9 Jan 2008 19:05:58 -0700
  • QsubE Mon, 28 Jan 2008 19:27:15 -0700
  • Re: Another wind question Mon, 4 Feb 2008 14:58:20 -0700
  • Re: CBC 2304.11.2.2 - 8-inch Clearance from exposed earth to wood framing mem... Thu, 7 Feb 2008 11:43:11 -0700
  • Effects Thu, 14 Feb 2008 18:49:49 -0700
  • Re: Effects Thu, 14 Feb 2008 20:11:27 -0700
  • Seismic Design Example Fri, 15 Feb 2008 16:24:30 -0700
  • Re: Another Seismic Design Example CsubD Mon, 18 Feb 2008 11:57:17 -0700
  • Re: Earthquake Thu, 21 Feb 2008 12:14:24 -0700
  • Re: Lumber mill stamp; aka how to find out what I joist is installed Mon, 25 Feb 2008 12:07:05 -0700

• Ed Najjarine, SE
  • A Welding question Fri, 25 Jan 2008 00:39:30 -0700
  • Re: Canopy Mon, 4 Feb 2008 14:22:21 -0700

• edmondo san jose
  • [no subject] Mon, 18 Feb 2008 05:54:13 -0700

• Ehrlich, Gary
  • RE: 3-D modeling - ASCE 7-05 12.7.3 needs an exception for light-frame timber Fri, 18 Jan 2008 15:06:16 -0700
  • RE: Roof Gardens Live load Thu, 24 Jan 2008 12:12:49 -0700
  • IEBC Seismic Forces Mon, 28 Jan 2008 08:15:25 -0700
  • RE: ASCE 3 Thu, 7 Feb 2008 07:20:40 -0700
  • RE: Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 20:01:44 -0700
  • RE: Alternate Wind Provision Wed, 12 Mar 2008 11:29:03 -0600
  • RE: Roof Gardens Live load Fri, 14 Mar 2008 14:44:32 -0600
  • RE: Stainless Steel - answering my own question Wed, 19 Mar 2008 07:00:04 -0600

• Erickson, Aaron A.
  • Re: Roof Gardens Live load Mon, 18 Feb 2008 13:15:05 -0700

• erik gibbs
  • load combo and retaining walls Tue, 22 Jan 2008 12:28:16 -0700
  • Re: load combo and retaining walls Tue, 22 Jan 2008 18:26:36 -0700
  • Re: Aspect Ratio of Light Framed Shearwalls Fri, 25 Jan 2008 19:02:52 -0700
  • Re: Question about Shear wall aspect ratio Wed, 6 Feb 2008 13:30:20 -0700
  • Re: Other List Servers Thu, 28 Feb 2008 20:39:39 -0700
  • 3x studs in (E) stud wall (Remodel) Wed, 5 Mar 2008 21:21:49 -0700
  • Re: Wood LEED Thu, 13 Mar 2008 20:42:50 -0600
  • Re: approved epoxy anchor Mon, 24 Mar 2008 22:27:12 -0600

• Felker, Brian P CIV NAVFAC Lant, CISE
  • Failure Modes for Split Ring Connections in Heavy Timber Trusses Tue, 22 Jan 2008 07:55:58 -0700

• Frank Glazewski
  • RE: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 12:17:29 -0600
  • RE: Conc. Bond to plain steel Wed, 12 Mar 2008 13:53:22 -0600

• Frank Woeste
  • Substantial Clarification for Design of Wood Floors Supporting Ceramic Tile Tue, 29 Jan 2008 08:05:16 -0700

• Freeman C. Tang
  • Re: ASCE 7-05 Wind Forces Sat, 26 Jan 2008 14:48:51 -0700

• g r
  • Microstation Book Tue, 8 Jan 2008 11:26:38 -0700
  • AASHTO Plate Girders Tue, 5 Feb 2008 10:35:35 -0700
  • Re: AASHTO Plate Girders Tue, 5 Feb 2008 12:22:14 -0700
  • Re: AASHTO Plate Girders Wed, 6 Feb 2008 09:32:37 -0700

• G Vishwanath
  • Re: PLEASE READ NOW - Real virus Thu, 14 Feb 2008 05:10:10 -0700
  • Re: Tekla Structures Training Centre at William Hare, Chennai, In Wed, 19 Mar 2008 06:19:31 -0600
  • RE: Hand-held Calculator Recommended Thu, 20 Mar 2008 05:38:21 -0600
  • What is 2t plastic hinge gusset plate design? Wed, 26 Mar 2008 00:23:50 -0600
  • Re: Archiving Trade Magazines Fri, 28 Mar 2008 05:34:16 -0600
  • Re: What is 2t plastic hinge gusset plate design? Fri, 28 Mar 2008 06:52:55 -0600
  • What's happening? Sat, 29 Mar 2008 01:18:53 -0600

• G.Bunkers
  • Pipe wall strength Tue, 18 Mar 2008 07:34:58 -0600

• Gaines, David
  • RE: Structural Wood Repairs Wed, 2 Jan 2008 09:59:23 -0700
  • RE: wood floor system for a Pool table Thu, 3 Jan 2008 18:32:34 -0700
  • RE: Failure Modes for Split Ring Connections in Heavy Timber Trusses Tue, 22 Jan 2008 10:45:32 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 12:08:35 -0700
  • RE: Permit, EOR & Enforcement Question Tue, 11 Mar 2008 12:09:36 -0600

• Garner, Robert
  • RE: "Those who can't do..." Mon, 7 Jan 2008 09:59:03 -0700
  • Concrete Anchors Tue, 8 Jan 2008 16:59:36 -0700
  • ASCE 7-08 Mon, 21 Jan 2008 16:57:51 -0700
  • RE: ASCE 7-08 Wed, 23 Jan 2008 08:22:17 -0700
  • RE: Gross overturning Thu, 31 Jan 2008 11:42:06 -0700
  • RE: AISC eLearning Fri, 29 Feb 2008 14:25:24 -0700
  • RE: AISC eLearning Fri, 29 Feb 2008 14:58:24 -0700
  • RE: AISC eLearning Fri, 29 Feb 2008 15:17:39 -0700
  • RE: Overhead Electrical Service Feeder Support Mon, 3 Mar 2008 10:53:57 -0700
  • RE: Rigid diaph. analysis with diagonal walls Wed, 12 Mar 2008 07:58:49 -0600
  • RE: Conc. Bond to plain steel Wed, 12 Mar 2008 13:14:54 -0600
  • RE: Overcoming Friction Mon, 17 Mar 2008 12:59:20 -0600
  • RE: Programs for cast-in-place Anchors Fri, 28 Mar 2008 07:55:02 -0600

• Gary L. Hodgson and Assoc.
  • Re: steel studs on columns? Fri, 25 Jan 2008 05:52:24 -0700
  • Re: ASCE 7-08 Fri, 25 Jan 2008 06:13:14 -0700
  • Re: Fire wall/shear wall on property line Wed, 6 Feb 2008 05:56:21 -0700
  • Re: Fire wall/shear wall on property line Thu, 7 Feb 2008 05:52:17 -0700
  • Re: AASHTO Plate Girders Thu, 7 Feb 2008 06:01:17 -0700
  • Re: Shop Drawings Fri, 8 Feb 2008 06:26:52 -0700
  • Re: CBO Wed, 13 Feb 2008 05:56:02 -0700
  • Re: CBO Wed, 13 Feb 2008 06:18:38 -0700
  • Re: fibermesh rates - Performance-Based Concrete... Thu, 14 Feb 2008 05:40:59 -0700
  • Re: SOG/fibers cont... Fri, 15 Feb 2008 05:43:03 -0700
  • Re: IBC 2007 Wind calcs. Fri, 15 Feb 2008 06:03:53 -0700
  • Re: Chain Link Fence Backstop Sat, 16 Feb 2008 06:36:22 -0700
  • Re: IBC 2007 Wind calcs. Sat, 16 Feb 2008 06:54:16 -0700
  • Re: ASCE 7-05 Errata - Caution: content contains whining Tue, 19 Feb 2008 05:44:44 -0700
  • Sign Structures Thu, 28 Feb 2008 15:04:48 -0700
  • Re: Sign Structures Fri, 29 Feb 2008 06:00:59 -0700
  • Re: Sign Structures Sat, 1 Mar 2008 07:28:22 -0700
  • Re: Sign Structures Mon, 3 Mar 2008 05:52:07 -0700
  • Re: Enforcement Question Sat, 8 Mar 2008 07:06:27 -0700
  • Re: Enforcement Question Mon, 10 Mar 2008 06:19:43 -0600
  • Re: Rigid diaph. analysis with diagonal walls Wed, 12 Mar 2008 05:56:33 -0600
  • Re: Wood LEED Tue, 18 Mar 2008 06:16:57 -0600
  • Re: Hand-held Calculator Recommended Wed, 19 Mar 2008 06:18:35 -0600

• Gary Loomis
  • RE: Concrete Strength Requirements for Residential Projects in SDC D or Higher Fri, 4 Jan 2008 10:34:56 -0700
  • RE: Glass guardrail support Fri, 4 Jan 2008 15:18:01 -0700
  • RE: retrofit existing roof Mon, 4 Feb 2008 08:34:37 -0700
  • RE: pre-fabricated building Mon, 4 Feb 2008 08:45:31 -0700
  • RE: Base Plate design Thu, 28 Feb 2008 06:47:44 -0700

• garyg
  • RE: CBC Code Question on Engineer or Architect of Record Thu, 21 Feb 2008 08:35:37 -0700
  • Re: Using Wood-Framed Conventional Construction as a Lateral Shear Resisting ... Fri, 7 Mar 2008 08:32:55 -0700

• Gautam Manandhar
  • RE: Question about Shear wall aspect ratio Wed, 6 Feb 2008 13:19:42 -0700

• Gerard Madden, SE
  • Re: wood floor system for a Pool table Thu, 3 Jan 2008 17:35:14 -0700
  • Out of Line Building Official? Tue, 8 Jan 2008 14:56:50 -0700
  • Re: Out of Line Building Official? Tue, 8 Jan 2008 16:26:54 -0700
  • Re: Out of Line Building Official? Tue, 8 Jan 2008 16:47:27 -0700
  • Re: Out of Line Building Official? Tue, 8 Jan 2008 17:04:02 -0700
  • Re: More "plan check" stuff ... Wed, 9 Jan 2008 11:57:00 -0700
  • Re: More "plan check" stuff ... Wed, 9 Jan 2008 12:24:16 -0700
  • Re: Out of Line Building Official? Thu, 10 Jan 2008 00:36:40 -0700
  • Re: Dual - System ( frame+wall) Fri, 11 Jan 2008 10:14:23 -0700
  • Re: what's wrong - Soil Investigation Requirements -- ad nausium Wed, 16 Jan 2008 13:37:45 -0700
  • Re: 3-D modeling - ASCE 7-05 12.7.3 needs an exception for light-frame timber Fri, 18 Jan 2008 16:37:22 -0700
  • Re: load combo and retaining walls Tue, 22 Jan 2008 18:55:53 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 12:55:26 -0700
  • Re: SCBF Wed, 23 Jan 2008 12:56:48 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate & bad EN Wed, 23 Jan 2008 23:56:11 -0700
  • Re: Roof Gardens Live load Thu, 24 Jan 2008 13:29:26 -0700
  • Re: Retaining Wall Problem Fri, 25 Jan 2008 10:47:06 -0700
  • Re: IEBC Seismic Forces Mon, 28 Jan 2008 10:24:28 -0700
  • Re: CMU Infills Mon, 28 Jan 2008 16:01:51 -0700
  • Re: CMU Infills Mon, 28 Jan 2008 17:16:34 -0700
  • Re: CA Special Surveying Exam Suggested References Wed, 30 Jan 2008 10:33:10 -0700
  • Re: Bridges Wed, 30 Jan 2008 23:34:49 -0700
  • Re: Bridges Thu, 31 Jan 2008 12:17:15 -0700
  • Re: Re-roof on 1950's building Fri, 1 Feb 2008 12:51:00 -0700
  • Re: Re-roof on 1950's building Fri, 1 Feb 2008 13:04:59 -0700
  • Re: Use 8d nails or 10d nails for Structural Panel Shear Walls Sun, 3 Feb 2008 14:09:52 -0700
  • CBC 2007 Summary for Wood Thu, 7 Feb 2008 13:11:33 -0700
  • Re: Shop Drawings Thu, 7 Feb 2008 14:54:52 -0700
  • Re: Minimum edge distance OR back to the treated lumber question..... Thu, 7 Feb 2008 18:29:43 -0700
  • Re: Minimum edge distance OR back to the treated lumber question..... Fri, 8 Feb 2008 01:26:09 -0700
  • Re: Minimum edge distance OR back to the treated lumber question..... Fri, 8 Feb 2008 01:32:10 -0700
  • Re: Moving Walkway Seismic Restraint Tue, 12 Feb 2008 11:26:55 -0700
  • Re: FW: Effects Thu, 14 Feb 2008 21:25:58 -0700
  • Re: Roof Gardens Live load Sun, 17 Feb 2008 17:40:16 -0700
  • Re: Roof Gardens Live load Sun, 17 Feb 2008 17:43:18 -0700
  • Re: Rigid diaph. analysis with diagonal walls Thu, 13 Mar 2008 20:55:11 -0600
  • Re: Wood LEED Sat, 15 Mar 2008 12:22:25 -0600
  • Re: CBC Sect 1633A Exemption Tue, 18 Mar 2008 10:40:03 -0600
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 10:43:16 -0600
  • 1 Story Rod Braces in CBC2007 Tue, 18 Mar 2008 11:34:55 -0600
  • Re: Seismic on restrained retaining walls Thu, 20 Mar 2008 10:33:51 -0600
  • Re: approved epoxy anchor Mon, 24 Mar 2008 11:48:01 -0600
  • Place of Public Assembly Mon, 24 Mar 2008 11:49:00 -0600
  • Re: Place of Public Assembly Mon, 24 Mar 2008 15:17:34 -0600
  • Re: Place of Public Assembly Mon, 24 Mar 2008 15:29:57 -0600
  • Re: Place of Public Assembly Mon, 24 Mar 2008 18:08:37 -0600
  • Re: Cantilever Column system Tue, 25 Mar 2008 12:26:01 -0600
  • Re: What is 2t plastic hinge gusset plate design? Wed, 26 Mar 2008 11:00:02 -0600
  • Re: Programs for cast-in-place Anchors Thu, 27 Mar 2008 18:28:36 -0600
  • Re: Programs for cast-in-place Anchors Fri, 28 Mar 2008 13:02:50 -0600

• Gil Brock
  • RE: Design Load Combination(s) for Prestress Slab Tue, 15 Jan 2008 16:34:58 -0700

• Glen Pappas
  • RE: UFC 3-340-01 "Design and Analysis of Hardened Structures to Conventional Weapons Effects" Thu, 10 Jan 2008 08:11:18 -0700
  • Re: Anchors Thu, 17 Jan 2008 07:46:30 -0700

• Golding Kent T
  • re:hot weather concrete Fri, 29 Feb 2008 09:26:49 -0700

• Gould, Diane
  • Design Load Combination(s) for Prestress Slab Tue, 15 Jan 2008 11:08:03 -0700
  • RE: Design Load Combination(s) for Prestress Slab Tue, 15 Jan 2008 11:10:39 -0700

• Gray Hodge
  • Spectral response maps for areas outside the US Tue, 4 Mar 2008 11:14:05 -0700

• GUADES ERNESTO
  • Re: Nonlinear Pushover Analysis Tue, 22 Jan 2008 19:38:09 -0700
  • Re: Nonlinear Pushover Analysis Tue, 22 Jan 2008 19:46:07 -0700

• Gunnar H. Isleifsson
  • RE: Danish Wind Turbine disintegrating - Feb.27,2008 Mon, 17 Mar 2008 14:33:42 -0600
  • RE: Pipe Wall Strength Mon, 17 Mar 2008 15:22:07 -0600
  • RE: stainless steel pipe Tue, 18 Mar 2008 21:49:51 -0600

• Haan, Scott M POA
  • pre-engineered metal buildings with intermediate steel moment frames or special moment frames? Mon, 14 Jan 2008 18:18:59 -0700
  • RE: 3-D modeling Tue, 15 Jan 2008 18:41:10 -0700
  • RE: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 16 Jan 2008 15:40:19 -0700
  • RE: Enercalc 6.0 Wed, 16 Jan 2008 16:46:59 -0700
  • RE: Anchors Thu, 17 Jan 2008 12:38:45 -0700
  • RE: strange bldg dept request Thu, 17 Jan 2008 15:04:57 -0700
  • RE: Anchors - DS Anchor Thu, 17 Jan 2008 15:31:09 -0700
  • RE: enercalc V6 Thu, 17 Jan 2008 16:32:42 -0700
  • RE: R Values for Kneebraced Posts and Steel Columns Thu, 17 Jan 2008 16:47:42 -0700
  • RE: enercalc V6 Thu, 17 Jan 2008 17:19:38 -0700
  • RE: 3-D modeling - ASCE 7-05 12.7.3 needs an exception for light-frame timber Thu, 17 Jan 2008 19:51:43 -0700
  • acceptable bend radius for a cable or tendon? Thu, 24 Jan 2008 19:09:24 -0700
  • RE: Soils Reports (again) Tue, 5 Feb 2008 12:33:47 -0700
  • RE: WARNING against using Staples in shear walls/diaphragms Wed, 6 Feb 2008 13:43:44 -0700
  • RE: ASCE 7-05 Cantilevered Columns Wed, 13 Feb 2008 14:40:52 -0700
  • RE: ASCE 7-05 Cantilevered Columns Wed, 13 Feb 2008 16:30:15 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 15:59:36 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 17:03:58 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 18:01:12 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 19:11:52 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 19:32:27 -0700
  • RE: Effects Thu, 14 Feb 2008 19:45:46 -0700
  • FW: Effects Thu, 14 Feb 2008 20:27:26 -0700
  • RE: Chapter 17- IBC Wed, 20 Feb 2008 18:57:15 -0700
  • butchering steel stud webs - guideline? Thu, 28 Feb 2008 14:23:20 -0700
  • RE: butchering steel stud webs - guideline? Mon, 3 Mar 2008 18:49:30 -0700
  • AISC 341-05 Section 7.1 bolt shear strength a ductile limit state? Mon, 3 Mar 2008 19:32:38 -0700
  • RE: Enforcement Question Fri, 7 Mar 2008 10:39:38 -0700
  • RE: Enforcement Question Fri, 7 Mar 2008 12:35:36 -0700
  • RE: Enforcement Question Fri, 7 Mar 2008 18:44:28 -0700
  • RE: Enforcement Question Mon, 10 Mar 2008 13:04:57 -0600
  • RE: Enforcement Question Mon, 10 Mar 2008 13:07:02 -0600
  • RE: Enforcement Question Mon, 10 Mar 2008 19:13:39 -0600
  • AISC 341-05 flexural strength of braced frame braces Wed, 12 Mar 2008 17:26:55 -0600
  • RE: AISC 341-05 flexural strength of braced frame braces - I meant bases Wed, 12 Mar 2008 17:59:46 -0600
  • AISC 341-05 section 8.5 exception, 2006 IBC 1908.1.16 Wed, 12 Mar 2008 18:00:43 -0600
  • RE: subgrade modulus Tue, 25 Mar 2008 20:19:01 -0600

• Harold Sprague
  • RE: MAC-CORE Type-1 Deck Thu, 3 Jan 2008 10:00:03 -0700
  • RE: Debonding of precast plank topping Thu, 3 Jan 2008 10:26:25 -0700
  • RE: MAC-CORE Type-1 Deck Thu, 3 Jan 2008 10:55:14 -0700
  • RE: Occupancy Category History Fri, 4 Jan 2008 09:37:07 -0700
  • RE: Handrail Loads vs Short Term Fri, 4 Jan 2008 13:13:37 -0700
  • Steel deck manufacturer in Turkey Fri, 4 Jan 2008 14:26:15 -0700
  • RE: Glass guardrail support Fri, 4 Jan 2008 15:40:25 -0700
  • RE: Handrail Loads vs Short Term Mon, 7 Jan 2008 08:11:40 -0700
  • RE: Handrail Loads vs Short Term Mon, 7 Jan 2008 08:12:36 -0700
  • RE: UFC 3-340-01 "Design and Analysis of Hardened Structures to Conventional Weapons Effects" Thu, 10 Jan 2008 10:31:31 -0700
  • RE: Slabs on grade at garage and people doors Tue, 15 Jan 2008 08:45:30 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 09:00:07 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 09:31:40 -0700
  • RE: R Values for Kneebraced Posts and Steel Columns Thu, 17 Jan 2008 13:15:33 -0700
  • RE: Nonlinear Pushover Analysis Fri, 18 Jan 2008 10:44:36 -0700
  • RE: Decoupling of anchor bolts Sat, 19 Jan 2008 19:53:37 -0700
  • RE: Decoupling of anchor bolts Sun, 20 Jan 2008 18:55:37 -0700
  • RE: Failure Modes for Split Ring Connections in Heavy Timber Trusses Tue, 22 Jan 2008 12:17:49 -0700
  • RE: steel studs on columns? Thu, 24 Jan 2008 08:11:36 -0700
  • RE: drilling, driving near existing residence Thu, 24 Jan 2008 08:17:51 -0700
  • RE: Retaining Wall Problem Thu, 24 Jan 2008 08:23:20 -0700
  • RE: Decoupling of anchor bolts Tue, 29 Jan 2008 08:40:46 -0700
  • RE: Crane rail weld/assembly papers Fri, 1 Feb 2008 08:49:59 -0700
  • RE: ASTM Fri, 1 Feb 2008 15:41:00 -0700
  • RE: Welding of studs through deck to steel beams Fri, 1 Feb 2008 15:46:50 -0700
  • RE: pre-fabricated building Mon, 4 Feb 2008 10:56:57 -0700
  • RE: Shrinkage of flowable fill against a stone wall Wed, 6 Feb 2008 14:09:27 -0700
  • RE: Shrinkage of flowable fill against a stone wall Thu, 7 Feb 2008 14:38:17 -0700
  • RE: basic lateral force question Fri, 8 Feb 2008 08:20:43 -0700
  • RE: fibermesh rates - Performance-Based Concrete... Wed, 13 Feb 2008 12:46:24 -0700
  • RE: fibermesh rates - Performance-Based Concrete... Wed, 13 Feb 2008 19:19:21 -0700
  • RE: SOG/fibers cont... Thu, 14 Feb 2008 15:01:26 -0700
  • RE: SOG/fibers cont... Fri, 15 Feb 2008 17:17:31 -0700
  • RE: Roof Gardens Live load Sun, 17 Feb 2008 17:25:08 -0700
  • RE: Chapter 17- IBC Wed, 20 Feb 2008 17:14:40 -0700
  • RE: Looking for Foundation Book Mon, 25 Feb 2008 08:55:59 -0700
  • RE: Hot Weather Concreting Thu, 28 Feb 2008 08:10:46 -0700
  • RE: butchering steel stud webs - guideline? Thu, 28 Feb 2008 15:16:00 -0700
  • RE: Sign Structures Thu, 28 Feb 2008 15:24:45 -0700
  • RE: Pipe Rack Retrofit Thu, 28 Feb 2008 15:38:16 -0700
  • RE: Sign Structures Fri, 29 Feb 2008 15:51:48 -0700
  • RE: Sign Structures Mon, 3 Mar 2008 08:49:47 -0700
  • RE: Sign Structures Mon, 3 Mar 2008 09:05:07 -0700
  • RE: Overhead Electrical Service Feeder Support Mon, 3 Mar 2008 10:49:10 -0700
  • RE: Concrete exposed to seawater Mon, 3 Mar 2008 13:14:47 -0700
  • RE: Concrete exposed to seawater Mon, 3 Mar 2008 22:37:44 -0700
  • RE: Testing In-Place Anchor Bolts Tue, 4 Mar 2008 11:14:17 -0700
  • RE: Spectral response maps for areas outside the US Tue, 4 Mar 2008 11:21:46 -0700
  • RE: Las Vegas Sign Structure Tue, 4 Mar 2008 16:30:36 -0700
  • RE: Las Vegas Sign Structure Tue, 4 Mar 2008 21:25:27 -0700
  • RE: ASD - Seismic Mon, 10 Mar 2008 07:55:23 -0600
  • RE: ASD - Seismic - Consulting Fee Structure Mon, 10 Mar 2008 13:05:56 -0600
  • RE: ASCE 7-05 Cantilevered Column System vs. Inverted Pendulum-Type Structures Tue, 11 Mar 2008 15:06:57 -0600
  • RE: Concrete Digestion Tanks Wed, 12 Mar 2008 09:01:38 -0600
  • RE: Conc. Bond to plain steel Wed, 12 Mar 2008 14:10:12 -0600
  • RE: Masonry Question Fri, 14 Mar 2008 16:09:11 -0600
  • RE: Seismic load on retaining wall Fri, 21 Mar 2008 09:42:44 -0600
  • RE: Structural Concrete subject to sub zero temp. conditions Fri, 21 Mar 2008 10:07:53 -0600
  • RE: Stainless Steel - answering my own question Fri, 21 Mar 2008 10:46:04 -0600
  • RE: review of another SE's design... Fri, 21 Mar 2008 16:03:36 -0600
  • RE: Soil improvement methods Tue, 25 Mar 2008 14:24:26 -0600
  • RE: Bent Gusset Plates on MN I-35W Bridge Tue, 25 Mar 2008 14:45:54 -0600
  • RE: Tremie Concrete Tue, 25 Mar 2008 15:02:16 -0600
  • RE: Book/reference on tower foundations Wed, 26 Mar 2008 10:11:52 -0600
  • RE: subgrade modulus Wed, 26 Mar 2008 10:34:16 -0600
  • RE: ASCE being attacked Wed, 26 Mar 2008 11:24:36 -0600
  • RE: Book/reference on tower foundations Wed, 26 Mar 2008 13:18:40 -0600
  • RE: ASCE being attacked Thu, 27 Mar 2008 11:35:20 -0600
  • RE: subgrade modulus Thu, 27 Mar 2008 11:51:35 -0600

• HBAP
  • Re: load combo and retaining walls Tue, 22 Jan 2008 14:43:31 -0700
  • Re: load combo and retaining walls Tue, 22 Jan 2008 19:15:37 -0700

• Hewitt, Chris
  • AISC eLearning Fri, 29 Feb 2008 13:27:49 -0700

• Hugh Brooks
  • Seismic on restrained retaining walls Thu, 20 Mar 2008 10:13:31 -0600

• I.KATZ
  • Re: precast flat slabs Mon, 25 Feb 2008 05:22:55 -0700

• IRV FRUCHTMAN
  • Retaining Wall Problem Thu, 24 Jan 2008 08:14:51 -0700
  • Retaining Wall Problem Mon, 28 Jan 2008 09:58:15 -0700
  • Re: CBC 2304.11.2.2 - 8-inch Clearance from exposed earth to wood framing members including wood sheathing. Thu, 7 Feb 2008 08:36:39 -0700
  • RE: Is a garage partially open, open or closed? Mon, 25 Feb 2008 07:12:54 -0700

• j.n.sigalas
  • construction tolerances Tue, 5 Feb 2008 10:56:50 -0700
  • Re: construction tolerances Wed, 6 Feb 2008 01:21:11 -0700
  • avoiding expansion joints Thu, 28 Feb 2008 10:10:20 -0700

• Jake Watson
  • MAC-CORE Type-1 Deck Wed, 2 Jan 2008 11:04:14 -0700
  • Re: MAC-CORE Type-1 Deck Thu, 3 Jan 2008 10:27:25 -0700
  • Occupancy Category History Fri, 4 Jan 2008 08:41:21 -0700
  • Re: Occupancy Category History Fri, 4 Jan 2008 09:59:11 -0700
  • Re: Seismic Drift Loading Mon, 7 Jan 2008 19:45:45 -0700

• James Getaz
  • Re: precast flat slabs Sat, 23 Feb 2008 09:01:05 -0700

• James Hannah
  • Re: Looking for Foundation Book Wed, 27 Feb 2008 21:43:37 -0700

• Jared Keyser
  • RE: Lighter Loads in IBC vs. UBC Thu, 10 Jan 2008 10:18:36 -0700
  • Safety factors for attaching screws to OSB Sun, 2 Mar 2008 14:19:43 -0700
  • IBC Eq 21-3 Sat, 22 Mar 2008 11:49:43 -0600
  • IBC Eq 21-3 Sat, 22 Mar 2008 12:11:27 -0600
  • RE: IBC 21-3 Sun, 23 Mar 2008 20:11:49 -0600

• jascopac
  • RE: Retaining Wall Problem Thu, 24 Jan 2008 13:52:55 -0700

• Jason Christensen
  • RE: wood floor system for a Pool table Thu, 3 Jan 2008 13:57:51 -0700
  • RE: Lighter Loads in IBC vs. UBC Thu, 10 Jan 2008 11:44:40 -0700
  • RE: resisting moment Fri, 11 Jan 2008 15:57:31 -0700
  • RAM Structural System Thu, 24 Jan 2008 14:30:55 -0700
  • RE: Enercalc 6.0 Mon, 28 Jan 2008 16:49:14 -0700
  • ASTM Fri, 1 Feb 2008 11:08:44 -0700
  • RE: ASTM Fri, 1 Feb 2008 14:02:29 -0700
  • RE: ASCE 7-05 Wind Loads (10psf min.) Mon, 4 Feb 2008 11:26:25 -0700
  • Another Seismic Design Example Mon, 18 Feb 2008 09:55:46 -0700
  • Earthquake Thu, 21 Feb 2008 08:09:25 -0700
  • Frozen Masonry Fri, 22 Feb 2008 13:09:30 -0700
  • re: Frozen Masonry Fri, 22 Feb 2008 14:04:48 -0700
  • RE: Masonry Question Fri, 14 Mar 2008 08:45:33 -0600
  • RE: Masonry Question Fri, 14 Mar 2008 10:27:37 -0600
  • RE: Hand-held Calculator Recommended Wed, 19 Mar 2008 13:19:47 -0600

• Jason Emoto
  • RE: Out of Line Building Official? Tue, 8 Jan 2008 16:42:19 -0700
  • RE: Fire wall/shear wall on property line Wed, 6 Feb 2008 10:58:31 -0700

• Jason Ericksen
  • Re: Crane rail weld/assembly papers Thu, 31 Jan 2008 17:10:05 -0700

• jatech
  • RE: Wood LEED Sat, 15 Mar 2008 10:06:31 -0600
  • Re: What is 2t plastic hinge gusset plate design? Wed, 26 Mar 2008 11:26:56 -0600

• jeff . giger
  • Jeff Giger/DAN/Minerals/METSO is out of the office. Thu, 17 Jan 2008 02:05:06 -0700

• Jeff Coronado
  • Re: Employment opportunity Fri, 7 Mar 2008 12:25:24 -0700

• Jeff Hedman
  • Fire wall/shear wall on property line Tue, 5 Feb 2008 12:24:09 -0700
  • Re: Fire wall/shear wall on property line Tue, 5 Feb 2008 14:31:31 -0700
  • Re: Fire wall/shear wall on property line Tue, 5 Feb 2008 15:18:49 -0700
  • Re: Fire wall/shear wall on property line Fri, 8 Feb 2008 08:42:13 -0700
  • Re: Fire wall/shear wall on property line Fri, 8 Feb 2008 08:54:27 -0700
  • Simpson Titen HD not approved for use in concrete Fri, 8 Feb 2008 12:46:52 -0700

• Jeff Smith
  • RE: wood floor system for a Pool table Thu, 3 Jan 2008 20:54:43 -0700
  • RE: Glass guardrail support Fri, 4 Jan 2008 17:48:19 -0700
  • RE: Anchors Wed, 16 Jan 2008 15:03:02 -0700
  • RE: Retaining Wall Problem Thu, 24 Jan 2008 13:43:07 -0700
  • RE: Source for long drill bits in S.F. Bay Area ? Fri, 25 Jan 2008 16:39:26 -0700

• Jeremy White
  • Concrete Digestion Tanks Tue, 11 Mar 2008 19:42:11 -0600
  • RE: Concrete Digestion Tanks Wed, 12 Mar 2008 09:33:01 -0600

• Jerry Coombs
  • Re: Concrete Strength Requirements for Residential Projects in SDC D or Higher Fri, 4 Jan 2008 10:03:11 -0700
  • Re: Out of Line Building Official? Wed, 9 Jan 2008 06:24:04 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 14:05:09 -0700
  • Re: Shop Drawings Fri, 8 Feb 2008 05:58:56 -0700
  • Re: Shop Drawings Fri, 8 Feb 2008 06:31:24 -0700
  • Re: CBO Mon, 11 Feb 2008 06:25:39 -0700
  • RE: spacing limits for concrete beam shear reinforcement Tue, 12 Feb 2008 09:50:12 -0700
  • Re: CBO Wed, 13 Feb 2008 06:07:32 -0700
  • Re: fibermesh rates Wed, 13 Feb 2008 08:29:10 -0700
  • RE: fibermesh rates - Performance-Based Concrete... Wed, 13 Feb 2008 14:27:29 -0700
  • Re: SOG/fibers cont... Thu, 14 Feb 2008 13:24:05 -0700
  • RE: SOG/fibers cont... Fri, 15 Feb 2008 06:41:10 -0700
  • Re: SOG/fibers cont... Fri, 15 Feb 2008 07:02:43 -0700
  • Re: Alternate Wind Provision Fri, 15 Feb 2008 10:43:29 -0700
  • Re: Alternate Wind Provision Fri, 15 Feb 2008 10:46:03 -0700
  • Re: Lumber mill stamp; aka how to find out what I joist is installed Mon, 25 Feb 2008 12:20:35 -0700
  • Re: butchering steel stud webs - guideline? Fri, 29 Feb 2008 04:57:07 -0700
  • Re: Other List Servers Fri, 29 Feb 2008 05:03:13 -0700
  • RE: Sign Structures Mon, 3 Mar 2008 07:46:14 -0700
  • Re: Enforcement Question Mon, 10 Mar 2008 06:34:08 -0600
  • RE: Wood LEED Mon, 17 Mar 2008 06:06:04 -0600
  • Re: Structural Concrete subject to sub zero temp. conditions Mon, 17 Mar 2008 06:17:45 -0600
  • Re: Danish Wind Turbine disintegrating - Feb.27,2008 Mon, 17 Mar 2008 06:22:01 -0600
  • Re: Tremie Concrete Tue, 25 Mar 2008 13:02:02 -0600
  • Re: Book/reference on tower foundations Wed, 26 Mar 2008 07:59:59 -0600
  • RE: ASCE being attacked Wed, 26 Mar 2008 13:38:06 -0600
  • Re: Archiving Trade Magazines Thu, 27 Mar 2008 05:28:27 -0600
  • Re: Archiving Trade Magazines Fri, 28 Mar 2008 10:36:40 -0600
  • Re: House Leveling Mon, 31 Mar 2008 04:43:35 -0600

• Jim Carey
  • RE: Hand-held Calculator Recommended Wed, 19 Mar 2008 07:55:57 -0600

• Jim Chatterley PE
  • RE: A few useful resources Wed, 16 Jan 2008 07:38:02 -0700

• Jim Getaz
  • RE: Debonding of precast plank topping Thu, 3 Jan 2008 05:44:06 -0700
  • RE: L Bolts - Was enercalc V6 Fri, 18 Jan 2008 06:14:30 -0700
  • Re: Pre-$%!#&#& metal buildings Tue, 12 Feb 2008 07:36:48 -0700
  • Re: precast flat slabs Tue, 26 Feb 2008 05:42:53 -0700
  • QUERY: Structural Clamps for Concrete Piles? Wed, 12 Mar 2008 07:20:23 -0600

• Jim Lutz
  • 3 Hour Fire Rated Ceiling Assembly Tue, 18 Mar 2008 18:00:50 -0600

• Jim Wilson
  • Slabs on grade at garage and people doors Tue, 8 Jan 2008 10:04:32 -0700
  • Re: Enercalc 6.0 Wed, 16 Jan 2008 16:25:11 -0700
  • Shrinkage of flowable fill against a stone wall Tue, 5 Feb 2008 15:11:14 -0700
  • Re: Shrinkage of flowable fill against a stone wall Tue, 5 Feb 2008 17:53:49 -0700
  • Re: Shrinkage of flowable fill against a stone wall Thu, 7 Feb 2008 10:08:29 -0700
  • venting a valley rafter? Thu, 27 Mar 2008 19:43:45 -0600

• Jimenez, Jorge A.
  • RE: Test Thu, 7 Feb 2008 05:13:14 -0700

• Jnapd
  • (no subject) Thu, 3 Jan 2008 19:00:59 -0700
  • Re: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 9 Jan 2008 17:57:37 -0700
  • Re: redundancy rho Tue, 15 Jan 2008 15:27:31 -0700
  • Re: 3-D modeling Wed, 16 Jan 2008 11:16:32 -0700
  • Re: R Values for Kneebraced Posts and Steel Columns Thu, 17 Jan 2008 13:35:22 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 13:16:16 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate & bad EN Wed, 23 Jan 2008 21:10:12 -0700
  • Re: Angry Employee Deletes All of Company's Data Thu, 24 Jan 2008 11:40:03 -0700
  • Re: ASCE 7-08 Thu, 24 Jan 2008 12:10:20 -0700
  • Re: ASCE 7-08 Thu, 24 Jan 2008 13:50:15 -0700
  • Re: Decoupling of anchor bolts Tue, 29 Jan 2008 10:28:57 -0700
  • Re: Gross overturning Thu, 31 Jan 2008 12:30:34 -0700
  • (no subject) Thu, 31 Jan 2008 12:41:30 -0700
  • Canopy Mon, 4 Feb 2008 13:43:48 -0700
  • Re: Use 8d nails or 10d nails for Structural Panel Shear Walls Mon, 4 Feb 2008 13:59:08 -0700
  • Another wind question Mon, 4 Feb 2008 14:09:31 -0700
  • Re: Another wind question Mon, 4 Feb 2008 14:47:08 -0700
  • Re: Another wind question Mon, 4 Feb 2008 15:05:03 -0700
  • Re: canopy wind loads Wed, 6 Feb 2008 19:09:46 -0700
  • (no subject) Thu, 7 Feb 2008 10:09:19 -0700
  • Re: Shop Drawings Thu, 7 Feb 2008 14:47:11 -0700
  • Re: Shop Drawings Thu, 7 Feb 2008 14:58:37 -0700
  • Re: PEMB engineers Tue, 12 Feb 2008 12:07:41 -0700
  • Re: Soils Reports under CBC 1802.2 Fri, 15 Feb 2008 12:17:03 -0700
  • Re: wind codes... Fri, 15 Feb 2008 15:30:59 -0700
  • Re: Seismic Design Example Fri, 15 Feb 2008 23:09:52 -0700
  • Re: Is a garage partially open, open or closed? Mon, 18 Feb 2008 21:53:55 -0700
  • Re: ASCE 7-?? Thu, 21 Feb 2008 10:25:53 -0700
  • Re: RE: ASCE 7-05 Cantilevered Columns‏ Mon, 25 Feb 2008 14:03:08 -0700
  • Topographic Effects Wed, 27 Feb 2008 15:59:39 -0700
  • Re: Topographic Effects Wed, 27 Feb 2008 19:28:20 -0700
  • Re: Topographic Effects Thu, 28 Feb 2008 10:51:34 -0700
  • Re: Topographic Effects Thu, 28 Feb 2008 14:35:58 -0700
  • Re: Topographic Effects Thu, 28 Feb 2008 15:16:58 -0700
  • Re: Topographic Effects Thu, 28 Feb 2008 16:01:03 -0700
  • Re: AISC eLearning Fri, 29 Feb 2008 14:45:52 -0700
  • Re: Sign Structures Mon, 3 Mar 2008 15:50:17 -0700
  • Re: Las Vegas Sign Structure Tue, 4 Mar 2008 15:06:24 -0700
  • Re: Las Vegas Sign Structure Tue, 4 Mar 2008 16:58:41 -0700
  • Re: 3x studs in (E) stud wall (Remodel) Wed, 5 Mar 2008 21:56:13 -0700
  • Re: Using Wood-Framed Conventional Construction as a Lateral Shear Resisting ... Thu, 6 Mar 2008 12:18:46 -0700
  • Re: Using Wood-Framed Conventional Construction as a Lateral Shear Resisting ... Thu, 6 Mar 2008 14:13:11 -0700
  • Re: Enforcement Question Thu, 6 Mar 2008 15:31:44 -0700
  • Re: Using Wood-Framed Conventional Construction as a Lateral Shear Resisting ... Fri, 7 Mar 2008 14:31:33 -0700
  • Re: Enforcement Question Mon, 10 Mar 2008 18:59:49 -0600
  • Re: ASCE 7-05 Cantilevered Column System vs. Inverted Pendulum-Type Structures Tue, 11 Mar 2008 13:59:11 -0600
  • Re: ASCE 7-05 Cantilevered Column System vs. Inverted Pendulum-Type Structures Tue, 11 Mar 2008 15:56:02 -0600
  • Re: harold on retainer Tue, 11 Mar 2008 16:33:11 -0600
  • Re: Alternate Wind Provision Wed, 12 Mar 2008 14:47:40 -0600
  • Re: Alternate Wind Provision Wed, 12 Mar 2008 20:47:48 -0600
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 10:13:50 -0600
  • Re: Archiving Trade Magazines Wed, 26 Mar 2008 18:48:57 -0600
  • Re: Programs for cast-in-place Anchors Thu, 27 Mar 2008 15:10:35 -0600

• Joel Adair
  • 1979 SBC Tue, 18 Mar 2008 09:34:56 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 11:28:52 -0600

• John Gobster
  • RE: Shamefully Off-Topic: Carbon Christmas Wed, 20 Feb 2008 13:46:25 -0700

• John L. Smart
  • RE: Contec AAC Mon, 7 Jan 2008 11:01:39 -0700

• John Sieszycki
  • Florida PE for Miami Dade louver test Mon, 17 Mar 2008 10:32:05 -0600

• Jordan Truesdell, PE
  • Re: wood floor system for a Pool table Fri, 4 Jan 2008 06:58:13 -0700
  • Re: More "plan check" stuff ... Wed, 9 Jan 2008 13:15:58 -0700
  • Re: Dual - System ( frame+wall) Fri, 11 Jan 2008 06:02:53 -0700
  • Request for a silverback at Dietrich Metal Framing Tue, 15 Jan 2008 05:45:38 -0700
  • Re: ASCE 7-08 Wed, 23 Jan 2008 17:13:29 -0700
  • Re: ASCE 7-08 Thu, 24 Jan 2008 08:50:46 -0700
  • Re: Bridges Thu, 31 Jan 2008 05:52:55 -0700
  • Re: (no subject) Thu, 31 Jan 2008 13:19:10 -0700
  • Crane rail weld/assembly papers Thu, 31 Jan 2008 13:22:44 -0700
  • Re: Crane rail weld/assembly papers Fri, 1 Feb 2008 09:15:51 -0700
  • Re: Fire wall/shear wall on property line Tue, 5 Feb 2008 13:48:51 -0700
  • Re: Fire wall/shear wall on property line Tue, 5 Feb 2008 14:59:56 -0700
  • Re: Shrinkage of flowable fill against a stone wall Wed, 6 Feb 2008 07:30:54 -0700
  • Re: Fire wall/shear wall on property line Wed, 6 Feb 2008 07:32:29 -0700
  • Re: CBC 2304.11.2.2 - 8-inch Clearance from exposed earth to wood framing members including wood sheathing. Thu, 7 Feb 2008 07:59:08 -0700
  • Re: Annoying and Inane Building Dept Requests, IV Fri, 8 Feb 2008 06:20:33 -0700
  • Re: Shop Drawings Fri, 8 Feb 2008 06:24:22 -0700
  • Re: Shop Drawings Fri, 8 Feb 2008 06:49:41 -0700
  • Re: Pre-$%!#&#& metal buildings Tue, 12 Feb 2008 08:16:54 -0700
  • Re: OpenOffice.org Calc - Spreadsheet question Tue, 12 Feb 2008 08:27:17 -0700
  • Re: PEMB engineers Tue, 12 Feb 2008 12:29:24 -0700
  • Re: Chain Link Fence Backstop Fri, 15 Feb 2008 08:52:10 -0700
  • Re: Chain Link Fence Backstop Fri, 15 Feb 2008 08:55:38 -0700
  • Re: Roof Gardens Live load Sun, 17 Feb 2008 16:27:06 -0700
  • Re: Chain Link Fence Backstop Sun, 17 Feb 2008 16:32:02 -0700
  • Re: Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 11:10:30 -0700
  • Lumber mill stamp; aka how to find out what I joist is installed Mon, 25 Feb 2008 11:49:36 -0700
  • Re: Looking for Foundation Book Tue, 26 Feb 2008 07:07:35 -0700
  • Re: AISC 341-05 Section 7.1 bolt shear strength a ductile limit state? Mon, 3 Mar 2008 22:23:39 -0700
  • Post-its with scales printed on them? Thu, 6 Mar 2008 13:56:48 -0700
  • Re: Using Wood-Framed Conventional Construction as a Lateral Shear Resisting ... Fri, 7 Mar 2008 10:49:47 -0700
  • Re: Enforcement Question Mon, 10 Mar 2008 06:34:34 -0600
  • Re: Conc. Bond to plain steel Wed, 12 Mar 2008 13:38:40 -0600
  • Re: Alternate Wind Provision Wed, 12 Mar 2008 13:41:22 -0600
  • Re: 1979 SBC Tue, 18 Mar 2008 10:34:11 -0600
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 12:38:39 -0600
  • Re: Hand-held Calculator Recommended Wed, 19 Mar 2008 05:44:00 -0600
  • Book/reference on tower foundations Wed, 26 Mar 2008 07:15:30 -0600
  • Re: Book/reference on tower foundations Wed, 26 Mar 2008 09:07:19 -0600

• Joseph Eribarne
  • redundancy rho Tue, 15 Jan 2008 15:10:48 -0700

• Joseph Harouni
  • Re: LARUCP Amendments Mon, 25 Feb 2008 12:47:39 -0700

• Joseph R. Grill
  • Glass guardrail support Fri, 4 Jan 2008 14:02:31 -0700
  • Re: Glass guardrail support Fri, 4 Jan 2008 16:01:30 -0700
  • Re: Glass guardrail support Mon, 7 Jan 2008 10:37:29 -0700
  • Re: Glass guardrail support Mon, 7 Jan 2008 12:51:13 -0700
  • Re: UFC 3-340-01 "Design and Analysis of Hardened Structures to Conventional Weapons Effects" Thu, 10 Jan 2008 08:31:51 -0700
  • Re: Anchors Thu, 17 Jan 2008 12:21:47 -0700
  • Re: Anchors Thu, 17 Jan 2008 14:27:29 -0700
  • Another Timber Connection Question Mon, 4 Feb 2008 09:14:21 -0700
  • Re: Another Timber Connection Questio Tue, 5 Feb 2008 14:46:23 -0700
  • SEAW Wind Procedure Sat, 9 Feb 2008 09:02:46 -0700
  • Re: SEAW Wind Procedure Tue, 12 Feb 2008 06:53:35 -0700
  • Wind Calcs_ Interpolation of Cp Value at flat roof Sat, 16 Feb 2008 09:43:41 -0700
  • Re: Wind Calcs_ Interpolation of Cp Value at flat roof Sat, 16 Feb 2008 09:55:11 -0700
  • Re: IBC 2007 Wind calcs. Sun, 17 Feb 2008 13:23:18 -0700
  • L Bolt Dimensions Thu, 21 Feb 2008 15:20:02 -0700
  • Re: L Bolt Dimensions Thu, 21 Feb 2008 16:04:11 -0700
  • masonry ancher bolt embedment Sun, 2 Mar 2008 12:05:45 -0700
  • RE: Using Wood-Framed Conventional Construction as a Lateral Shear Resisting ... Thu, 6 Mar 2008 14:57:33 -0700
  • Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 10:28:50 -0600
  • RE: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 11:57:38 -0600
  • RE: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 13:00:58 -0600
  • RE: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 16:08:04 -0600
  • RE: Rigid diaph. analysis with diagonal walls Wed, 12 Mar 2008 08:17:23 -0600
  • RE: Rigid diaph. analysis with diagonal walls Wed, 12 Mar 2008 10:38:42 -0600
  • Standard Hook Bend diameters Wed, 12 Mar 2008 10:46:56 -0600
  • Bend diameters Wed, 12 Mar 2008 11:06:04 -0600
  • Email being blocked? maybe Wed, 12 Mar 2008 11:09:21 -0600
  • RE: Rigid diaph. analysis with diagonal walls Thu, 13 Mar 2008 11:12:37 -0600
  • RE: Email being blocked? maybe Fri, 14 Mar 2008 10:37:03 -0600

• Josh Buckholt
  • Seismic Drift Loading Mon, 7 Jan 2008 13:56:46 -0700
  • Re: Flaw ID'd in MN Bridge Collapse Tue, 15 Jan 2008 15:10:51 -0700
  • Re: Bending Stress for Southern Pine #2, NDS Example 5 Sun, 10 Feb 2008 09:03:34 -0700

• Josh Comfort
  • RE: what's wrong? Tue, 15 Jan 2008 09:10:48 -0700
  • RE: Yet another Wind question Tue, 5 Feb 2008 15:26:13 -0700
  • RE: Yet another Wind question Wed, 6 Feb 2008 10:36:39 -0700

• Joshua Buckholt
  • RE: Seismic Drift Loading Mon, 7 Jan 2008 20:59:01 -0700

• Jules
  • Re: Fundamental Period Question ASCE 7-05 12.8.2 Mon, 31 Mar 2008 09:54:55 -0600

• Kang, Sung-hoon
  • Rebar Weight Sun, 20 Jan 2008 18:09:47 -0700

• Kelly Lang
  • Test Thu, 7 Feb 2008 06:42:41 -0700
  • Test #3 Thu, 7 Feb 2008 08:38:41 -0700
  • Test Thu, 7 Feb 2008 09:46:08 -0700

• Ken Loush
  • RE: Good Reference for Light Gage Metal Framing? Fri, 8 Feb 2008 05:56:32 -0700
  • RE: NYC building Code and AISC 13th edition Fri, 28 Mar 2008 08:53:38 -0600

• Ken Peoples
  • MO P. E. needed for piping project Mon, 11 Feb 2008 13:46:03 -0700
  • NYC building Code and AISC 13th edition Fri, 28 Mar 2008 08:05:03 -0600
  • Re: NYC building Code and AISC 13th edition Fri, 28 Mar 2008 09:19:31 -0600

• Kevin Below
  • Re: Viewing the List with MIME Thu, 14 Feb 2008 21:29:49 -0700

• Kipp Martin
  • Re: spacing limits for concrete beam shear reinforcement Tue, 12 Feb 2008 09:08:40 -0700

• KRALIK Georg -NUCLEAR
  • Danish Wind Turbine disintegrating - Feb.27,2008 Mon, 17 Mar 2008 04:36:58 -0600

• Lakshmana Nukala
  • Structural Concrete subject to sub zero temp. conditions Wed, 12 Mar 2008 13:40:07 -0600
  • Structural Concrete subject to sub zero temp. conditions Sun, 16 Mar 2008 12:27:07 -0600
  • Re: Structural Concrete subject to sub zero temp. conditions Mon, 17 Mar 2008 13:21:39 -0600
  • Re: Structural Concrete subject to sub zero temp. conditions Sat, 22 Mar 2008 04:22:38 -0600

• Lang, Kelly
  • Test #2 Thu, 7 Feb 2008 06:26:06 -0700

• Larry Hauer
  • RE: Lighter Loads in IBC vs. UBC Thu, 10 Jan 2008 20:45:13 -0700
  • ASCE 7-05 Cantilevered Columns Wed, 13 Feb 2008 14:36:06 -0700
  • RE: ASCE 7-05 Cantilevered Columns Wed, 13 Feb 2008 15:23:17 -0700
  • ASCE 7-05 Cantilevered Columns‏ Mon, 25 Feb 2008 12:16:31 -0700
  • RE: ASCE 7-05 Cantilevered Columns‏ Mon, 25 Feb 2008 13:54:04 -0700
  • RE: ASCE 7-05 Cantilevered Column System vs. Inverted Pendulum-Type Structures Wed, 12 Mar 2008 08:52:24 -0600
  • Conc. Bond to plain steel Wed, 12 Mar 2008 13:09:25 -0600
  • RE: Conc. Bond to plain steel Wed, 12 Mar 2008 15:26:18 -0600
  • RE: Hand-held Calculator Recommended Wed, 19 Mar 2008 08:59:02 -0600

• Lloyd Pack
  • Re: what's wrong? Tue, 15 Jan 2008 11:30:10 -0700
  • Re: Hand-held Calculator Recommended Tue, 18 Mar 2008 11:26:59 -0600

• Luz-Renaissance
  • DELETE THIS EMAIL TO YOUR MAILING LIST Mon, 28 Jan 2008 20:14:10 -0700
  • RE: DELETE THIS EMAIL TO YOUR MAILING LIST Mon, 28 Jan 2008 20:40:08 -0700

• M, Shimjith (GE Infra, Energy)
  • Decoupling of anchor bolts Sat, 19 Jan 2008 07:37:06 -0700

• M. David Finley, P.E., P.A.
  • Chain Link Fence Backstop Fri, 15 Feb 2008 08:04:16 -0700

• mail
  • Re-roof on 1950's building Fri, 1 Feb 2008 12:22:10 -0700
  • RE: Re-roof on 1950's building Fri, 1 Feb 2008 12:58:24 -0700
  • RE: Re-roof on 1950's building Fri, 1 Feb 2008 13:26:53 -0700
  • Good Reference for Light Gage Metal Framing? Thu, 7 Feb 2008 15:06:07 -0700

• marcia mendez
  • about load duration factor Mon, 14 Jan 2008 13:30:03 -0700

• Marius Tomutza
  • Seismic and Wind Design Software Wed, 9 Jan 2008 11:38:26 -0700
  • LatPro Lateral analysis software Tue, 29 Jan 2008 16:43:42 -0700

• Mark D. Webster
  • Re: Wood LEED Fri, 14 Mar 2008 07:04:08 -0600

• Mark Gilligan
  • Re: More "plan check" stuff ... Wed, 9 Jan 2008 00:54:59 -0700
  • RE: More "plan check" stuff ... Wed, 9 Jan 2008 08:40:01 -0700
  • RE: strange bldg dept request Thu, 17 Jan 2008 09:22:46 -0700
  • Re: Splicing of steel beam Fri, 18 Jan 2008 21:46:24 -0700
  • RE: Steel shop drawings Fri, 1 Feb 2008 23:28:16 -0700
  • RE: More wierd Bldg Dept. requests Sat, 2 Feb 2008 00:36:47 -0700
  • RE: ASTM Sat, 2 Feb 2008 00:48:32 -0700
  • RE: DBAs and codes... Tue, 5 Feb 2008 00:32:35 -0700
  • Re: Soils Reports under CBC 1802.2 Sat, 16 Feb 2008 21:54:09 -0700

• Mark Johnson
  • RE: Handrail Loads vs Short Term Sat, 5 Jan 2008 10:05:35 -0700
  • Re Concrete Anchors Wed, 9 Jan 2008 12:32:03 -0700
  • RE: Decoupling of anchor bolts Sun, 20 Jan 2008 12:20:20 -0700
  • RE: Decoupling of anchor bolts Sun, 20 Jan 2008 23:32:34 -0700
  • Re: ASCE 7-05 Wind Forces Sat, 26 Jan 2008 16:40:49 -0700
  • Re: ASCE 7-05 Wind Forces Sat, 26 Jan 2008 16:47:28 -0700
  • Re: ASCE 7-05 Wind Forces Sun, 27 Jan 2008 00:13:58 -0700
  • Re: Welding of studs through deck to steel beams Fri, 1 Feb 2008 11:36:14 -0700
  • Yet another Wind question Tue, 5 Feb 2008 15:17:03 -0700
  • RE: Yet another Wind question Wed, 6 Feb 2008 10:05:38 -0700
  • RE: Yet another Wind question Wed, 6 Feb 2008 19:57:17 -0700
  • RE: Yet another Wind question Fri, 8 Feb 2008 23:34:22 -0700
  • Re: Viewing the List with MIME Thu, 14 Feb 2008 13:11:04 -0700
  • Re: Seismic Design Manual Examples Fri, 7 Mar 2008 10:48:40 -0700
  • Re: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 15:07:54 -0600
  • Re: Hand-held Calculator Recommended Wed, 19 Mar 2008 11:27:21 -0600
  • Programs for cast-in-place Anchors Thu, 27 Mar 2008 13:58:42 -0600

• Mark L. Puccio
  • Debonding of precast plank topping Thu, 3 Jan 2008 08:01:39 -0700

• Marlou Rodriguez
  • RE: Frost Line Mon, 7 Jan 2008 14:13:49 -0700
  • RE: Out of Line Building Official? Tue, 8 Jan 2008 15:09:28 -0700
  • RE: Seismic and Wind Design Software Wed, 9 Jan 2008 11:43:02 -0700
  • RE: Flaw ID'd in MN Bridge Collapse Tue, 15 Jan 2008 15:06:13 -0700
  • RE: Flaw ID'd in MN Bridge Collapse Tue, 15 Jan 2008 15:23:52 -0700
  • Roof Gardens Live load Tue, 22 Jan 2008 14:43:36 -0700
  • RE: Roof Gardens Live load Tue, 22 Jan 2008 15:08:59 -0700
  • RE: Roof Gardens Live load Thu, 24 Jan 2008 13:49:30 -0700
  • RE: Source for long drill bits in S.F. Bay Area ? Thu, 24 Jan 2008 21:41:05 -0700
  • RE: LatPro Lateral analysis software Tue, 29 Jan 2008 16:51:16 -0700
  • RE: Earthquake Thu, 21 Feb 2008 11:45:22 -0700
  • Strawbale ( use to be RE: Flagstaff, AZ) Mon, 25 Feb 2008 10:18:46 -0700
  • RE: Strawbale methods Tue, 26 Feb 2008 10:31:09 -0700
  • RE: Strawbale ( use to be RE: Flagstaff, AZ) Tue, 26 Feb 2008 10:32:20 -0700
  • RE: Using Wood-Framed Conventional Construction as a Lateral Shear Resisting Method fior Design Thu, 6 Mar 2008 12:52:39 -0700
  • RE: approved epoxy anchor Mon, 24 Mar 2008 11:46:53 -0600
  • RE: approved epoxy anchor Tue, 25 Mar 2008 10:46:11 -0600
  • RE: Cantilever Column system Tue, 25 Mar 2008 11:13:20 -0600
  • RE: Programs for cast-in-place Anchors Fri, 28 Mar 2008 12:54:14 -0600
  • Live load under mechanical and solar units at roofs Fri, 28 Mar 2008 17:18:57 -0600

• Martin Li
  • RE: Frost Line Mon, 7 Jan 2008 14:27:36 -0700

• Marvin Orse
  • Re: Earthquake Fri, 22 Feb 2008 00:43:25 -0700

• Matthew
  • Fwd: Difference between SCBF OCBF Tue, 15 Jan 2008 09:18:18 -0700
  • Gross overturning Thu, 31 Jan 2008 11:09:23 -0700
  • Re: Gross overturning Thu, 31 Jan 2008 11:31:20 -0700
  • Re: Gross overturning Thu, 31 Jan 2008 12:09:14 -0700
  • Re: IBC 2007 Wind calcs. Thu, 14 Feb 2008 10:49:15 -0700
  • Cantilever Column system Tue, 25 Mar 2008 11:07:27 -0600

• Matthew Shear
  • 3-D modeling Tue, 15 Jan 2008 15:30:29 -0700
  • RE: Enercalc 6.0 Thu, 17 Jan 2008 13:10:22 -0700
  • RE: ICC ESR REPORT 1772 & ICC ER 4945 (S.S.T. Epoxy) Thu, 17 Jan 2008 13:13:51 -0700
  • SCBF Wed, 23 Jan 2008 12:47:09 -0700
  • RE: SCBF Wed, 23 Jan 2008 14:29:38 -0700

• Matthew Stuart
  • Test Tue, 5 Feb 2008 13:52:19 -0700
  • Reply Test Thu, 7 Feb 2008 08:45:51 -0700

• Micayas, Julius
  • Frost Line Mon, 7 Jan 2008 13:34:03 -0700
  • RE: Frost Line Mon, 7 Jan 2008 15:58:16 -0700
  • RE: Frost Line Mon, 7 Jan 2008 16:42:25 -0700
  • RE: Splicing of steel beam. Fri, 18 Jan 2008 12:16:08 -0700
  • RE: Slab On Grade STAAD Model Fri, 25 Jan 2008 12:24:10 -0700
  • RE: FEMA, ASCE, IBC2006 Wed, 30 Jan 2008 07:14:04 -0700
  • RE: Base Plate design Thu, 28 Feb 2008 07:15:03 -0700
  • Emergency Opening from a concrete tunnel Mon, 17 Mar 2008 10:34:32 -0600

• Michael Brooks
  • RE: Anchors & Enercalc Thu, 17 Jan 2008 12:50:07 -0700
  • RE: Enercalc 6.0 Thu, 17 Jan 2008 13:47:38 -0700
  • RE: Enercalc 6 Tue, 5 Feb 2008 12:53:04 -0700

• Michael Hemstad
  • Welding of studs through deck to steel beams Fri, 1 Feb 2008 09:22:13 -0700

• Michel
  • Re: Seismic Design Manual Examples Fri, 7 Mar 2008 23:02:22 -0700
  • N.Y. Crane Collapse Sat, 15 Mar 2008 21:56:51 -0600
  • Structural Observation Contract Clause Wed, 26 Mar 2008 21:39:20 -0600

• Michel Blangy
  • RE: Engineering Video Game for Students Tue, 22 Jan 2008 09:37:57 -0700
  • Enercalc 6.0 Mon, 28 Jan 2008 16:35:13 -0700
  • RE: 06 IBC Wind and Seismic Seminar Mon, 4 Feb 2008 17:02:50 -0700
  • RE: CBC 2007 Summary for Wood Thu, 7 Feb 2008 13:32:20 -0700
  • RE: PLEASE READ NOW - Real virus Wed, 13 Feb 2008 14:32:12 -0700
  • ASCE 7-?? Thu, 21 Feb 2008 09:24:03 -0700
  • RE: Strawbale methods Tue, 26 Feb 2008 11:15:23 -0700
  • Overhead Electrical Service Feeder Support Mon, 3 Mar 2008 09:52:37 -0700
  • Seismic Design Manual Examples Thu, 6 Mar 2008 17:17:27 -0700
  • RE: Seismic Design Manual Examples Fri, 7 Mar 2008 17:00:58 -0700
  • N.Y. Crane Collapse Mon, 17 Mar 2008 10:56:12 -0600
  • Pipe Wall Strength Mon, 17 Mar 2008 14:12:51 -0600
  • RE: Pipe Wall Strength Mon, 17 Mar 2008 14:45:24 -0600
  • RE: Pipe Wall Strength Mon, 17 Mar 2008 15:59:42 -0600
  • RE: ASCE being attacked Wed, 26 Mar 2008 16:45:17 -0600

• Michel, Greg
  • RE: CMU Bond Beam at Control Joint Mon, 11 Feb 2008 16:49:59 -0700

• Michelle Motchos
  • RE: CBO Mon, 11 Feb 2008 09:10:41 -0700
  • Chapter 17- IBC Wed, 20 Feb 2008 11:38:38 -0700
  • RE: What is 2t plastic hinge gusset plate design? Wed, 26 Mar 2008 05:57:41 -0600
  • ASCE redundancy factor Fri, 28 Mar 2008 05:46:29 -0600
  • RE: ASCE redundancy factor Fri, 28 Mar 2008 12:37:31 -0600

• Mike Hokama
  • Splicing of steel beam. Fri, 18 Jan 2008 11:22:25 -0700

• Mike Jones
  • Re: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 12:15:59 -0600

• mrkgp
  • WARNING against using Staples in shear walls/diaphragms Wed, 6 Feb 2008 09:10:28 -0700

• Murvin Ragaven
  • Timber design software Wed, 16 Jan 2008 22:10:07 -0700

• Nancy Tennebaum
  • Re: Live load under mechanical and solar units at roofs Fri, 28 Mar 2008 17:36:39 -0600

• ndz28
  • Enercalc 6 Tue, 5 Feb 2008 11:16:51 -0700

• Neil Moore
  • Re: Out of Line Building Official? Tue, 8 Jan 2008 16:58:40 -0700
  • Re: acceptable bend radius for a cable or tendon? Thu, 24 Jan 2008 20:30:37 -0700
  • Re: IBC 2007 Wind calcs. - 2007 CBC load combinations Thu, 14 Feb 2008 17:49:19 -0700
  • Re: Earthquake Thu, 21 Feb 2008 09:14:24 -0700
  • Re: Base Plate design Thu, 28 Feb 2008 08:30:13 -0700
  • Re: Sign Structures Fri, 29 Feb 2008 10:33:56 -0700
  • Re: Enforcement Question Fri, 7 Mar 2008 12:41:50 -0700

• Nels Roselund
  • RE: Splicing of steel beam. Fri, 18 Jan 2008 14:53:21 -0700
  • RE: Splicing of steel beam. Mon, 21 Jan 2008 11:51:46 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 19:18:30 -0700
  • RE: CMU Infills Fri, 25 Jan 2008 17:06:08 -0700
  • RE: Bridges Wed, 30 Jan 2008 22:36:38 -0700
  • RE: Use 8d nails or 10d nails for Structural Panel Shear Walls Mon, 4 Feb 2008 14:52:13 -0700
  • RE: Shrinkage of flowable fill against a stone wall Tue, 5 Feb 2008 16:29:38 -0700
  • RE: Drilled-in anchors for ungrouted masonry? Thu, 14 Feb 2008 10:35:19 -0700
  • RE: Drilled-in anchors for ungrouted masonry? Thu, 14 Feb 2008 16:46:29 -0700
  • RE: Drilled-in anchors for ungrouted masonry? Thu, 14 Feb 2008 19:58:19 -0700
  • RE: Enforcement Question Fri, 7 Mar 2008 15:51:10 -0700
  • RE: Seismic Design Manual Examples Fri, 7 Mar 2008 17:41:04 -0700

• Padmanabhan Rajendran
  • Re: UFC 3-340-01 "Design and Analysis of Hardened Structures to Conventional Weapons Effects" Wed, 9 Jan 2008 11:12:03 -0700

• Parag Bande
  • Database For Controlling Engineering Drawings Tue, 5 Feb 2008 04:35:40 -0700
  • Openings In Pool wall Mon, 11 Feb 2008 22:14:58 -0700

• Paul Blomberg
  • Re: Glass guardrail support Mon, 7 Jan 2008 10:02:21 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate Thu, 24 Jan 2008 07:36:04 -0700
  • CMU Bond Beam at Control Joint Mon, 11 Feb 2008 15:37:44 -0700
  • Re: Steel Plate Engineering Data... Wed, 13 Feb 2008 17:17:41 -0700
  • Re: Steel Plate Engineering Data... Thu, 14 Feb 2008 07:43:08 -0700
  • Re: Chapter 17- IBC Wed, 20 Feb 2008 12:06:25 -0700
  • Re: Hot Weather Concreting Thu, 28 Feb 2008 10:37:27 -0700

• Paul Feather
  • RE: Lighter Loads in IBC vs. UBC Wed, 9 Jan 2008 13:35:18 -0700
  • RE: Roof Gardens Live load Tue, 22 Jan 2008 14:46:40 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate & bad EN Thu, 24 Jan 2008 10:24:20 -0700
  • RE: (no subject) Thu, 31 Jan 2008 19:33:15 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 10:34:47 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 10:58:45 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 17:38:41 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 19:09:08 -0700
  • Enforcement Question Thu, 6 Mar 2008 15:09:47 -0700
  • RE: Enforcement Question Fri, 7 Mar 2008 09:58:22 -0700
  • RE: Enforcement Question Fri, 7 Mar 2008 10:55:02 -0700
  • Employment opportunity Fri, 7 Mar 2008 12:14:17 -0700
  • RE: Employment opportunity Fri, 7 Mar 2008 12:47:37 -0700
  • RE: Pipe Wall Strength Mon, 17 Mar 2008 14:48:24 -0600

• Paul Ransom
  • Re: Splicing of steel beam. Sat, 19 Jan 2008 12:58:21 -0700
  • Re: Splicing of steel beam Sun, 20 Jan 2008 09:12:15 -0700
  • Re: Decoupling of anchor bolts Sun, 27 Jan 2008 12:25:36 -0700
  • Re: A Welding question Sun, 27 Jan 2008 12:27:59 -0700
  • Re: Pre-$%!#&#& metal buildings Wed, 13 Feb 2008 00:01:09 -0700
  • Re: Fw: PLEASE READ NOW - Real virus [OT: not really about viruses] Sat, 16 Feb 2008 14:14:28 -0700
  • Re: Moving Walkway Seismic Restraint Sat, 16 Feb 2008 15:22:31 -0700
  • Re: seaint Digest for 18 Mar 2008 Wed, 19 Mar 2008 18:41:46 -0600
  • Re: Tekla Structures Training Centre at William Hare, Chennai, In Fri, 21 Mar 2008 09:39:00 -0600

• Phuong Nguyen
  • Re: LARUCP Amendments Mon, 25 Feb 2008 14:43:23 -0700
  • RE: LARUCP Amendments Mon, 25 Feb 2008 14:51:23 -0700

• Pinyon Engineering
  • wood floor system for a Pool table Thu, 3 Jan 2008 12:33:25 -0700
  • RE: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 9 Jan 2008 17:08:49 -0700
  • 3x3 square sill plate washers Fri, 18 Jan 2008 10:05:12 -0700
  • Strawbale methods Tue, 26 Feb 2008 09:24:34 -0700

• pj . rodgers
  • Re: CBC Code Question on Engineer or Architect of Record Thu, 21 Feb 2008 14:28:30 -0700

• Poldy Simovitz
  • RE: STAAD.pro 2007and AISC Seismic Table I-8-1 Fri, 8 Feb 2008 01:32:10 -0700

• raincat1
  • CBC Sect 1633A Exemption Tue, 18 Mar 2008 08:51:28 -0600

• raja mohan
  • Soil improvement methods Tue, 25 Mar 2008 12:02:45 -0600

• Ralph Kratz
  • Re: ASCE 7-08 Wed, 23 Jan 2008 18:36:00 -0700

• Ramy Shameia
  • FrameSolver 2D Sat, 2 Feb 2008 23:32:38 -0700

• Rand W Holtham
  • Fw: PLEASE READ NOW - Real virus Tue, 12 Feb 2008 13:13:11 -0700

• Randall Moore PE SE
  • RE: steel connection software Tue, 22 Jan 2008 12:46:03 -0700

• ranmoo(--nospam--at)ec.rr.com
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 11:03:33 -0600

• Ray Pixley
  • Re: Base Plate design Fri, 29 Feb 2008 06:52:31 -0700

• Ray Shingler
  • Engineering Video Game for Students Mon, 21 Jan 2008 20:33:11 -0700

• Rhkratzse
  • Re: what's wrong? Tue, 15 Jan 2008 08:02:32 -0700
  • Re: what's wrong? Tue, 15 Jan 2008 09:44:18 -0700
  • Re: what's wrong? Tue, 15 Jan 2008 10:24:37 -0700
  • Re: what's wrong - Soil Investigation Requirements -- ad nausium Wed, 16 Jan 2008 12:44:37 -0700
  • Re: Anchors Thu, 17 Jan 2008 13:43:02 -0700
  • Re: 3-D modeling - ASCE 7-05 12.7.3 needs an exception for light-frame timber Fri, 18 Jan 2008 11:43:30 -0700
  • Re: Estimating Software [and privacy] Sun, 20 Jan 2008 14:52:39 -0700
  • Re: ASCE 7-08 Thu, 24 Jan 2008 11:15:01 -0700
  • Re: Retaining Wall Problem Thu, 24 Jan 2008 13:13:47 -0700
  • Re: Retaining Wall Problem Thu, 24 Jan 2008 13:20:55 -0700
  • Source for long drill bits in S.F. Bay Area ? Thu, 24 Jan 2008 19:23:21 -0700
  • Re: Source for long drill bits in S.F. Bay Area ? Thu, 24 Jan 2008 19:56:56 -0700
  • Re: CMU Infills Mon, 28 Jan 2008 15:34:17 -0700
  • Re: Bridges Wed, 30 Jan 2008 16:33:54 -0700
  • Re: Bridges Wed, 30 Jan 2008 19:54:02 -0700
  • Re: Bridges Thu, 31 Jan 2008 09:37:10 -0700
  • Re: Bridges Thu, 31 Jan 2008 15:01:18 -0700
  • Re: Fw: PLEASE READ NOW - Real virus [OT: not really about viruses] Tue, 12 Feb 2008 13:17:08 -0700
  • Re: Alternate Wind Provision Fri, 15 Feb 2008 10:39:28 -0700
  • Re: IBC 2007 Wind calcs. Fri, 15 Feb 2008 10:47:19 -0700
  • Re: Soils Reports under CBC 1802.2 Fri, 15 Feb 2008 13:31:26 -0700
  • Re: Soils Reports under CBC 1802.2 Fri, 15 Feb 2008 15:09:54 -0700
  • Re: ASCE 7-05 Errata - Caution: content contains whining Mon, 18 Feb 2008 13:47:40 -0700
  • Re: Earthquake (experiencing) Thu, 21 Feb 2008 13:50:49 -0700
  • Re: Earthquake (experiencing) Thu, 21 Feb 2008 15:51:20 -0700
  • Re: Frozen Masonry Fri, 22 Feb 2008 13:14:21 -0700
  • Re: Hot Weather Concreting Wed, 27 Feb 2008 18:20:29 -0700
  • Re: Sign Structures Mon, 3 Mar 2008 17:02:25 -0700
  • "Structuring" Mon, 10 Mar 2008 18:46:14 -0600
  • Re: Conc. Bond to plain steel Wed, 12 Mar 2008 14:26:34 -0600
  • Re: Alternate Wind Provision Wed, 12 Mar 2008 14:29:47 -0600
  • Re: Wood LEED Mon, 17 Mar 2008 16:03:07 -0600
  • Re: Structural Concrete subject to sub zero temp. conditions Mon, 17 Mar 2008 16:12:43 -0600
  • Re: 1979 SBC [AKA Mickey] Tue, 18 Mar 2008 10:36:17 -0600
  • Re: Archiving Trade Magazines Fri, 28 Mar 2008 10:40:46 -0600
  • Re: Live load under mechanical and solar units at roofs [aka beer] Fri, 28 Mar 2008 17:24:09 -0600
  • Re: Live load under mechanical and solar units at roofs Fri, 28 Mar 2008 17:50:39 -0600
  • Re: Live load under mechanical and solar units at roofs Fri, 28 Mar 2008 18:28:46 -0600
  • Re: Live load under mechanical and solar units at roofs Fri, 28 Mar 2008 18:44:24 -0600

• Rich Lewis
  • Hollow Core Plank Recommendation Thu, 10 Jan 2008 18:40:25 -0700
  • RE: Decoupling of anchor bolts Sat, 26 Jan 2008 07:48:09 -0700
  • Looking for Foundation Book Sun, 24 Feb 2008 15:09:14 -0700
  • RE: Looking for Foundation Book Mon, 25 Feb 2008 21:02:04 -0700

• Richard L. Hess
  • RE: Bridges Wed, 30 Jan 2008 19:12:13 -0700
  • RE: WARNING against using Staples in shear walls/diaphragms Wed, 6 Feb 2008 12:38:51 -0700
  • RE: Rigid diaph. analysis with diagonal walls Tue, 11 Mar 2008 14:57:57 -0600

• Rick
  • Handrail Loads vs Short Term Fri, 4 Jan 2008 11:39:00 -0700

• Rod Tayong
  • Re: CMU Infills Tue, 29 Jan 2008 07:59:56 -0700

• Roger Davis
  • RE: Slabs on grade at garage and people doors Mon, 14 Jan 2008 11:14:33 -0700

• Russell VeRost
  • Fw: PLEASE READ NOW - Real virus Mon, 11 Feb 2008 17:36:32 -0700

• S Y Lai
  • Alternate Wind Provision Fri, 15 Feb 2008 00:01:52 -0700

• Salbador Dorado
  • Masonry ASD Method Question Thu, 13 Mar 2008 09:15:26 -0600
  • Masonry Question Thu, 13 Mar 2008 17:59:44 -0600
  • RE: Masonry Question Fri, 14 Mar 2008 09:41:51 -0600

• sam2000 . (sam2000)
  • Re: ASCE 7-08 Wed, 23 Jan 2008 01:44:46 -0700

• Sandman
  • Difference between SCBF OCBF Fri, 11 Jan 2008 10:21:48 -0700
  • Re: DELETE THIS EMAIL TO YOUR MAILING LIST Mon, 28 Jan 2008 20:26:31 -0700

• Scott Martin
  • Simplified Seismic Fa Thu, 28 Feb 2008 09:05:00 -0700
  • RE: Simplified Seismic Fa Thu, 28 Feb 2008 10:17:14 -0700

• Scott Maxwell
  • RE: wood floor system for a Pool table Thu, 3 Jan 2008 16:46:02 -0700
  • RE: (no subject) Thu, 3 Jan 2008 23:54:56 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 11:44:59 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 12:01:11 -0700
  • Re: Estimating Software [and privacy] Sun, 20 Jan 2008 22:52:40 -0700
  • RE: Rebar Weight Mon, 21 Jan 2008 11:48:02 -0700
  • Re: ASCE 7-08 Mon, 21 Jan 2008 20:24:57 -0700
  • RE: ASCE 7-08 Wed, 23 Jan 2008 17:27:35 -0700
  • RE: ASCE 7-08 Thu, 24 Jan 2008 10:43:12 -0700
  • RE: CMU Infills Fri, 25 Jan 2008 15:43:36 -0700
  • RE: ASCE 7-05 Wind Forces Sun, 27 Jan 2008 14:39:10 -0700
  • RE: FEMA, ASCE, IBC2006 Wed, 30 Jan 2008 08:05:19 -0700
  • RE: CA Special Surveying Exam Suggested References Wed, 30 Jan 2008 10:22:41 -0700
  • RE: Yet another Wind question Wed, 6 Feb 2008 17:04:50 -0700
  • RE: Question about Shear wall aspect ratio Wed, 6 Feb 2008 17:05:01 -0700
  • RE: ASCE 3 Wed, 6 Feb 2008 18:23:26 -0700
  • RE: Yet another Wind question Thu, 7 Feb 2008 04:29:24 -0700
  • RE: Yet another Wind question Thu, 7 Feb 2008 12:15:26 -0700
  • RE: Fire wall/shear wall on property line Thu, 7 Feb 2008 13:02:14 -0700
  • RE: Shop Drawings Thu, 7 Feb 2008 14:35:41 -0700
  • RE: Minimum edge distance OR back to the treated lumber question..... Thu, 7 Feb 2008 21:22:08 -0700
  • RE: basic lateral force question Fri, 8 Feb 2008 08:43:58 -0700
  • RE: Minimum edge distance OR back to the treated lumber question..... Fri, 8 Feb 2008 08:44:32 -0700
  • RE: Yet another Wind question Fri, 8 Feb 2008 17:28:46 -0700
  • RE: Fire wall/shear wall on property line Fri, 8 Feb 2008 17:30:01 -0700
  • RE: CMU Bond Beam at Control Joint Mon, 11 Feb 2008 17:11:05 -0700
  • RE: Pre-$%!#&#& metal buildings Mon, 11 Feb 2008 21:36:29 -0700
  • RE: PLEASE READ NOW - Real virus Tue, 12 Feb 2008 08:26:07 -0700
  • RE: spacing limits for concrete beam shear reinforcement Tue, 12 Feb 2008 09:31:46 -0700
  • RE: spacing limits for concrete beam shear reinforcement Tue, 12 Feb 2008 18:41:50 -0700
  • RE: spacing limits for concrete beam shear reinforcement Tue, 12 Feb 2008 18:42:56 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 10:22:42 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 12:00:41 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 17:24:06 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 17:25:10 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 17:26:53 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 18:25:44 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 18:27:55 -0700
  • RE: IBC 2007 Wind calcs. Thu, 14 Feb 2008 18:41:38 -0700
  • RE: IBC 2007 Wind calcs. Fri, 15 Feb 2008 08:22:04 -0700
  • RE: IBC 2007 Wind calcs. Fri, 15 Feb 2008 08:37:36 -0700
  • RE: IBC 2007 Wind calcs. Fri, 15 Feb 2008 09:07:24 -0700
  • RE: IBC 2007 Wind calcs. Fri, 15 Feb 2008 09:24:32 -0700
  • RE: IBC 2007 Wind calcs. Fri, 15 Feb 2008 09:25:12 -0700
  • RE: IBC 2007 Wind calcs. Fri, 15 Feb 2008 09:27:56 -0700
  • RE: Alternate Wind Provision Fri, 15 Feb 2008 10:55:34 -0700
  • RE: Chain Link Fence Backstop Sat, 16 Feb 2008 09:01:34 -0700
  • RE: Wind Calcs_ Interpolation of Cp Value at flat roof Sat, 16 Feb 2008 09:50:16 -0700
  • RE: Wind Calcs_ Interpolation of Cp Value at flat roof Sat, 16 Feb 2008 13:26:30 -0700
  • RE: IBC 2007 Wind calcs. Mon, 18 Feb 2008 09:04:26 -0700
  • RE: Another Seismic Design Example CsubD Mon, 18 Feb 2008 15:58:42 -0700
  • RE: ASCE 7-05 Errata - Caution: content contains whining Mon, 18 Feb 2008 15:59:05 -0700
  • RE: Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 11:15:59 -0700
  • RE: Alternate Wind Provision Wed, 12 Mar 2008 21:45:17 -0600
  • RE: Masonry Question Fri, 14 Mar 2008 14:07:26 -0600
  • RE: Wood LEED Fri, 14 Mar 2008 23:47:05 -0600
  • RE: Wood LEED Sat, 15 Mar 2008 09:08:57 -0600
  • RE: Wood LEED Sat, 15 Mar 2008 10:43:05 -0600
  • RE: Danish Wind Turbine disintegrating - Feb.27,2008 Mon, 17 Mar 2008 10:32:29 -0600
  • RE: Stainless Steel - answering my own question Tue, 18 Mar 2008 22:17:30 -0600
  • RE: IBC Eq 21-3 Sun, 23 Mar 2008 17:54:58 -0600
  • RE: ASCE being attacked Wed, 26 Mar 2008 15:58:41 -0600
  • RE: Live load under mechanical and solar units at roofs Fri, 28 Mar 2008 18:40:56 -0600

• Scott, William N
  • RE: Anchors Thu, 17 Jan 2008 12:58:28 -0700
  • RE: 3-D modeling - ASCE 7-05 12.7.3 needs an exception for light-frame timber Fri, 18 Jan 2008 10:17:28 -0700
  • RE: Rebar Weight Mon, 21 Jan 2008 18:04:18 -0700
  • RE: Steel Plate Engineering Data... Wed, 13 Feb 2008 16:53:03 -0700

• seaint04
  • Testing In-Place Anchor Bolts Tue, 4 Mar 2008 08:42:18 -0700

• Shaun Dustin
  • RE: Overcoming Friction Mon, 17 Mar 2008 12:46:58 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 11:32:33 -0600

• Sherman, James J. (Jim)
  • RE: Test Thu, 7 Feb 2008 10:01:51 -0700

• sscholl2(--nospam--at)juno.com
  • Re: Small Job on the Westside (I think it's Beverly Hills, but I'm not sure) Tue, 1 Jan 2008 11:20:32 -0700
  • RE: Small Job on the Westside (I think it's Beverly Hills, but I'm not sure) Thu, 3 Jan 2008 23:20:44 -0700
  • Re: Out of Line Building Official? Wed, 9 Jan 2008 20:15:44 -0700
  • Re: what's wrong? Tue, 15 Jan 2008 21:55:34 -0700
  • IBC 2007 Wind calcs. Thu, 14 Feb 2008 10:11:22 -0700
  • Re: IBC 2007 Wind calcs. Thu, 14 Feb 2008 12:32:27 -0700
  • Re: wind codes... Fri, 15 Feb 2008 23:09:45 -0700
  • RE: Alternate Wind Provision Fri, 15 Feb 2008 23:57:32 -0700
  • Re: IBC 2007 Wind calcs. Sun, 17 Feb 2008 17:00:33 -0700
  • Re: Flagstaff, AZ Sun, 24 Feb 2008 00:13:29 -0700
  • RE: Is a garage partially open, open or closed? Sun, 24 Feb 2008 00:26:32 -0700
  • Re: Strawbale ( use to be RE: Flagstaff, AZ) Tue, 26 Feb 2008 10:09:18 -0700
  • Re: Concrete exposed to seawater Fri, 29 Feb 2008 20:41:44 -0700
  • RE: Concrete exposed to seawater Tue, 4 Mar 2008 09:43:04 -0700
  • Re: Enforcement Question Thu, 6 Mar 2008 22:02:03 -0700
  • Re: 3x studs in (E) stud wall (Remodel) Sat, 8 Mar 2008 18:57:27 -0700
  • RE: Alternate Wind Provision Wed, 12 Mar 2008 13:11:55 -0600
  • Re: Wood LEED Sat, 15 Mar 2008 18:47:10 -0600
  • Re: Structural Concrete subject to sub zero temp. conditions Mon, 17 Mar 2008 20:33:21 -0600
  • RE: Pipe Wall Strength Mon, 17 Mar 2008 20:34:26 -0600
  • RE: ASCE being attacked Wed, 26 Mar 2008 23:19:51 -0600
  • Re: House Leveling Sun, 30 Mar 2008 21:56:53 -0600

• Stan Caldwell
  • Re: ASCE being attacked Tue, 25 Mar 2008 21:04:12 -0600
  • Re: ASCE being attacked Wed, 26 Mar 2008 16:51:37 -0600

• Steve Gordin
  • Re: Glass guardrail support Mon, 14 Jan 2008 08:29:41 -0700
  • what's wrong? Tue, 15 Jan 2008 00:12:04 -0700
  • Re: what's wrong? Tue, 15 Jan 2008 07:33:29 -0700
  • Re: what's wrong? Tue, 15 Jan 2008 08:57:48 -0700
  • Re: what's wrong? Tue, 15 Jan 2008 10:03:19 -0700
  • Re: what's wrong? Tue, 15 Jan 2008 10:58:34 -0700
  • Re: what's wrong? Tue, 15 Jan 2008 11:41:05 -0700
  • Re: 3-D modeling Wed, 16 Jan 2008 11:26:46 -0700
  • Anchors Wed, 16 Jan 2008 13:07:26 -0700
  • Re: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 16 Jan 2008 15:11:58 -0700
  • Re: Anchors Wed, 16 Jan 2008 15:12:09 -0700
  • Re: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 16 Jan 2008 15:57:59 -0700
  • Re: Anchors Wed, 16 Jan 2008 15:58:36 -0700
  • Enercalc 6.0 Wed, 16 Jan 2008 16:08:07 -0700
  • Re: Enercalc 6.0 Wed, 16 Jan 2008 16:52:52 -0700
  • Anchors & Enercalc Thu, 17 Jan 2008 11:58:01 -0700
  • Re: Anchors Thu, 17 Jan 2008 12:12:05 -0700
  • Re: Anchors Thu, 17 Jan 2008 12:32:56 -0700
  • Re: Anchors Thu, 17 Jan 2008 12:35:43 -0700
  • Re: Anchors Thu, 17 Jan 2008 13:01:41 -0700
  • Re: Anchors & Enercalc Thu, 17 Jan 2008 13:01:55 -0700
  • Re: Anchors Thu, 17 Jan 2008 13:54:15 -0700
  • Re: Splicing of steel beam. Fri, 18 Jan 2008 12:44:56 -0700
  • Re: The More Things Change: NYT Article on Restoration of Utah State Capitol Building Tue, 22 Jan 2008 16:40:07 -0700
  • Re: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 13:09:56 -0700
  • Re: drilling, driving near existing residence Thu, 24 Jan 2008 08:38:09 -0700
  • Re: Retaining Wall Problem Thu, 24 Jan 2008 08:38:48 -0700
  • Re: ASCE 7-08 Thu, 24 Jan 2008 12:25:10 -0700
  • Re: Retaining Wall Problem Thu, 24 Jan 2008 13:18:53 -0700
  • Re: ASCE 7-05 Wind Forces Sat, 26 Jan 2008 18:15:21 -0700
  • Bridges Wed, 30 Jan 2008 16:20:23 -0700
  • Re: Gross overturning Thu, 31 Jan 2008 11:19:33 -0700
  • Re: Gross overturning Thu, 31 Jan 2008 11:56:39 -0700
  • Re: Gross overturning Thu, 31 Jan 2008 12:36:52 -0700
  • Re: Bridges Thu, 31 Jan 2008 12:43:03 -0700
  • 06 IBC Wind and Seismic Seminar Mon, 4 Feb 2008 16:53:46 -0700
  • Re: 06 IBC Wind and Seismic Seminar Mon, 4 Feb 2008 17:28:46 -0700
  • Re: Moving Walkway Seismic Restraint Tue, 12 Feb 2008 11:50:28 -0700
  • Re: Is a garage partially open, open or closed? Tue, 19 Feb 2008 08:28:12 -0700
  • Re: residential bridge design loads Thu, 6 Mar 2008 10:21:25 -0700
  • Re: Enforcement Question Thu, 6 Mar 2008 15:44:23 -0700
  • Re: approved epoxy anchor Mon, 24 Mar 2008 13:33:26 -0600
  • Re: subgrade modulus Wed, 26 Mar 2008 10:57:22 -0600
  • Re: ASCE being attacked Wed, 26 Mar 2008 12:23:01 -0600
  • Re: Live load under mechanical and solar units at roofs Fri, 28 Mar 2008 18:15:19 -0600

• SThreewitt
  • Scott Threewitt is out of the office. Fri, 28 Mar 2008 03:01:24 -0600

• Stuart, Matthew
  • RE: Debonding of precast plank topping Wed, 2 Jan 2008 06:39:55 -0700
  • Residential Real Estate Purchase Due Diligence Mon, 7 Jan 2008 08:36:08 -0700
  • RE: strange bldg dept request Thu, 17 Jan 2008 07:44:03 -0700
  • RE: strange bldg dept request Thu, 17 Jan 2008 08:42:47 -0700
  • RE: Anyone Work (Now or Ever) For A Design-Build Firm? How'd You Handle Specs? Wed, 30 Jan 2008 10:20:14 -0700
  • RE: pre-fabricated building Mon, 4 Feb 2008 06:57:19 -0700
  • Test Tue, 5 Feb 2008 13:52:55 -0700
  • Test Thu, 7 Feb 2008 05:04:17 -0700
  • RE: Test Thu, 7 Feb 2008 07:22:01 -0700
  • Local Aspen Colorado Structural Engineer Needed Wed, 13 Feb 2008 11:25:12 -0700
  • Flagstaff, AZ Thu, 21 Feb 2008 05:52:39 -0700

• sutej
  • Re: Good Reference for Light Gage Metal Framing? Fri, 8 Feb 2008 11:40:59 -0700

• Syed Faiz
  • RE: 4th CINPAR - International Conference on Structural Defects and Repair - 25-28 June 2008, University of Aveiro, Portugal Sun, 20 Jan 2008 07:33:12 -0700

• Szuchuan Chang
  • Use 8d nails or 10d nails for Structural Panel Shear Walls Sun, 3 Feb 2008 00:54:01 -0700
  • Re: Use 8d nails or 10d nails for Structural Panel Shear Walls Sun, 3 Feb 2008 12:55:14 -0700
  • Bending Stress for Southern Pine #2, NDS Example 5 Sat, 9 Feb 2008 16:07:03 -0700
  • Re: Bending Stress for Southern Pine #2, NDS Example 5 Sun, 10 Feb 2008 01:08:27 -0700
  • Re: Bending Stress for Southern Pine #2, NDS Example 5 Sun, 10 Feb 2008 12:13:51 -0700
  • Re: Roof Gardens Live load Sun, 17 Feb 2008 12:37:53 -0700
  • Re: Seismic Design Example Sun, 17 Feb 2008 20:26:27 -0700
  • Adjustment Factor in NDS Appendix N (resistance factor) Mon, 18 Feb 2008 19:13:34 -0700
  • en values in CBC Table 2305.2.2(1) Wed, 20 Feb 2008 15:54:26 -0700
  • Questions on Design Manual Vol 2, Ex 2 Wed, 20 Feb 2008 21:50:07 -0700
  • Availability of 3.5", 5.5" Wide DF/HF Structural Glued Laminated Timber Sat, 23 Feb 2008 15:48:45 -0700
  • Re: Availability of 3.5", 5.5" Wide DF/HF Structural Glued Laminated Timber Mon, 25 Feb 2008 11:10:06 -0700
  • Re: ASCE redundancy factor Fri, 28 Mar 2008 11:54:00 -0600

• t.w.allen
  • RE: Splicing of steel beam. Fri, 18 Jan 2008 22:59:11 -0700
  • Re: Splicing of steel beam Fri, 18 Jan 2008 22:59:31 -0700
  • Re: ASCE 7-05 Wind Forces Sat, 26 Jan 2008 17:43:42 -0700
  • Re: ASCE 7-05 Wind Forces Sat, 26 Jan 2008 18:28:53 -0700
  • RE: AISC eLearning Fri, 29 Feb 2008 14:45:06 -0700
  • RE: AISC eLearning Fri, 29 Feb 2008 15:05:10 -0700

• Tarek Mokhtar
  • Re: Retaining Wall Problem Thu, 24 Jan 2008 12:51:25 -0700

• Terangue Gillham
  • Debonding of precast plank topping Wed, 2 Jan 2008 02:04:30 -0700
  • Hot Weather Concreting Wed, 27 Feb 2008 17:40:44 -0700

• Terry Weatherby
  • RE: CMU Bond Beam at Control Joint Mon, 11 Feb 2008 17:22:25 -0700
  • RE: Soils Reports under CBC 1802.2 Sat, 16 Feb 2008 15:53:34 -0700
  • CBC Code Question on Engineer or Architect of Record Wed, 20 Feb 2008 17:40:01 -0700
  • RE: Another ASCE 7-05 Wind Load Question Wed, 20 Feb 2008 17:43:32 -0700
  • RE: Simplified Seismic Fa Thu, 28 Feb 2008 09:49:48 -0700
  • RE: 3x studs in (E) stud wall (Remodel) Thu, 6 Mar 2008 10:42:53 -0700
  • Using Wood-Framed Conventional Construction as a Lateral Shear Resisting Method fior Design Thu, 6 Mar 2008 10:58:22 -0700
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 10:35:31 -0600
  • RE: Cantilever Column system Tue, 25 Mar 2008 18:22:59 -0600

• Thomas Davidson
  • RE: UFC 3-340-01 "Design and Analysis of Hardened Structures to Conventional Weapons Effects" Wed, 9 Jan 2008 15:00:14 -0700

• Thor Matteson
  • Re: Use 8d nails or 10d nails for Structural Panel Shear Walls Mon, 4 Feb 2008 22:31:36 -0700
  • WARNING against using Staples in shear walls/diaphragms Tue, 5 Feb 2008 23:55:07 -0700
  • Stapled shear wall "warning" Mon, 11 Feb 2008 22:41:56 -0700
  • Soils Reports under CBC 1802.2 Thu, 14 Feb 2008 07:24:05 -0700
  • Re: Strawbale Methods Thu, 28 Feb 2008 23:06:23 -0700
  • Calif. Seismic Retrofit Bill SB 1508 Fri, 7 Mar 2008 10:58:36 -0700

• Thor Tandy
  • RE: Glass guardrail support Fri, 4 Jan 2008 14:44:17 -0700
  • RE: Glass guardrail support Fri, 4 Jan 2008 16:33:49 -0700
  • RE: Glass guardrail support Fri, 4 Jan 2008 16:35:17 -0700
  • RE: Glass guardrail support Fri, 4 Jan 2008 18:05:57 -0700
  • RE: Dual - System ( frame+wall) Thu, 10 Jan 2008 12:57:02 -0700
  • RE: Dual - System ( frame+wall) Fri, 11 Jan 2008 11:22:49 -0700
  • RE: Glass guardrail support Mon, 14 Jan 2008 10:33:10 -0700
  • RE: Splicing of steel beam. Fri, 18 Jan 2008 11:43:46 -0700
  • RE: Roof Gardens Live load Tue, 22 Jan 2008 15:27:28 -0700
  • RE: Shop Drawings Thu, 7 Feb 2008 14:22:50 -0700
  • RE: Seismic load on retaining wall Thu, 20 Mar 2008 09:58:45 -0600
  • RE: review of another SE's design... Sat, 22 Mar 2008 10:02:04 -0600

• Tiffany Lorenzzi
  • STAAD.pro 2007and IBC 2006/AISC Seismic Provisions Wed, 6 Feb 2008 06:45:04 -0700
  • STAAD.pro 2007and AISC Seismic Table I-8-1 Wed, 6 Feb 2008 06:49:51 -0700
  • Pipe Rack Retrofit Thu, 28 Feb 2008 08:27:56 -0700

• Tom . Hunt
  • Debonding of precast plank topping Wed, 2 Jan 2008 08:23:01 -0700
  • RE: Concrete Strength Requirements for Residential Projects in SDC D or Higher Mon, 7 Jan 2008 10:54:44 -0700
  • RE: Out of Line Building Official? Tue, 8 Jan 2008 17:00:43 -0700
  • Re: More "plan check" stuff ... Tue, 8 Jan 2008 17:09:36 -0700
  • Re: Concrete Anchors Tue, 8 Jan 2008 17:13:46 -0700
  • RE: what's wrong? Tue, 15 Jan 2008 12:28:25 -0700
  • RE: 3-D modeling Wed, 16 Jan 2008 08:08:36 -0700
  • Re: ICC ESR REPORT 1772 & ICC ER 4945 (S.S.T. Epoxy) Thu, 17 Jan 2008 13:13:34 -0700
  • RE: Anchors - DS Anchor Thu, 17 Jan 2008 16:53:48 -0700
  • RE: enercalc V6 Thu, 17 Jan 2008 17:28:13 -0700
  • RE: L Bolts - Was enercalc V6 Mon, 21 Jan 2008 09:15:25 -0700
  • RE: 3-D modeling - ASCE 7-05 12.7.3 needs an exception for light-frame timber Mon, 21 Jan 2008 09:20:11 -0700
  • Re: Decoupling of anchor bolts Mon, 21 Jan 2008 09:25:06 -0700
  • RE: 4th CINPAR - International Conference on Structural Defects and Repair - 25-28 June 2008, University of Aveiro, Portugal Mon, 21 Jan 2008 09:33:28 -0700
  • Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 12:06:12 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate & bad EN Thu, 24 Jan 2008 07:47:01 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate Thu, 24 Jan 2008 07:48:17 -0700
  • RE: Retaining Wall Problem Thu, 24 Jan 2008 13:58:53 -0700
  • Re: Source for long drill bits in S.F. Bay Area ? Fri, 25 Jan 2008 08:01:16 -0700
  • Re: CONCRETE: Hot Base Plate Bearing on Concrete Wed, 30 Jan 2008 13:33:39 -0700
  • Re: Crane rail weld/assembly papers Thu, 31 Jan 2008 13:43:39 -0700
  • Re: CONCRETE: Hot Base Plate Bearing on Concrete Wed, 6 Feb 2008 08:48:03 -0700
  • light gage steel framing Thu, 7 Feb 2008 15:27:20 -0700
  • Re: AISC 341 - NonBuilding Mon, 11 Feb 2008 11:56:59 -0700
  • Fw: PLEASE READ NOW - Real virus Mon, 11 Feb 2008 17:44:42 -0700
  • RE: CBO Tue, 12 Feb 2008 09:27:18 -0700
  • Re: ASCE 7-05 Cantilevered Columns Wed, 13 Feb 2008 14:46:38 -0700
  • RE: ASCE 7-05 Cantilevered Columns Mon, 18 Feb 2008 09:14:40 -0700
  • Re: Chapter 17- IBC Wed, 20 Feb 2008 16:33:22 -0700
  • Re: L Bolt Dimensions Thu, 21 Feb 2008 15:37:59 -0700
  • Perforate shear wall design and combined shear and uplift on edge nails Fri, 22 Feb 2008 13:02:14 -0700
  • RE: Availability of 3.5", 5.5" Wide DF/HF Structural Glued Laminated Timber Mon, 25 Feb 2008 17:15:27 -0700
  • Hot Weather Concreting Thu, 28 Feb 2008 08:46:34 -0700
  • Danish Wind Turbine disintegrating - Feb.27,2008 Mon, 17 Mar 2008 10:14:55 -0600
  • Slab-on-Grade with Rack Loading Tue, 18 Mar 2008 17:41:25 -0600

• Tom Evans
  • RE: wood floor system for a Pool table Tue, 15 Jan 2008 11:01:07 -0700

• Tom Skaggs
  • RE: ASCE 7-08 Mon, 21 Jan 2008 17:02:45 -0700
  • RE: Aspect Ratio of Light Framed Shearwalls Fri, 25 Jan 2008 14:11:50 -0700
  • RE: en values in CBC Table 2305.2.2(1) Wed, 20 Feb 2008 16:21:32 -0700
  • RE: LARUCP Amendments Mon, 25 Feb 2008 11:46:41 -0700
  • RE: Safety factors for attaching screws to OSB Tue, 4 Mar 2008 08:28:05 -0700
  • LatPro V3.0 Mon, 10 Mar 2008 11:44:11 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 08:15:43 -0600
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 08:51:24 -0600

• Trib K Mittra
  • Fw: PLEASE READ NOW - Real virus Tue, 12 Feb 2008 04:28:22 -0700
  • Styrofoam seal at plywood shear wall sill plate Wed, 20 Feb 2008 14:39:22 -0700
  • RE: Styrofoam seal at plywood shear wall sill plate & bad EN Wed, 20 Feb 2008 14:44:47 -0700

• Truitt Vance
  • RE: Styrofoam seal at plywood shear wall sill plate Wed, 23 Jan 2008 11:55:15 -0700
  • RE: subgrade modulus Thu, 27 Mar 2008 09:14:59 -0600

• Tyler Derden
  • RE: AISC 341-05 Section 7.1 bolt shear strength a ductile limit state? Tue, 4 Mar 2008 07:50:44 -0700

• Wade Sticht, P.E.
  • Other List Servers Thu, 28 Feb 2008 15:27:51 -0700
  • Re: butchering steel stud webs - guideline? Fri, 29 Feb 2008 07:31:09 -0700

• welding_engr_rich(--nospam--at)charter.net
  • RE: A Welding question Fri, 25 Jan 2008 04:00:38 -0700

• Wendy Allen
  • RE: Simpson Titen HD not approved for use in concrete Mon, 11 Feb 2008 11:03:21 -0700

• Wesley Werner
  • RE: More "plan check" stuff ... Wed, 9 Jan 2008 12:21:39 -0700
  • Plate washers Tue, 22 Jan 2008 07:45:28 -0700
  • RE: steel connection software Tue, 22 Jan 2008 13:21:09 -0700
  • RE: Hand-held Calculator Recommended Tue, 18 Mar 2008 09:02:26 -0600
  • Slab-on-Grade with Rack Loading Tue, 18 Mar 2008 17:28:06 -0600

• Will Haynes
  • ASCE being attacked Tue, 25 Mar 2008 16:15:44 -0600
  • Re: Programs for cast-in-place Anchors Fri, 28 Mar 2008 14:09:49 -0600
  • Re: Fundamental Period Question ASCE 7-05 12.8.2 Sat, 29 Mar 2008 19:49:25 -0600
  • Re: Fundamental Period Question ASCE 7-05 12.8.2 Sun, 30 Mar 2008 20:48:08 -0600

• William.Sherman
  • RE: Gross overturning Thu, 31 Jan 2008 11:47:08 -0700
  • RE: Chain Link Fence Backstop Sun, 17 Feb 2008 11:14:47 -0700
  • RE: Is a garage partially open, open or closed? Sun, 17 Feb 2008 12:26:36 -0700
  • RE: CMU Bond Beam at Control Joint Sun, 17 Feb 2008 12:32:22 -0700
  • RE: IBC 2007 Wind calcs. Sun, 17 Feb 2008 13:03:22 -0700
  • RE: Is a garage partially open, open or closed? Tue, 19 Feb 2008 07:27:33 -0700
  • RE: Is a garage partially open, open or closed? Tue, 19 Feb 2008 09:00:21 -0700
  • RE: ASCE 7-05 Cantilevered Columns‏ Mon, 25 Feb 2008 12:26:02 -0700
  • Concrete exposed to seawater Fri, 29 Feb 2008 16:17:27 -0700
  • RE: Concrete exposed to seawater Mon, 3 Mar 2008 12:19:46 -0700
  • RE: Concrete exposed to seawater Tue, 4 Mar 2008 07:44:54 -0700
  • RE: Las Vegas Sign Structure Tue, 4 Mar 2008 07:55:01 -0700
  • RE: Las Vegas Sign Structure Tue, 4 Mar 2008 15:30:47 -0700
  • RE: AISC eLearning Tue, 4 Mar 2008 16:29:17 -0700
  • RE: subgrade modulus Thu, 27 Mar 2008 08:28:05 -0600

• Wontae Kim
  • Any reference related with ACI 13.3.6 (Two-way slab design) Tue, 15 Jan 2008 11:49:46 -0700
  • Hand-held Calculator Recommended Tue, 18 Mar 2008 06:05:07 -0600

• y.hamida
  • Re: wood floor system for a Pool table Fri, 4 Jan 2008 12:04:12 -0700
  • Re: Handrail Loads vs Short Term Fri, 4 Jan 2008 12:18:27 -0700
  • Dual - System ( frame+wall) Thu, 10 Jan 2008 12:39:42 -0700
  • Re: Dual - System ( frame+wall) Thu, 10 Jan 2008 16:14:22 -0700
  • Re:3-D modeling Wed, 16 Jan 2008 14:01:47 -0700
  • Re: Splicing of steel beam. Fri, 18 Jan 2008 16:38:26 -0700
  • Re: CMU Infills Sat, 26 Jan 2008 05:09:27 -0700
  • Re: CMU Infills Tue, 29 Jan 2008 16:10:40 -0700

• Yi Yang
  • RE: Lighter Loads in IBC vs. UBC and Enercalc 6.0 Wed, 9 Jan 2008 17:15:57 -0700
  • RE: Wood LEED Thu, 13 Mar 2008 13:51:56 -0600

---

Mail converted by MHonArc